Get New Books Free

Reverse Lunge with Diagonal Lift

Lunges are a fantastic functional lower body exercise, and the benefits can be enhanced by adding an upper body component to the basic lunge movement pattern. One of the most productive total body lunge variations is the reverse lunge with a diagonal lift.
The exercise improves hip mobility in the front of the rear leg, while also increasing strength and stability in the front leg and increasing core strength and mobility. Specifically, it improves hip flexor mobility while training the body to move smoothly in the spiral line. It also encourages proper tri-planar movement.
Start standing with feet shoulder width apart in upright posture. Hold a medicine ball, dumbbell, or kettlebell (or even a body bar) positioned at the right hip pocket region. Step back with the right leg to perform a reverse lunge. At the same time move both arms diagonally up and back over the left shoulder until a comfortable stretch is felt in the anterior (front) of the right hip. Do NOT allow the back to arch. Pause in this position for one or two seconds.
Do 10 – 15 repetitions on one side then repeat on the other side. It is important that you keep both feet facing forward and keep your trunk upright throughout the movement.
Regressions:
Perform the movement without a medicine ball, dumbbell, or bar
Start in the split stance lunge position instead of having to step back
Progressions:
Increase weight you are holding.
Perform the movement in an alternating side manner vs one side at a time.
Video Links: https://www.youtube.com/watch?v=JDyGhcm-aVs

In One Sentence™ – A Battlefield Hardline Main Weapons Overview [Very Short Reviews Of Each, Currently Text-Only]

[In light of the DOUBLE XP EVENT going on right now for Hardline, I wanted to get this hopefully-helpful information up right away for everyone – so here it is without any Screenshots yet – I am collecting some together and plan to place them in-line within, Soon™]

In One Sentence™


A Battlefield Hardline

Main Weapons Overview


By: The Game Tips And More Blog


Presented in a Document-sorta-but-not-really format

I was in the Battlefield Hardline Beta, but didn’t write about it at the time [and have only played off and on since then ‘for fun’ – that is, not really getting into collecting information for others, that they could use – well, other than one Introduction To The Sabotage Gadget tutorial I did quickly a while back… I wish I did more, but I wasn’t feeling up to it, sorry all..].


Recently, I was testing out Origin Access (signing up for one Month, to see if you ‘lose’ things you have Unlocked/Earned after Cancelling the Subscription – which I will write about once it expires) and I have been playing a bit more as well [as I can], wanting to go through each Weapon in Hardline and give a really short ‘Review’ of each, to give everyone a Basic Overview of them – I dubbed these ‘mini-reviews’ the highly-creative-and-original “In One Sentence”™!

Here then, is a listing of all of the ‘main’ weapons in the game, that is, the Primary (eg. Rifles) and Secondary (eg. Pistols), the Thrown (eg. Grenades) and Melee (eg. Knives) categories, with a one-sentence ‘review’ of every single one of them – at least for all of the ones I have Unlocked and have available since starting Origin Access [which opened up all of the Expansion Weapons – there are only about 3-4 types missing out of all of them now… I may ‘tweak’ the descriptions over the next little while but other than small phrasing changes and adding Images later, this is the list, ready to go.]

The list itself is divided into the Classes available in the game, listing all Primary and Secondary weapons available to that class to Purchase and Use, roughly as they appear on the in-game Menu Lists, with the Thrown and Melee weapon categories at the end. As such, there are some overlap/duplicated entries when written in Text form (eg. a pistol found in the Professional list will also be listed in the Operator list, if they both can use them, with the same or nearly the same Review/Overview for each listing). This way though, you can just skip to the Class section you are interested in playing and see the Weapons as they appear in the game, not having to worry about searching for the Weapon name itself.

I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. perhaps you want a ‘slow and hard-hitting’ weapon or perhaps you prefer a ‘fast-shooting with lighter damage’ one, and so on) – hopefully this information will help you out in some way, especially if you are new to Hardline (I have already seen an influx of new players since recent EA/Origin Sales, which is great to see). Enjoy, dear reader, and get in there for the Double XP Event on now – and See You In The Game!

Rating Key (if applicable to weapon, when used):

? = Not sure [yet] if they are Criminals-only or Cops-only usage

* = Weapons I ‘Liked’ (fit my playstyle(s), is unique in some way)

** = Weapons that are A Personal Favourite (I use a lot or ‘mainly’ would use)

Scout Elite = A fairly fast-shooting and silence-able sniper rifle with medium-high damage, this Default Professional weapon only improves with Unlocks. **

R700LTR (Cops) = A slow-firing but powerful killer that is silence-able, Magnum Rounds can be Purchased after 50 Kills to make Vehicles cry. *

AWM (Criminals) = Feeling much slower than the Scout – but also seeming more powerful – the first thing I would want to unlock is the silencer for this big boy.

388-Recon = Feeling like it has decent ‘punch’ and good range – if the Scout is “fast” and the AWM is “slow” then the 388-Recon is “middle-of-the-road”, in terms of rate of fire, it seems. *

.300 Knockout = What was once a fast and sleek one-hit-kill-machine, worthy of its’ lengthy and difficult Unlock, this rifle has since been Nerfed™ with a slower firing rate and its’ one-hit-kill ability taken away – and while still powerful and silent, to those who used it in it’s former glory, it is now a slow and decrepid version of it’s former self.

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M98b = This bolt-action sniper rifle packs a mean punch – it has so much power it can shoot pilots inside helicopters [I’ve done it! Once! lol] and has very little bullet drop-off – it can even be silenced, but it can it ever be equipped with a Straight-Pull Bolt (to allow you to shoot again without going out of scope) and its firing rate is pretty slow.

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

SOCOM16 (Cops) = A medium-damage semi-automatic rifle that can be silenced, it feels somewhat inaccurate – but it does have the ability to fire quickly.

SR-25 ECC (Cops) = A semi-automatic rifle that can be silenced, its decent damage along with its fast firing rate will make this a formidable weapon to use, if the medium-low recoil (which feels less than the SOCOM16) can be accounted for. *

M82.416 = Even though the firing rate of this un-silenceable rifle has been severely reduced since I last played with it in Hardline (with the ability to fire a number of times a second back then), it remains quite the hand cannon (firing about once every second now) – with so much power there is very little bullet drop (and it can still take out pilots inside helicopters) – I think it did more damage back then too, but it is still nice to use for the sense of power it brings. *

RO933 M1 = A silence-able rifle that seems to be able to fire as fast as you can click, I like to run this one with an Infra-vision scope, hide in the bushes – and let the bullets fall like hail upon the enemy from the shadows. **

SAIGA .308 = A fast-firing rifle, this one ‘feels fun’ to run with even though it is a little inaccurate, because it has decent damage output. *

PTR-91 = A rifle with mediocre damage, its’ fast fire rate can make up for it, if the medium-ish recoil can be compensated for.

SP-AR = Although fast-firing, this rifle isn’t very accurate while doing so, with its’ high recoil – at least it as a neat, unique ‘report’ [sound].

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, staying on the edges of the area, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).


RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

M110K5 = [N/A, Haven’t Unlocked yet sorry]

1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

G18C = Although fast-shooting, this pistol feels a little inaccurate.

93R = With good accuracy and higher damage, this little bad boy can even be silenced, eventually. **

MAC-10 = While the recoil will have you shooting at the sky for the most part, this little guy will spit out bullets and damage faster than a shaken baby spits out broken teeth to make up for it – it’s just that you may be out of ammo before the enemy dies.

MP9 (Cops) = Surprisingly accurate if you can compensate for the recoil, this little fella doesn’t have much in the way of scopes, but it can be silenced after 90 kills. **

TEC-9 (Criminals) = Although fast-shooting, this little guy isn’t the most accurate puppy in the litter (but if you use the sights it does help) – it also doesn’t do the greatest damage, it seems.

IMPROVISED GUN = With decent damage output, decent accuracy and a nice ‘feel’ to it, this little fella is fast becoming a Personal Favourite. **


DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

870P MAGNUM = Although this is a slower-firing pump-action style shotgun, it has very high damage output and a little bit of range, too. *

SPAS-12 = While still a pump-action shotgun, the SPAS-12 fires faster than the 870P MAGNUM and it feels like it has a bit more accuracy, too – it just doesn’t do quite the damage of the 870P.

SAIGA-12 (Criminals) = With a nice rate of fire, it feels like it does damage somewhere between the SPAS-12 and the 870P MAGNUM. **

STAKEOUT (Cops) = With damage a bit lower than the 870P or the SPAS-12, shotgun ‘feels’ quite a bit more accurate – and with its’ nice rate of fire (for a pump-action), this beauty quickly became a Personal Favourite to run with. **

M4 (Criminals) = With a nice rate of fire and decent damage, this cannon is quickly becoming a Personal Favourite. **

KSG12 (Cops) = Although a pump-action shotgun, this thing hits like a horse’s hoof to the head – I dubbed this cannon the “Kiss The Ground” shotgun right away. **

1887 = Although powerful, this old-west-style shotgun shoots slow – when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

DOUBLE-BARREL SHOTGUN = A true source of unearthly power once unlocked, the DOUBLE-BARRELLED SHOTGUN will make you feel like a living angel of death, as even one barrel’s worth will end an enemy close by; just point this finger of god at an enemy and say “die” – and as long as they aren’t too far away – they will do it for you. Worth the effort to Unlock and a Personal Favourite. **

SA-58 OSW = I call this “The Recoil Machine”, as unless you fire one bullet at a time, you will be covered in rifle Recoil.

SCAR-H (Cops) = This silence-able machine gun has some recoil, but it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (especially if ‘tap-shooting’ for short bursts). *

FAL (Criminals) = Although this rifle has a fair amount of recoil, it seems to have high damage output – if it can be compensated for, this could be a nice heavy-hitting weapon to run with. **

HCAR (Cops) = With a medium amount of recoil, it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (even during continuous fire, if you can control the muzzle). **

HK51 (Criminals) = Although it has a bit of recoil, this silence-able rifle has a nice ‘smooth’ feel to it. **

SG510 (Cops) = With a nice feeling of accuracy (aimed fire, with recoil compensated for) it also feels like a decently-hard-hitting weapon – this could be a new Personal Favourite for me. *

M39 EMR = With a little less accuracy than the other Battle Rifles, the M39 EMR ‘feels’ a bit smoother though, with a nice rate of fire and the ability to be silenced – it’s just too bad it doesn’t have Extended Magazines available, as it always feels like it’s running out of ammo just a tad too soon. *

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

45T = This pistol doesn’t seem to do much damage, nor does it shoot very fast – but that slow rate of fire gives it decent accuracy.

.40 PRO (Criminals) = While this pistol is decently accurate, it only does mediocre damage and it doesn’t fire very fast – another enemy will probably kill you before the one you are shooting at dies, unless you ‘get the drop on them’.

M1911A1 (Cops) = While it doesn’t shoot very fast or do above medium-ish damage, this WWII-era pistol seems to be decently accurate – but it will win no awards.

BALD EAGLE = With huge damage output, this ‘Hand Cannon’ will feel like you are wielding a hand-size shotgun – too bad it can’t be silenced or have longer scopes put on it. *

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

MP5K = Fast-shooting and if you can compensate for the recoil, pretty accurate – it even works great silenced. *

M/45 (Cops) = Not as ‘smooth’ handling as the MP5K, this SMG feels ever-so-slightly more accurate and has decent damage, to boot. *

MPX (Cops) = A fast-shooting and fun smg to run with, it seems to have a little less recoil than the other SMGs but doesn’t ‘feel’ as accurate, if that makes any sense – it is still pretty good and if you are able to compensate for recoil, a nice gun to use. *

K10 (Cops) = Insanely insane with an insane firing rate, it has been literally only for the insane since the Beta – and maybe those who don’t like keeping bullets in their gun – heaven help anyone if you point this at their head. **

FMG9 = Suppress-able at 90 kills, this fast-shooting SMG ‘feels’ more accurate than its’ kindred, especially after unlocking the Laser Sight and some Scopes – and with a unique stock animation, it is a ‘fun’ weapon to run with. *

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

SCORPION = A fast-shooting gun (almost as fast as the K10 it seems), this silence-able fella ‘feels’ ever-so-slightly less maneuverable than its’ brethren – and it does a bit less damage, too – otherwise, it would have been a Personal Favourite (I have almost unlocked the Suppressor already on it). *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

UMP45 (Criminals) = Although slightly more accurate feeling, it also feels like it shoots slower and hurts a little less than similar weapons.

UMP9 = Silence-able after 70 kills, this SMG ‘feels’ a little bulky to wield, but seems like it does a notch more damage than its’ counterparts. *

UZI (Criminals) = Silence-able but unfortunately “The Uzi” in-game seems different than it does in the movies – it shoots far slower than on the big screen, but it is also more accurate here. *

M5 NAVY (Cops) = Making you feel like you’re in your own 80’s movie, the M5 NAVY packs a punch and seems to keep accuracy even out to mid-ranges (aimed or not) – quickly making this a Personal Favourite. **

M12S (Cops) = “The Spaghetti Uzi” ‘feels’ ‘clunky’ and a ‘bit’ ‘inaccurate’ to me, ‘but’ it seems to have a ‘few more’ bullets than ‘similar weapons’, which ‘mostly’ ‘makes up for it’, quote marks. *

AUG PARA (Criminals) = While this Criminal-only SMG ‘feels’ like it does decent damage and is fairly accurate, it ends up being only ‘mediocre’ in… well.. Everything.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them, until it shows up on the Kill Log… **

MX4 = Although very ‘average’ in all stats in-game, the stylish MX4 ‘feels’ like it is an efficient damage-wielding gun that is fun to use for some reason – I just kept on using it, eventually unlocking almost everything I wanted in each Attachment category, despite losing many shootouts with it.

M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

RO933 .300 BLK = [N/A, Haven’t Unlocked yet sorry]

M110K5 = [N/A, Haven’t Unlocked yet sorry]

1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.


MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

.38 SNUB = Seen in almost any cop movie between 1970 and 1990, this little guy fires fast, ‘moves’ smoothly and is nice and accurate – but it better be because you only get five shots to work with – and there are hardly any add-ons for it at all. *

.44 MAGNUM (Criminals) = The Classic is here, from Movies to Real Life mayhem, the “fourty-four” is a hand cannon of damage to all it gets pointed at, nuff’ said. *

.410 JURY = While not the fastest firing, this little bad boy is literally a hand-size-shotgun (it fires small shotgun-style shells) and since it is smaller than the Fourty-Four and The Eagle – but seems to blast out the damage even out to close-to-medium ranges – this weapon is fun-as-hell to run with. A Personal Favourite. **

.357 RS (Cops) = While still a “magnum” like The Fourty-Four, it doesn’t seem to do quite as much damage – or have the range the .44 MAGNUM has – but it has a bit more ammo at 8 rounds.

T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

R0933 = With a high rate-of-fire and equipped with a few little add-ons ‘out of the box’, the RO933 ‘feels’ smooth and easy-to-use, even if it isn’t the fastest killer. *

AKS74U (Criminals) = With a notch up in damage and a couple notches up in accuracy from the RO933, the AKS74U ‘just feels right’. **

G36C (Cops) = Having not seen a “G36C” myself since BF3, this felt like it’s ‘little brother’ – a ‘smooth’ to maneuver with, compact, pretty accurate gun. *

SG553 (Cops) = With the highest average in-game stats than the other Carbines, this weapon should “kick criminal butt” – and that, it does (especially with some Add-ons). A Personal Favourite.**

CAR-556 = Packing a wallop of hit damage and feeling pretty accurate, even at range in short bursts, I have no idea why I can’t ‘get into’ using this gun more – perhaps it is the ‘harsh’ sound it makes? LOL *

ACWR = While the in-game stats show it as fairly inaccurate, I found the ACWR to do decent damage, ‘feel’ smooth to use – and do a nice bit of hurt to the enemy (even at range if you can compensate for the bit of recoil). *

AKM (Criminals) = If you can deal with the huge amount of recoil this gun has, it does seem to have a pretty accurate, crazy-damage, first shot and high-damage short bursts – other than that, it is actually ‘average’ in all stats, in-game.

M16A3 (Cops) = Accurate and with a fast firing rate, silence-able and reminiscent of “movie M16s”, there isn’t much to not like about this weapon. A Personal Favourite. **

M416 (Criminals) = This carbine ‘feels’ like it handles a lot smoother than the AKM, feeling more accurate as well, even though the in-game stats are comparable.

ARM = [N/A, Haven’t Unlocked Yet, sorry]

L85A2 = With a bit of recoil already, it is accentuated by the pre-loaded 4X scope it comes with – but if you are just ‘runnin-and-gunnin’ with it, it feels like a formidable weapon up close – it just seems to have accuracy problems (bullet spread) at anything other than point blank range.

MDC (Cops) = With what seems like a high amount of recoil and inaccuracy, the MDC doesn’t seem to live up to its’ stylish look – it ‘feels’ a bit worse than the L85A2, in regards to ‘handling’.

FAMAS = While quite inaccurate if you just ‘spray-n-pray’, aiming seems to help a lot with this rifle – it ‘felt’ a lot better too, after Unlocking the Extended Magazine – and it seems like it could only improve from there.

F2000 (Criminals) = This huge wall of metal feels like you are carrying a rocket launcher, but with its’ fast firing rate and decent accuracy, there’s not much to dislike about it – other than it doesn’t seem to ‘hit’ as hard as I would have expected . *

SAR-21 = In-game, the stats on this weapon are very ‘average’ – and it ‘felt’ that way, except for the accuracy which, especially if you can compensate for it, seems ‘high’, actually – and it only seemed to get better as I Unlocked more Attachments. *

RPK (Criminals) = With a large magazine size (50) and how this gun ‘feels’ heavy-hitting, while a bit inaccurate at first, I think it can be a formidable weapon after some Unlocks.

RPK-74 = While comparable to the RPK (of course), the ‘74 ‘felt’ a little more accurate, actually. *

AUG A3 = The AUG A3 already ‘felt’ pretty accurate, but with ‘included’ 4X scope and if you can compensate for the recoil, it is a pleasure to shoot – too bad it doesn’t seem to do high damage (but about a ‘medium’ amount). *

M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **


M110K5 = [N/A, Haven’t Unlocked Yet, sorry]



1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

92FS = Silence-able but not the fastest-shooting pistol, nor the most damaging – it does seem accurate though, if you can compensate for the recoil – maybe it would become something worthwhile after some Unlocks.

P226 (Cops) = Although fairly fast-firing, it is somewhat inaccurate – I would say it is the ‘slightly faster but less accurate version of the Criminals-only CZ-75’ if I had to compare it.

CZ-75 (Criminals) = Although fairly accurate, it is somewhat slow-firing – I would say it is the ‘slightly slower but more accurate version of the Cops-only P226’ if I had to compare it.

G17 = Nicely accurate and firing as fast as you can click, it seems, the G17 became an instant Personal Favourite. **

FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever (other than the red dot sight it comes with). **

T62 CEW = Only one word for this one-hit-disabling “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

M67 FRAG = With decent range, ‘The Poison Apple’ does huge damage – I think it’s killzone has been increased since Beta – a room-clearer (as long as they are in line-of-sight), but you only get one. *

M18 SMOKE = While it doesn’t damage anyone, it does provide some good ‘cover’, as it blocks not only seeing people but also spotting.

M84 FLASHBANG = While sounding very useful at first, with the faster pace and highly mobile opponents in the convoluted spaces of Hardline, having an effect with this is rare – although I have had it used on me and have seen people not able to see well for the short time it is in effect (looking around or shooting aimlessly) – it is very rare to be helpful it seems, but it happens.

GAS GRENADE = Quite useful, as it blurs the view of the enemy (affecting their aim as well) and sometimes a killer (albeit slowly) – unless you want to be affected yourself, put on a Gas Mask Gadget. **

INCENDIARY GRENADE (Cops) = Create your own “Napalm Pond” with this grenade-of-fire, which has a good range and good ‘spread’ (the area of effect is fairly big) – the only drawback is that people have to stay in it for a bit to die and some could have Fire Resistance Masks to nullify it (but that is only the Operator Class and only if they have the Robbery Expansion/DLC). *

MOLOTOV (Criminals) = The ‘homemade’ version of the Incendiary Grenade, it has the same area of effect and does the same damage, it seems – and could be nullified by the FR Mask (but as above, that is only the Operators and only if they have the right Expansion/DLC). *

THROWING KNIFE = Slightly slower to deploy and slower to travel than expected, these types of knives are fairly heavy [in real life, I used to own one when I was younger] so they have some drop to account for; but your opponent will die when one knocks them over, making these little guys fun as heck to use. **

BASEBALL BAT (Criminals?) = No matter where you grew up in the world, you will know how to wield a wooden stick – which means this guy can come out fast and keep on swingin’ – do it from behind for a Takedown. *

POLICE BATON (Cops) = A staple of Authority worldwide and resembling the Japanese ‘Tonfa’, this bad boy will knock out a perp in two hits if you don’t take him down from behind. **

NIGHTSTICK (Cops) = Like a Police Baton without the little handle, the Nightstick feels fast to use, if a bit mundane to look at.

BLACKJACK (Cops) = Although still small and slim, this little guy feels ever-so-slightly slower than the other ‘sticks’, for some reason.

COLLAPSIBLE BATON (Cops) = I had no idea there would be such a long delay to deploy this little fella, since he’s so short…but don’t worry he becomes longer.

SHOVEL = As a farming tool, I feel that it has a sufficiently-long delay time to whip-it-out… and that’s enough double entendre for now.

GOLD CLUB (Criminals?) = Feeling like it wields ever-so-slightly slower than say, a baton or bat, it is still wicked fast – and you can do a non-lethal takedown (from behind), to Interrogate the enemy (finding out their positions on the map). *

LEAD PIPE (Criminals?) = Quick to draw and with a somewhat-satisfying ‘clunk’ when you hit an opponent, this guy is fast becoming a Personal Favourite. *

SLEDGE HAMMER (Criminals) = Slow and heavy to draw, this baby packs a mean punch once it does show its’ presence on the battlefield – a one-hit kill, it also takes down doors and crumbles thin walls with ease. *

BREACHING HAMMER (Cops) = The lawful version of a Sledgehammer, this big boy is also slow and heavy – but it forces others to ‘respect your authoritah’ once drawn as it one-hit-kills and takes down doors and thin walls with ease. *

CROWBAR (Criminals?) = If you’ve lived in any industrialized country for a time, you know what a crowbar is and what it can do – and while not seeming quite as quick-to-deploy as say, a bat or a baton, the muffled ‘donk’ sound it emits when hitting someone makes this weapon a pleasure to work with. **

KNIFE = Fast and deadly, nuff’ said.

SHANK = A weapon born out of necessity, the Shank is fast and deadly and other speedy and dangerous words… you get the point – or rather, they will. *

BOWIE KNIFE = This classic weapon, interestingly named after an owner (not its designer) feels ever-so-slightly slower than its’ other bladed brethren.

CARBON FIBER = Although sleek and stylish looking, there is an ever-so-slight delay to deploy this bad boy – but it does seem to have a unique takedown animation that can happen.

SCOUT = A fast knife that will cover your hands in blood if repeatedly wielded in a cluster of enemies.

SEAL = It feels ever-so-slightly slower than say, the Scout Knife, but it is still ‘wicked bad’, as it should be.

SURVIVAL = With an animation similar to the Bowie from the back and a seemingly-unique kill animation from above [that I have seen so far], this knife works well, even if it does seem ever-so-slightly slower than the other knives, for some reason.

TRENCH = With a ‘side animation’ similar to the Shank and a ‘front animation’ similar to the Bowie [that I have seen so far], the look of this fella makes it a touch more satisfying to kill with. *

ACB-90 (Criminals?) = With side-killing animations similar to the Shank and rear-killing animations similar to the Bowie [that I have seen so far], it does seem to deploy pretty quickly. *

DEVIL’S TOOTHPICK = The motions for using this ‘asylum invention’ on people are more ‘hectic’ and seem to shout “mayhem” (you stab less and hack more, it appears).

FIRE AXE (Cops?) = Live out your Team Fortress 2 “killing people who make W+M1 jokes” Pyro urges, or perhaps your childhood dream of being a “Firemans” (or a “Firelady”) with this slow-to-wield but ‘kick-axe’, axe. *

MACHETE = This traditional and practical knife seems to deploy quite slowly – although it does great damage and appears to kill in one hit [so far].

CLEAVER = While not as slow to use as say, the Machete or Axe, it is still “medium-slow”, a lethal takedown (even from behind) – but it doesn’t seem to have any ‘unique’ animations [that I have seen so far].

KARAMBIT = Fast and Deadly, there really is nothing else to say about this ‘little devil’ other than those two words – really, I’m not just being lazy here. *

INQUISITION SWORD = Slow and Heavy to wield – but a one hit kill as you overpower your foe – be sure to shout “There Can Be Only One” in real life when you use it for maximum fun-ness. **

When the Betrayal Expansion was released in March of 2016, a Battlelog Post stated: “Now that various weapons have been released to all classes with the base game update, you can pair a Mechanic with a sniper rifle, or an Enforcer with an SMG. You might not be as effective as you would with your class weapon, but the option is there.” Meaning, if you are utilizing a Weapon that is normally ‘outside’ of your Class, you will be using it with reduced effects!

Again, as stated above, I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. ‘slow and hard-hitting’ or perhaps ‘fast-shooting with lighter damage’, and so on) – hopefully this information will help you out in some way. Enjoy – get in there for the Double XP Event on now – and See You In The Game!

Fads Pose Dangers, Don’t Listen to Dietary Fads

However, we need to be careful on this question of diet. Many different ideas are prevalent today. Don’t believe all you hear. There may be some elements of truth in a few of these dietary fads, but usually there is some foolish notion hidden underneath that is neither in harmony with science nor with common sense. Don’t be misled.

Regardless of the many fantastic claims that you may hear, there is no one perfect food. There is none that will meet all the needs of the body any more than there is one perfect material that will serve every purpose in building a house. The best diets are those in which there is plenty of variety. Then if any particular element is lacking in one food, it may be amply provided in another. This is one excellent way of avoiding deficiencies in your diet.

Variety is most important. But it is not the complete answer. We must also use discretion in the choice of foods. Some things that may look tasty are not always healthful and nutritious. Foods that are highly refined are less likely to contain the vital elements to meet the needs of the body. Modern food processing may have its good points. But sometimes the vitamins and minerals are lost in the refining process. It is better to use fresh foods whenever they are available. But be sure that they are really fresh.

Diet Start

Some people tend to think that malnutrition is a problem among the less-favored classes of the world. While this is true, it is surprising how often those with higher incomes also suffer from a different type of malnutrition. They eat plenty of food, but mostly of the wrong type. This so-called “hidden hunger” is very common in large cities, where more artificial living conditions prevail. Modern methods of marketing are providing a wider range of foods. But far too many people still prefer to live on devitalized foods that are woefully inadequate. It is these devitalized foods that lead to hidden hunger.

Such diets fail to provide the body with the right building materials that will keep it functioning properly. Foods that contain a high concentration of sugar and other carbohydrates may provide energy, but other important elements are usually lacking. Soon the organs begin to lose their normal powers of operation. The vital processes of the body are slowed down, and a toxic condition develops. The delicate balance of nature is upset, and the whole body suffers.

It is amazing the amount of food that one person may consume in his lifetime. Someone has estimated that we eat up to 1,400 times our own weight in a lifetime of seventy years! Think of how much money we spend in buying all this food! Surely such an expenditure as this is worthy of our closest study. Are we buying health, or weakness and disease? A balanced diet is the very best type of insurance against those degenerative diseases so common today.

It is true that diet alone is not the answer to all of our health problems. Other things must also be considered. But a well-balanced diet will always help to restore those body tissues that have been laid waste by serious disease. And what fun we can have while we are getting well again! So much depends on the attitude of the mind.

Mental Attitudes Important

Centuries ago the wise man gave us a great scientific truth when he said, “A merry heart doeth good like a medicine.” This is absolutely true. It is the optimistic person who usually makes a good recovery. Because he is happy in himself and confident in the future, his health naturally begins to improve. His whole body responds to the sheer joy of living.

But the wise man did not stop there. He also added these significant words: “A broken spirit drieth the bones.” This observation is just as true as the other. A pessimistic attitude soon affects the whole body. It slows down the circulation of the blood. It interferes with good digestion. It takes all the joy out of living. In the end, it may so completely change the individual that he becomes old and worn out long before his time.

Our mental attitudes are very important, particularly as they affect this question of diet. Many of us are shortening our lives without fully realizing what we are doing. Some of us eat too much, often for no other reason than to soothe our injured feelings. Or perhaps we do not take time to eat sensible meals. We grab something and run. We are in too much of a hurry. Then we wonder why we are weak and sick. We do not seem to realize that our diet has much to do with our endurance and also with our ability to resist disease. All the vitamin pills in the world will not make up for the lack of a sensible way of living.

Millions of people are spending fortunes trying to win back their lost figures and restore their flagging energies. All they needed was to apply a little common sense in the first place. No one can hope to have an attractive appearance, a healthy skin, and a clear mind unless he is willing to use discretion in choosing his meals. Even good foods, if taken to excess, may destroy the vitality of the body. Anything that is overdone may cause trouble, even too many vitamins.

A balanced diet is the very foundation of good living. To keep the body functioning smoothly and efficiently, it must be supplied with a constant stream of essential nutrients. This must be clear to all. Yet, it is a shocking fact that many farmers and dairymen are more interested in how they feed their cattle than in how they feed their children! Of course, it pays to see that cattle are well fed. But isn’t it time we begin to think about ourselves and our children as well?

Today, thanks to modern medical discoveries, we have less to fear from serious infections. But degenerative diseases are becoming more frequent on every hand. How can these be avoided in your own particular case? This is something you should feel free to discuss with your own family doctor. He is the best one to advise you on such matters. But there is no question that a good, sensible diet will always help. And when we follow such a program, we will feel stronger and more energetic, our mealtimes will be happier, and we can look forward to enjoying better health for years.

MODERN ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

Here is a mesmerizing seeks two-bedroom apartment with contemporary charm of events celebrating the beautiful Scandinavian style. The trough has two bedrooms and a kitchen year covers an area of ​​74 square meters. According Alvhem open plan living, social nucleus in apartments with high ceilings, walls painted in immaculate white, the beautiful oak floors and large windows. Splashes of color brighten the interior and seats with the elements that seem inviting visitors screaming. The kitchen island of brass with a thick sandstone table creates a social atmosphere that is sure to make any cook happy. The table has a sink sub-pasted from Blanco, who is both stylish and practical. From the terrace one has a spectacular view of the beautiful area and a perfect place for relaxation. What an inspiring use of space for a modern two-bedroom apartment!

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

Knoxville News Sentinel featuring Kurt and April Nitzsche

Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
You can view the online article here. 

WORKOUT ANYTIME in Buffalo Grove Patch

WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

24/7 Gym Opens in Buffalo Grove
By: Cristel Mohrman

Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

“We really like this location a lot,” co-owner Eric Nagel said.

(Read More)

Peanut Benefits for Health

PEANUT BENEFITS FOR HEALTH

Peanut Benefits for Health – Peanuts are legumes that take the benefits to the area of the roots are forming pods, do you know if the bean plants it has the advantage of a very remarkable in the area of agricultural land, the reason is because the beans are plants that collaborate with types of mycorrhizal fungi to synthesize N in the air become available to the plant, N that includes nutrients that are needed by plants in large enough quantities, land former planted beans have levels of N were pretty much up intake N for the next crop is still there. Not only useful for agriculture, but peanuts also have benefits for our health.
Peanut Benefits For Health - 1
Now let us try to discuss specifically about the benefits of the bean plants to our body and how much is the benefit that we can take from this pod peanut plants. Consider the benefits of peanuts below:
Peanut Benefits for Health
1. Helps To Increase Fertility
For you are the woman I’m sure you’ve got the point. Peanuts contain folic acid, according to research women who ate peanuts 400 micrograms of folic acid have a lower risk of having a baby born with a serious neural tube defects up to 70% at the time before pregnancy and early pregnancy
2. It Can Prevent Painful Gallstones
During 20 years of research have shown if by consuming 1 ounce of peanut butter a week can reduce the risk of developing gallstones by 25%.
Peanut Benefits For Health
3. Can Help Reduce Depression And Stress
Peanuts are a good source of tryptophan, the role of these substances can increase serotonin antidepressant effects (which can affect the atmosphere in the heart) if there is an increase in the amount of serotonin in the blood.
4. Can Improve Memory
The beans have a content of vitamin B3 or also often called by naisin content is also beneficial to maintain the health of the brain and improve memory.
5. Lowers Bad Cholesterol
Peanuts contain cholesterol substances that are good for our bodies, as well as the good cholesterol can reduce cholesterol levels and can control the evil by means of dominating it.

Hopefully article Peanut Benefits for Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

Deals and Sales: Saints Row 2 and Syberia II, TotallyFree™ [Notification]

Update: As of Sunday, April 23rd, Saints Row 2 is no longer available for Free, but Syberia II still is

I haven’t been feeling too great lately (hence my not posting for a while) – but I wanted to make sure and come and get a quick notification out, for those that don’t know and are interested – that I saw two games being given away TotallyFree™ right now:

Saints Row 2, the open-world, GTA-style Action game is at GoodOldGames (now just GOG, they also offer newer titles these days), found at GOG.com

and

Syberia II, the third-person, mouse-driven Adventure game is being given away at Origin’s “On the House”, found at Origin.com

Both are completely free, so go get them now! GOGOGO

[Note: I do not get any compensation in any form for mentioning these games or companies here (there are no ‘referrals’ or ‘trackbacks’ in the links above); I am just a gamer who likes to share things I figure out and find on my own here, with you, other gamers… Have fun!]

Berberine – for Cancer Prevention, Anxiety, Depression, Increased Fat Burning, and More!

Berberine – for Cancer Prevention, Anxiety, Depression, Increased fat burning, and more!

Berberine is a yellow alkaloid found in several plants/herbs such as goldenseal and phellodendron.   It is a powerful plant chemical with proven antibacterial, anti-inflammatory, anti-diabetic, anti-cancer, and immune enhancing properties.    Herbs containing berberine have a long history of effective use and there is considerable science backing these uses.
It is also extremely helpful for treatment of seasonal allergies traveler’s diarrhea, food poisoning, and as an oral hypoglycemic for Type 2 diabetes.

As per Dr. Michael Murray Berberine has been shown to: 
  • Produce results in clinical trials in improving Type 2 diabetes on par or better than conventional drugs including metformin.
  • Improve blood lipid levels better than statins.
  • Lower blood pressure in many subjects as well as any class of antihypertensive medication.
  • Improve liver function and promote anti-obesity effects.
  • Exert significant beneficial effects on digestive health and the microbiome.
  • Produce very encouraging experimental data in a wide range of modern health issues including cancer, Alzheimer’s disease, Parkinson’s disease and others.
How does Berberine work?

Berberine activates adenosine monophosphate-activated protein kinase (AMPK).  AMPK is sometimes referred to as a “metabolic master switch” because it plays an important role in regulating metabolism.

AMPK causes a cascade of effects within cells involved with maintaining energy homeostasis.  AMPK helps shift energy towards cellular repair and maintenance.   It has many of the same effects as increasing exercise while at the same time restricting caloric intake.

Other benefits of Berberine include:
  • Slowing the release of free fatty acids to help prevent harmful fat deposits
  • Promoting insulin, leptin, and adiponectin function for a healthy metabolism
  • Supporting healthy blood sugar levels already in the normal range
  • Promoting healthy insulin sensitivity
  • Promoting healthy gut microflora
  • Supporting healthy lipid metabolism
  • Stimulating the release of nitric oxide for healthy blood flow
Berberine Helps Ease Anxiety and Depression

Another benefit of AMPK is that it protects neurons and increases key neurotransmitters which improves brain function and psychological well-being.  So, it should not be surprising that several studies have shown that Berberine is very useful for anxiety and depression.

Berberine and Cancer Prevention

Berberine slows cancer growth and causes cancer cell death through a variety of mechanisms: tumor cell apoptosis and cell cycle arrest, inhibits blood vessel growth to tumors, inhibition of tumor cellular invasion and metastases (spread), etc.
One of the main anti-cancer targets that is inhibited by berberine is NF-kappa B. NF-kappa B is one of the most important proteins in our cells, acting as a key switch in the development and progression of inflammation and cancer.
·       Cancer (and precancerous cells) often have a permanently activated NF-kappa B, which keeps the cells proliferating and prevents them from dying (apoptosis.)
·       Chronic inflammation can also be a result of activated NF-kappa B, and we know that chronic inflammation can lead to cancer growth
·       Additionally, Berberine sensitizes cancer cells to the effects of radiation but NOT of normal cells. So Berberine may make radiation therapy more effective. 

Berberine also inhibits the tendency of cancer cells to become drug resistant over time by inhibiting the cellular membrane proteins that pump drugs out of the cell. When Berberine is taken with numerous chemotherapy drugs, studies have shown that they work synergistically to fight cancer.
Contraindications for Berberine

·       Displaces bilirubin and should not be administered to jaundiced neonates (may increase bilirubin levels due to displacement of bilirubin from albumin)
·       May cause a prolonged QT (a variable in cardiac electrical conduction) in patients with underlying heart disease
Drug Interactions

While Berberine is quite safe and well-tolerated, it may be contraindicated if you’re taking medications.  For example, Berberine may hinder absorption of tetracycline and other similar antibiotics, rendering them ineffective. Also, because Berberine significantly inhibits CYP3A enzymes — enzymes needed to metabolize most drugs — it can lower the clearance of medications, which in turn can augment their effect. This can lead to overdose, the risks of which will vary depending on the drug in question.

Berberine increases the effects of drugs that lower blood sugar so it is critical that you not mix Berberine with these drugs unless under the supervision of a physician.  IT is important to note that Berberine produces all the benefits of Metformin with much lower risks!

Sources of Berberine

Berberine is available as an isolated supplement OR through certain herbs such as goldenseal or Phellodendron.    Nexrutine is a patented Phellodendron Extract with high levels of Berberine that is particularly effective at reducing joint pain, improving mood, and reducing prostate inflammation and likely prostate cancer risk.   Phellodendron also has has a long history of being used to treat prostate inflammation and prostatitis.

“Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Starts Again Today! [Updated 2018-02-01 – Answer Image]

It’s the 15th of the month – and it is time for something that I want to start up again (and not only because I have over 50,000 Screenshots burning a hole in my pocket, but mostly that) – something that I had going for a short time, three long years ago…

The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

“Can You Guess Where The Screenshot Below Is From?”

(A Game Screenshot Identification Contest)

Having a ‘grand re-opening’ once again today – January 15th, 2018!

All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

1. Your guess for the game the image is from.
2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
That’s it!
**[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


Correct answers submitted by the end of the month (beginning at the time of this posting) will be chosen from randomly, where one Skillful Identifier will receive this month’s contest prize – which is: a gifted game from the Steam online store!

[Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

Can You Guess Where The Screenshot Below Is From – Contest #1
Can You Guess Where The Screenshot Below Is From – Contest #2
Can You Guess Where The Screenshot Below Is From – Contest #3

Are you ready? Here then, is the Screenshot image for this month, below:

[As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

Update!

A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the Screenshot for this month’s Contest)! Ready?

Here is the HINT image (with enlarged portion revealed), below:

[Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is a larger portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

Update!
It has been two weeks since the Contest began and there have been no correct submissions! Aww….

To end The Mystery, here is the answer for this month’s edition of
‘Can You Guess Where The Screenshot Below Is From’ (2018-01):


The Answer for this month’s Contest could have been: “Marvel Heroes” or “Marvel Heroes Omega” or “Marvel Heros” or “I can’t believe they cancelled this great game that I only just recently discovered existed especially with all the future Marvel movies coming out what happened this timeline sucks”. Click to see Full Size

Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Fifth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

See You In The Games!


(The Game Tips And More Blog Contest Game #2018-01)

Paperless Mission #9: Setting Up Your Class with Evernote

This is the ninth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #9: Set Up Your Class with Evernote

Today’s mission assumes that your class has easy access to technology. I teach in a 1:1 iPad setting, but I realize how blessed I am to have this and how few people — especially at the elementary level — get to do this. For those of you who have less access to classroom technology, I’m including modifications that you’ll be able to use at the end of the article.

It’s been a couple months since I started drinking the Evernote Kool-Aid, and I’m still loving it. I don’t have to worry about losing papers or information, and it has become my repository for just about everything. For the first time in my professional live, I feel like I’m getting a handle on organization. But then I see this:

And I’m reminded that just because I’m organized, doesn’t mean that my students are. In fact, all year long my fourth graders have been struggling with keeping track of class notes, transporting work between home and school, and remembering what materials to use to study for tests and quizzes. Part of that unquestionably comes with the age and maturity levels of 10-year-olds, but given how awesome technology has become, I knew there had to be a better way.

Enter student Evernote accounts. My students used Evernote on their iPads for the last 6 weeks of school, and I’ve been very pleased with the results. Here’s how we set it up.

Step #1: Register for new Evernote accounts.

This step can be done on either a computer or an iPad. (My pics will show the iPad view.) Students will need to have an email address in order to complete registration, but this can be tricky with students who are under the age of 13 since many of the students don’t have email yet. One work around that we found was to set up a class email address on Gmail (ex: [email protected]). Then, you can add the “+”symbol to the end of the username along with a string of letters and/or numbers before the “@gmail.com” ending. Evernote thinks all of these are different addresses, but Gmail doesn’t pay attention to anything after the “+” symbol, so everything will go back to the “fakeeberopolis” account. This lets students register without ever giving them an email address.

I had students put their lunch account numbers after the plus symbol, but names or other number combinations would work too. You just have to have the info after the “+” symbol be unique to each student so Evernote doesn’t think they’ve already registered. 

I let the students choose their own usernames and passwords, and I had them record those in a safe place so they could share them with parents. Next year, I’m likely to collect the information as well so I can easily help the students recover it. They don’t sign in and out of Evernote usually — they just stay logged in, so many of them forget.

Step #2: Build Notebooks for the Subject Areas

My students created notebooks for Reading, Writing, Word Study, Math, Science, and Social Studies. They later added notebooks for their Spanish and Music classes. During the set-up phase, we talked about the differences between notebooks and notes and how to move notes from one notebook to another. Next year, when I start this from the beginning of the year, we’ll also talk a lot about tagging notes to make them easier to find.
 

Why Student Evernote Notebooks Rock

1. More instructional time because transitions are so easy. Transitions between subjects used to take us forever because students would forget to grab a notebook or not have all the materials ready on time. Now transitions are just a quick stretch or brain break. They have all of their notes right in front of them already. We’re abandoning the cluttered bins and drawers.

2. Students are more accountable and prepared. We don’t have to worry about forgetting work at home or getting lost between home and school. It’s all in one place. In addition, students are able to create more comprehensive class notes. If we read an article using GoodReader, students can save it to their Evernote notebook. If we develop an anchor chart as a class, students can take a picture of it and add it to their notes to refer back to long after it’s gone from the classroom display. If they make a model of different types of triangles using toothpicks, they can photograph their work and add in captions later. More learning gets archived than we’d ever accomplish with a paper model.

3. Everything is portable between home and school. Students don’t get to take their iPads home, but as long as they save their work in Evernote, they can access it from any computer or mobile device. It also means that students aren’t leaving important readings or materials at school when they need to study for a test. I’ve had many frustrated parents complain that their child wasn’t bringing home the right materials to review for tests this year — especially because we don’t use traditional textbooks at my school — and this remedies all of that.

Another portability example is that I’ve also had students use Evernote as a word processor when they’re working on longer writing assignments because they can pick up their work between home and school. (In the future, I’d like to use Google Drive as their word processor, but until we get there as a school, this is an acceptable alternative.) Once students are ready to turn in a finished piece of writing, they copy and paste it into Pages, clean up the formatting, and turn it in through Edmodo. It has worked brilliantly this term, and I’m seeing much longer, more developed pieces of writing at all stages of the writing process now. I really think the ease of this process has played a role.

Now that we’re using Evernote regularly in the classroom, I can’t imagine ever going back. While I will miss the massive influx of office supplies (composition books, notebooks, etc) at the start of the next school year, I’m falling in love with the fact that the only things I take home with me each night are my laptop and iPad. Going paperless has been a glorious thing.

What are some ways you could use Evernote with your students? I’d love to hear about it in the comments section!

TestRun, Quick ‘End Of The World’ Edition Answers: Does SLI Really Make A Difference? and Where Should I Put PhysX for NVIDIA Videocards? (Text-Only Version)


Update: Added more Tests and Results – Hitman: Absolution Benchmark, Unigine: Valley Benchmark, Left 4 Dead 2 Unscripted Gameplay Test, Tribes: Ascend Gameplay Test and Rollercoaster Tycoon 3: Platinum Gameplay Test


Recently becoming the proud owner of another NVIDIA card, I swapped out my trusty AMD/ATi Radeon HD 6870 from ASUS that has served me so well and lovingly joined together two GTX 560 Ti videocards in electric matrimony to try out some SLI. I share now my experiences, the results of many tests and answers to questions I have seen in many places online, including one I had myself.

This is also a ‘Quick’ Edition, a version of the testing and results that are text-only for now, where I may do a full version as time permits in the future, with screen recordings, graphs and other materials that I would like to share and would help people out.

The Experiment

For this TestRun, with two NVIDIA videocards, I try answer the question: “Does SLI really make a difference?” and also “Where to put PhysX?”. Sure, the answer of ‘if it makes a difference’ is answered other places online, with pretty graphs and numbers; but I am one of those people that, although accepting, don’t ‘truly believe’ things unless I can test it out myself. This is a human stubbornness I know, but it also helps me explore many things I would not have otherwise experienced and allows me to share those results and experiences with others. “Does it really double performance?” is probably a more specific question of what I’m feeling, as of course it should make a difference, after all I am putting another 384 processing cores towards throwing around colorful shapes on my screen. I want to know if it even ‘doubles’ the awesomeness of games that I play. There are two cards in there now, so what’s the difference in performance?

Another aspect I plan to explore is regarding PhysX, NVIDIA’s lovechild of bouncing balls and splattering sparks. Does it affect game performance? Which card should run it if I have it on? Is it better to run it on a dedicated card [that only uses it for that] or off of the CPU? These are my own questions as well since finding a second NVIDIA gpu on sale… PhysX is only in a hamfisted-handful of games – and is only going to be found on NVIDIA GPUs, but it is supposed to improve visual/perceived quality in the games that do use it, due to the fancy waving flags, shattering glass and splattering blood [and the like]. I am going to test the options of having it on the first or second SLI card and how PHysX runs off of the CPU, too.

The Test

For this TestRun, I used utilities such as FurMark and FluidMark, Unigine’s Heaven Benchmark and a handful of games to benchmark and test with, such as Just Cause 2, Alien Vs. Predator, Lost Planet 2, Battlefield 3, Unreal Tournament 3 and Batman: Arkham City (all but the first two utilize PhysX). I am currently running an AMD 6-Core CPU and two GTX560Ti’s in SLI mode on a GIGABYTE 990FXA chipset mainboard.
I assume this is still an average-to-above-average system at the time of this writing (perhaps upper midrange but definitely not top-of-the-line) and it would help out anyone with a similar rig in the future as well with examples of some of the performance difference they will see [if they add a second videocard].

The Data

Here are my benchmarking test results and average framerates, comparing SLI mode with a single GPU:

FurMark: Score (2127), Average Framerate (40fps)
FurMark: Score (3959), Average Framerate (65fps) SLI
Lost Planet 2 – Benchmark B: Average Framerate (44fps)
Lost Planet 2 – Benchmark B: Average Framerate (103fps) SLI
Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (28fps)
Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (51fps) SLI
Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (44fps)
Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (90fps) SLI
Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (960), Average Framerate (38fps)
Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (1717), Average Framerate (68fps) SLI

Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1077), Average Framerate (26fps)
Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1741), Average Framerate (42fps) SLI
Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (32fps)
Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (33fps) SLI
(Hitman: Absolution does not appear to take advantage of SLI and/or is not Optimized for it, despite double-checking that SLI mode is enabled and trying to utilize NVIDIA’s ‘Custom Game Profile’ for it, as well – the following two games also do not appear to take advantage of SLI mode)

Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (51fps)
Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (53fps) SLI
Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (17fps)
Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (19fps) SLI




Here are some unscripted, raw gameplay framerates, averaged:
(multiple samples taken of each with FRAPS’ built-in benchmarking utility)

Alien Vs. Predator: Marine Storyline, Average Framerate (47fps)
Alien Vs. Predator: Marine Storyline, Average Framerate (89fps) SLI
Battlefield 3 : Multiplayer with 64 Players, Average Framerate (33fps)
Battlefield 3 : Multiplayer with 64 Players, Average Framerate (61fps) SLI

Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (128fps)
Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (185fps) SLI

*Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (36fps)
*Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (37fps) SLI
[*Game does not appear to be fully optimized currently, article with more detail here:
http://gametipsandmore.blogspot.ca/2012/11/planetside-2-and-ultra-settings-quality.html)


Here are the PhysX tests, done with FluidMark:

FluidMark: Score (5338) single-card mode, PhysX on the card, Average Framerate (87fps)
FluidMark: Score (5449) SLI, PhysX set to (GPU1), Average Framerate (89fps)
FluidMark: Score (7512) SLI, PhysX auto-selected (GPU2), Average Framerate (123fps)
FluidMark: Score (7379) SLI, PhysX set on (GPU2) Dedicated, Average Framerate (121fps)
FluidMark: Score (1291) SLI, PhysX set on (CPU), Average Framerate (21fps)

The Conclusion

So, does putting in a second videocard practically ‘double’ your gaming performance? Dang right it does. Now, I have read that it ‘should’ in many other articles online, but again, I had to test it out for myself. Almost across the board, in every game I threw at it, the performance was almost doubled. Wonderful stuff.

For those about to spend money on a second GPU for SLI because now they know it ‘will definitely make a difference’, I should mention as a Tip here that the more cards you add in (for 3-way or 4x SLI or Crossfire, for instance) the lower the rate-of-return you actually get on the investment.
In other words, adding a third card won’t ‘double the performance again‘ and adding a fourth card won’t ‘double that performance yet again’ –  it won’t even give you 300% and 400% performance [for the third and fourth videocards added]. You will actually see diminishing returns as you add more cards.
Still, if you have enough money for only a second GPU that matches your ‘old’ one, but not enough money to splurge on a new, faster one, clearly SLI/Crossfire is the way to go, it really does make a huge difference.

The PhysX tests are interesting, as they answer a question that I myself was wondering: does it matter whether you set PhysX on GPU1, GPU2 or the CPU, and should a GPU be dedicated to it?

It seems to make sense, that although a powerful, complex 6-core processor, my CPU is nowhere near the raw number-crunching [if ‘simpler’] streamlined data-geyser that the 384-core video card is. The difference can be clearly seen in the results. On the CPU, PhysX calculations [alone/isolated] gave a 23fps output of gushing blood on the screen, while even just one videocard running PhysX by itself put out 87fps of crimson data. Adding another card and telling that GPU instead [of utilizing the first card] to ‘calculate the physics if you please’ took the framerate up to over 120fps. Clearly, NVIDIA is showing that the videocards were made to handle the floating leaves, sparks and bouncing balls of PhysX …and ball handle they did.

What is interesting is the difference that was made, depending on which card you chose to handle PhysX. When the PhysX was set to GPU2 (the card not plugged directly into the monitor in my case), the highest score was achieved. When the PhysX was set to GPU1 (the card plugged directly into the monitor), it scored almost exactly the same as if there was no second card in the system at all. Now, the utility (FluidMark) does test ‘only‘ PhysX and there isn’t much to see on the screen other than some bouncing baubles, but it seems to show that if you put PhysX on the same card that you are using as your display card (that your monitor plugs into), then it might in fact affect performance of that card to display the pretty images on your screen slightly – or at least, to ‘deal with PhysX and show pretty colors on your screen’ at the same time.

Either way, they are both better than utilizing the CPU, as the pitiful performance when on the CPU (at least for ‘mainly PhysX only’ calculations) is over 500% slower than the performance seen when PhysX calculations are put on the second video card, and still calculated at over 400% slower compared to when PhysX is put on the first video card in an SLI setup. Clearly it is better to have PhysX calculations done on a GPU – and perhaps not put it on the main display card if you can.

Testing the ramification of this in actual gameplay, I played some Unreal Tournament 3 and Batman: Arkham City, while juggling the PhysX of both games to be calculated on the CPU, GPU2 and GPU1 (the main display card where the monitor is plugged in). Using FRAPS for collecting benchmark data in Average Frames Per Second, I saw no more than a few frames difference between all modes.
That is, playing with PhysX set to GPU2, PhysX set on GPU1 or putting the PhysX onto the CPU, I saw only a few frames of difference in actual gameplay performance. Mind you, it can be argued that I didn’t see as many sparks, blood, snow or leaves float across my screen at times; but overall, if you are concerned with only “the game performance ramifications” of where to put PhysX, The Answer Is: playing a game, it doesn’t really matter (but the CPU calculates PhysX slower than putting it on any card, as seen in the data).

Overall, if you can’t afford that fast, newly-released videocard you want, but you can afford to get another GPU of the same type as the one you have now – and your motherboard and powersupply can support it – it’s totally worth it to get a second videocard for SLI/Crossfire performance (and if you’re going the NVIDIA route, it doesn’t really matter where you put PhysX).

Have fun upgrading and See You In The Games If The World Doesn’t End Soon!

cool little trailer with a hinged top

https://www.instagram.com/bikergeardotstore/

WORKOUT ANYTIME on FOX 56 Lexington

WORKOUT ANYTIME on FOX 56 Lexington

Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
View the full segment here.

10 Must-Have Tools for the Busy Teacher

This year was uniquely challenging for me. I had my biggest class ever (28 students) , and I was co-teaching all day with teachers and paras from the special ed department–also a first. Meanwhile, I started working on my PhD, and my toddler constantly kept me busy. My plate has never been so full!

If you’re a teacher who often feels pulled in every direction, then this list is for you. These are my top 10 tools for juggling it all. Hopefully you’ll find some to use as well!

1. Nozbe

Nozbe is the ultimate task list manager. You can organize by projects — school, work, home, etc., create recurring tasks, and so much more. I can access it from any device, add attachments, and email stuff to my to-do list. I started out with the free version, and I quickly upgraded to the paid version. At $96/year, the paid version has a hefty price tag, but this app was SO much better than any other task manager I’d tried, and it’s been worth every penny. If you’re someone who has lots of projects going at once, this app is worth exploring.

2. Evernote

This is my brain online. All of my coursework and notes are in Evernote, and all of my anecdotal records and student work samples are in here as well. I was able to use the free version for many years, and then once my husband and I decided to go digital with all of our financial documents, etc., I upgraded to the premium version. At $35/year, it’s pretty affordable.

3. Dropbox

 I don’t think I could function without Dropbox. I switch between so many devices between work, home, and school each day, but Dropbox allows me to keep track of everything. All of my lesson plans, TpT purchases, readings for class, and more are in my Dropbox account. I’m still living off of the free space, but I’m getting the daily reminders that my Dropbox is nearly full. Might need to upgrade that soon, too. Premium accounts offer 100 GB of storage for $99/year.

4. GoodReader


 I’ve used this app a lot with my students, but I’m finding it to be totally clutch for my grad school stuff, too. I’m doing tons of research for my courses and scoping out dissertation ideas, and GoodReader allows me to annotate all of the PDF’s I’m amassing. I’ve created a folder on Dropbox for all of the articles I’ve gathered, and I can sync that folder to GoodReader so I can read it all on my iPad. I can also send it back to Evernote when I finish. One of my dear friends told me that I’d have laundry baskets full of research cluttering my house while I worked on my PhD, but not so…It’s all electronic!

5. GoogleCalendar

I have a variety of calendars on Google — class schedules, deadlines, school events, etc. Some of these I share with my husband so we can both be aware of each other’s events. Other calendars I share with my students and their parents so they can be aware of upcoming events and tests. I like that all of my calendars are color-coded so I know which calendar I’m looking at, and I can select/de-select different calendars to narrow my focus if I’m looking for something in particular.

6. YouCanBook.Me

This free site allows me to share portions of my calendar with parents so they can schedule parent-teacher conferences. I choose the days they can see, set the times they can schedule, and manage the maximum time blocks they can reserve. They don’t get to see any of the events on my calendar, just whether I’m available or not. If they reserve a time slot, it will automatically add it to my calendar and send me an email. It’s eliminated the back-and-forth process of conference scheduling and allowed me to manage my time better.

7. Planbook.com

Since I was co-teaching this year, I needed to find a way to share my plans easily from week to week. I tested out Planbook in August, and I loved it. I like that you can extend or bump lessons, attach files, and customize the fields that appear. It’s a great resource that’s keeping me much more organized. You can get a free trial of it before paying the $12 for an annual subscription.

8. Typinator

This is a tool that’s new to me, but Typinator is a text expander tool. There are several pieces of text that I find myself typing or copying/pasting over and over. Typinator allows me to create typing shortcuts for all of those. For example, if I want to type my blog address as a hyperlink when I comment on someone’s blog, I can simply type “~bl” and it will place the text there for me. I also use it for standard replies to emails such as when parents email me to say their child will be absent. I can type “~abs” and it will write: “Thanks for letting me know about the absence. I hope your child is feeling better soon! Today’s assignments will be posted on our class website, and let me know if there’s anything else you need.” Four key strokes = all of that. I find typing way faster than using the mouse, so this is a time saver that quickly adds up. It’s only available for Macs, and it’s priced in Euros (converts to around $36 US), but I use it all the time.

9. GoodReads


Distinct from GoodReader, GoodReads is an online community surrounding books. It allows me to keep track of the books I’m reading and which books I want to read next. As I’m starting my dissertation research, I’m constantly finding book titles that I want to check out. Similarly, there are lots of teaching books and children’s books that I want to investigate someday, and GoodReads helps me organize all of that. Best of all, I can use its scanning feature to scan barcodes when I’m browsing in the bookstore.

10. Edmodo

I used Edmodo a lot for collecting student work and grading tests/quizzes this year. It managed all of the submissions and kept the work organized for me so I could be more efficient with tracking these things. It also allowed me to create assignments, give and grade quizzes, communicate with students and parents, and so much more. This is a great free learning management system that was a centerpiece of my classroom this year.

With the exception of Typinator, which is only on my computers, all of these apps are cloud-based or mobile-friendly so I can get to them from any device. When I’m shifting between my iPhone, iPad, laptop, and desktop, that’s critical. I may be busy, but I can get to my projects anytime, anywhere, and I’m not hauling around tons of materials everywhere I go. These tools boost efficiency and minimize life clutter.

What are some tools you’re using this year to help with productivity? I’d love to hear more recommendations in the comments.

This post contained some affiliate links meaning that if you click on the link and purchase the app, a small part of your subscription cost will go to me instead of entirely to the company. I’m only recommending products that I highly use and pay for myself, however, and I hope you’ll find value in these resources as well. 

Beautiful Bed Room Design Sample

Beautiful Bed Room DesignBeautiful Bed Room Design

Beautiful Bed Room Design MinimalistBeautiful Bed Room Design Minimalist


Beautiful Bed Room Design ElegantBeautiful Bed Room Design Elegant


The hottest color of 2010 is Beautiful Bed Room Design which is a strong color that must be used as a complement with lighter tones so as to not overwhelm the space and to make it look classy and fun.In the pictures above you can see a beautiful turquoise interior starting with the chandelier and ending with pillows.It’s a good combination between turquoise and floral tapet from walls.

July Currently & Goals & a Meet Up!

Oh, July! You seemed so far away a month ago. How could you possibly be almost here already?! Can’t we add another month in between June and July? I really, REALLY want to hold on to June as long as possible. I’m really not ready to return to work in a few weeks…

Currently July

I’m linking up with Farley at Oh Boy! 4th Grade for the July Currently.

Listening: My little girl is almost 2, and she LOVES books. She also loves Pete the Cat. I took her to my favorite children’s book store, Little Shop of Stories, to get the new Pete the Cat book the day it came out. Given that she knows and loves the song “Wheels on the Bus,” it’s a great book for her to “read” on her own.

Loving: Planbook.com. I signed up for the one-month trial to tinker around with it, and it’s fantastic. I’ll definitely be using it next year.

Thinking: that I’m much more prepared to teach the Common Core this year — especially with math. I’m excited about implementing all of the things that I worked on this summer to get ready for math, and I’m optimistic about my year ahead.

Wanting: a longer summer break. There are so many things that I still want to do before going back to school, and I don’t think I’m going to be able to get them all done.

Needing: a maid. I can’t keep up with my husband, toddler, and two dogs. Once I go back to work, it may be time to hire someone to come in each week.

Tips, Tricks & Hints: One thing that helps me with time management is to try to group all of my like-projects together and work on them at once. For example, I have one day a week at school that I do all of my copying (or at least I did before going paperless!). I also spend one day working on plans for each subject (e.g., a day for math planning, a day for science, etc.) and a day for working on blog posts, etc for the week. This helps me use my time more efficiently and stay relatively organized.

July Goals

I’m also linking up with Jess at I {Heart} Recess for the first time for the monthly goals post.

Personal: I want to start exercising at least 3 times a week (baby steps). I return to work in a couple weeks (!), and I know with all that I’ll be juggling this year between work and my doctorate that I will need to do better with exercise for balance and stress management.

Family: I want to squeeze in a couple more “date days” before going back to school. My daughter is in school year round, so on “date days,” my husband leaves his office before lunch, and then we go out to lunch and catch a movie before picking her up. It saves us babysitting costs, and it’s a fun way to spend our afternoon.

Health: A few years ago when I lost a lot of weight, the biggest change I made was that I consistently drank 64 oz of water every day. Now that I’ve gained back the weight (and then some), I need to start drinking at least that much water every day.

School: I report to our staff retreat on July 17th, and then pre-planning officially starts on July 25th. I need to figure out how I’m going to decorate my room before then and map out some plans for the first few weeks before then.

Blog/TpT: I’m hoping to wrap up my Paperless Challenge series in the next few weeks, and I have several new TpT products in the works. This summer has just gone by too quickly for me to finish it all!

Outside the Box: I want to find some easy and tasty breakfast and lunch recipes that I can use throughout the year. I do a fairly good job cooking healthy dinners, but I am not consistent the rest of the day. I often forget to eat breakfast, and then I don’t make the best choices for lunch either. The more I plan ahead, the better prepared I’ll be. And this justifies spending more time on Pinterest. Win-win!

Southeastern Bloggers Meet Up!

Have you heard about the Southeastern-area blogger meet up? It’s about time that those of us in Georgia and the surrounding areas get together, and I’m super thankful that Stacia, Amanda, and Jivey from Collaboration Cuties and Ideas by Jivey have  organized something for us. If you are close to Atlanta, I hope you’ll join us for the meet up on July 20th. It promises to be lots of fun.

Click on any of the images below to connect with Jivey’s blog where you can RSVP.

I hope to meet lots of other fabulous teacher bloggers there! Click the button below to RSVP.

BEAUTIFUL INTERIORS STYLE FROM SHH

SHH is a London-based company, founded in 1992. Interior design is not their only strong point that the company also makes architectural projects. But now we want to show you how a room can be transformed into an elegant and modern in their vision.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

We collected up to 15 different interiors that stand out and can become a real source of inspiration. We deal in the living room, bedroom or the hallway of boredom and failed surprising elements are added to create comfortable spaces. White is airy and gives a sense of calm, while the funky food the best and rebels. Color and light is present in some unusual arrangements with excellent results.

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS STYLE FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

BEAUTIFUL INTERIORS DESIGN FROM SHH

Carbohydrates Benefits For Body Health

CARBOHYDRATES BENEFITS FOR BODY HEALTH

Carbohydrates Benefits For Body Health – Carbohydrates are one of a wide variety of organic compounds which are abundant in the earth. Understanding carbohydrates consist of carbon, oxygen, and hydrogen. The function of carbohydrates is very diverse and very useful for living things. The function of carbohydrates for mortal one as a fuel source.
For plants during the photosynthesis process can turn carbon dioxide into carbohydrates. The carbohydrate contains a carbonyl functional group and a hydroxyl group. The term of carbohydrates was originally used on a class of compounds which has the formula (CH 2 O)n.
Molecular form of the simplest carbohydrates consisting of a simple sugar molecules called monosaccharides. Many of carbohydrates which is a polymer composed of molecules and sugar molecules are strung into a long chain and the chain can forked branch, called polysaccharides. In addition to monosaccharides and polysaccharides, there are others that is a disaccharide (a series of two monosaccharides) and oligosaccharides (a series of several monosaccharide).
Carbohydrates Benefits For Body Health - 1
Monosaccharides
Monosaccharides are the simplest carbohydrates, this is because the molecule consisting of several atoms C alone and unable to be degraded by hydrolysis into other carbohydrates. Monosaccharides can be divided into aldoses and ketoses.
Disaccharides and Oligosaccharides
Disaccharide carbohydrate which is formed from two monosaccharide molecules that bind through the OH groups by releasing water molecules. Example: maltose, lactose, and sucrose. Oligosaccharide is a polymer degree of polymerization of 2 to 10 and generally is soluble in water. If the oligosaccharide consists of two molecules is called a disaccharide, and if it consists of three molecules called triose. Sucrose is composed of molecules of fructose and glucose, maltose consisting of two molecules of glucose, and lactose molecule consists of galactose and glucose. Polysaccharides are polymers of several monosaccharide molecules can for straight or branched chain and can be hydrolyzed with several specific enzyme that’s how it works.
Polysaccharides
Polysaccharides are carbohydrates formed from saccharides numerous as the monomer. The general formula of the polysaccharide that is C6 (H10O5) n. Example: starch, glycogen, and cellulose.
There are some functions of carbohydrate that is essential for living beings, among others:
1) The function of carbohydrates as the main energy source. Carbohydrates are an important energy source such as glucose is required and can not be replaced by other sources of energy.
2) It has an important role in metabolic processes, can maintain the balance between acid and alkaline body, helping as forming the structure of cells, tissues and various organs.
3) Carbohydrates play a role in the process of digestion.
4) Assist in the absorption of calcium.
5) Represents forming other compounds.
6) Carbohydrates are the constituent components of the genes contained in the nucleus of cells and is very important in the inheritance.
7) Assist in the process (defecate). This is because cellulose is a polysaccharide that is difficult to be digested, but its presence is very helpful to prevent constipation.
Carbohydrates can be found in many foods, here are a few sources of carbohydrates:

Carbohydrates Benefits For Body Health - 2


• Egg whites
• Potatoes
• Seed grain
• Corn
• Cassava
• Bread
• Pasta
• A variety of dairy products
• Fruit Fresh Fruits
Sweet potato
Nuts
Brown rice
• Sago
That article on the definition of carbohydrates, a source of carbohydrates and carbohydrate function. The presence of carbohydrates is important and needed by the human body. Definition of carbohydrates which is one of a wide variety of organic compounds which are abundant in the earth. Therefore, it is good not to overdo and shortcomings in meeting the needs of carbohydrates. The good step is to keep carbohydrate intake remains balanced.

Hopefully article Carbohydrates Benefits For Body Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

Franchisee Profile: Bill and Bob Aicklen

Franchisee Profile: Bill and Bob Aicklen

Bill Aicklen and his brother Bob, who is currently based in Texas, will be opening their fifth Workout Anytime gym in May. The brothers opened their first gym in Decatur in November 2009; bought the company’s flagship store in Dunwoody in 2012; purchased the brand’s first franchise location in Douglasville in 2013, and built their fourth store in Rome in June 2013. 

Bill, 63, received a Bachelor of Arts in philosophy from Old Dominion University in Virginia, and landed his first job in the banking industry working in the operations and financial systems department. From there, Bill moved on to spend the next 30 years of his career in the computer software business, performing various roles including post-sales, training and support. 

In 2006, Bill decided that he wanted to get out of corporate America and Bob, who was interested in investing in businesses, invited Bill to manage the operations. 

The first business that the brothers partnered in was an express oil change franchise. They built and operated two stores in Woodstock before selling in 2012 to focus their time and effort on Workout Anytime. 
How did you learn about Workout Anytime? 
We were looking for other business opportunities, and Bob came across Workout Anytime on the Internet. A business broker also presented the concept to us. 
Why did you choose an opportunity with Workout Anytime? 
From a franchise standpoint, it’s an easy business to get into; it’s simple. There’s not a lot of moving parts and you can staff the gym with just one or two people. Also, we both have strong customer service backgrounds and understand the importance of hiring the right people and providing excellent service. 
How has business been since joining the brand? 
We have between 1000-1700 active members at each location. Since we took over the Douglasville store and invested money into upgrading the equipment, we have turned it around. Our club in Rome is based in a small city with very little competition in terms of big name brands, and we have been very successful there. I expect Suwannee to also do well because it’s in a highly concentrated residential area. 
Are you involved in any charities or community outreach?
We localize our charity work depending on the club, and we usually donate free memberships for silent 
auctions. We also partner with Red Cross by allowing them to park their blood drive buses in our parking lots every quarter – the next drive will be in Douglasville at 3pm on May 12. We have also previously put buckets in our gyms for people to donate pet supplies for the Humane Society.

Workout Anytime Daily 10 Prehab Routine

Everyone knows that prevention is better than dealing with an injury, and part of injury prevention is spending time working on what are commonly referred to as “corrective exercises” or “Prehab”.   10 minutes a day spent doing 10 basic exercises can prevent many injuries, improve results from exercise, and dramatically improve movement.
Ideally do these exercises barefoot or in socks – your feet will be working very hard during these exercises and shoes reduce ground feel.  If possible do them in front of a mirror to see your form!
Hip Hinge – Hip Hinging is one of basic primal movement patterns, and it is also the movement pattern most frequently done incorrectly.   The best way to groove this movement pattern is practice it using a wooden handle or PVC Pipe held vertically against your back touching the back of your head, the top of your shoulders, and your tail bone.  By keeping contact with all three points as you hinge it teaches you to maintain a flat back which is essential for preventing low back injuries and developing proper movement mechanics that allow you to effectively load and unload the glutes and hamstrings.
It is also a phenomenal dynamic warm-up for the hamstrings!   Here is a video showing how to do it:  https://www.youtube.com/watch?v=PG67O49Hsso    Do 50 reps per day and you will see and feel positive changes in your posture, movement, strength and mobility!
Downhill Skier Exercise– This exercise contains elements of the squat and hip hinge.  Start by placing the hands palm down on the top of the thighs.  Keep the back straight slide the hands down until the palms are resting on the knees with the hips back like you are a second basemen.   You should begin to feel a stretch in the hamstrings.     Continue to hinge from the hip forward and slide down until your elbow are resting on the inside of the knees with back straight and hips back like you are a downhill skier.  This will require your knees to track forward over and maybe even slightly beyond your toes (this will generate a stretch in the calf muscles and specifically the single joint soleus muscle).    Keep your heels down the whole time – do not let them lift up off the floor!
Keeping the back totally straight extend the knees as far as possible – you should feel a strong stretch in the hamstrings.  Your hips will rise but keep your elbows on the knees and do not move the upper body!  Then drop the hips, flex the knees and let them move forward over toes as you drop back down to the downhill skier posture.
Start slow but as you get the hang of it you can move faster – as long as you maintain proper form.     Do 30 – 50 reps every day.   You will start to notice that your squat and your hip hinge movements all get easier along with improved mobility in the ankle knee and hip!   Click here for a great video of how to do this exercise properly:  https://youtu.be/nXKWtlr3rBQ
Goblet Squat – Squats are another primal movement pattern and goblet squats help emphasize the best form.   They should be done daily with a relatively light weight for a good 20 – 50 repetitions.    Keep the dumbbell, kettlebell or Sandbag held against the chest the entire time. If you have difficulty getting thighs parallel to the floor spread your feet farther apart, and also rotate out at the hips so that your feet are pointing outwards.   This can make a huge difference.   By doing this and holding a light weight against your chest you may find you can squat to a decent depth while maintaining an upright torso.  It should look like this:  http://cfitness.me.formecdn.com/2016/12/goblet-squat.jpg  
Alternatively you can hold a kettlebell/Dumbbell with both hands letting it go straight down between the legs as you squat down like this:  http://workoutlabs.com/wp-content/uploads/watermarked/Pile_Sumo_Dumbbell_Squat1.png
Single Leg RDL – Romanian Deadlift – is one of the most important corrective exercises you can do to help self-identify and correct muscle imbalances that are the most common cause of movement dysfunction and injury.
The best way to do this exercise is barefoot in front of a mirror where you can see your whole body throughout the entire sequence of the exercise.  Ideally you should be on a firm and level surface as well.
Start by facing the mirror standing on one foot with the other leg flexed so your thigh is parallel with the floor and knee flexed to 90 degrees with hands on your hips.  Look in the mirror and make sure your hips are perfectly level and if not fix that!   
Next, without moving the upper body extend the flexed leg down and hinge forward at the hip of the standing leg.   As your swing leg passes the other leg you should try to straighten it, and ideally you hinge forward at the upper body while keeping your swing leg and upper body in a straight line the whole time.
As you hinge try NOT to let your swing leg hip drop and keep your stance foot pointing directly forward with no angle.  The stance leg should flex slightly but the knee should NOT move forward – rather you should “sit” back into the hinge at the hip. Pause when you reach at or near parallel with the floor with your upper body and swing leg then smoothly return to standing and flex the swing leg.    Slower is harder AND better and do NOT use any load/weight.
10 repetitions on each side each day!   Do all 10 on each side one time per day and you will see some amazing changes in your strength, balance and athleticism! 
Here is a great single leg RDL tutorial:  https://www.youtube.com/watch?v=vc21IwnIcwk
Hip Thrusts – The hip thrust simultaneously develops the glutes while enhancing mobility in the hip flexors (both key because this counteracts the negative effects of sitting all the time!).  These can be done on the floor or with shoulders on a bench, bed or sofa to make it a bit harder.   You can do hip thrusts with two legs or one leg at a time to create additional load.   Here is a good shot of the exercise:  http://cdn-www.womenshealthsa.co.za/wp-content/uploads/2015/02/hip-thrust-hold.jpg
Important NOT to arch lower back at all and concentrate on squeezing glutes at top and NOT using low back.    Even without any load this exercise can produce great benefits – 20 – 50 reps each day!
Plank – The plank is a simple functional core exercise that produces great benefits.  It can be done on toes and hands (upper push-up position), Toes and Elbows, Hands and Knees, etc to adjust the difficulty.    Do a version of the plank that challenges for one minute per day while maintaining good form.   Here is a great article on some of the many variations:  http://www.health.com/health/gallery/0,,20813896,00.html/view-all
Side Plank – The Side Plank is also key to building core strength, but in the front plane (side to side stability and strength).   30 seconds to a minute on each side each day.   Like the plank there are many variations and one of the best when you are ready is a side plank with leg lift: https://rutheburke.files.wordpress.com/2015/05/side_bridge_abd.jpg
Static Lunge – Lunges are another primal movement pattern, and there are many different variety of lunges.  A static lunge is done with feet in a split stance like this:    https://www.google.com/imgres?imgrefurl=http://thefitnesslink.uk/exercises/static-lunge/&tbnid=J1sOV9EYH0PmVM:&docid=lgeVWz3ThLe7OM&h=1417&w=1890   
The exercise is fantastic for simultaneously developing strength and mobility in the foot, ankle, knee and hip.  Best done barefoot on a firm surface.  Keep your front heel down the entire time and rear foot is up on ball of the foot with rear knee, hip, back and head kept in alignment the entire time.    Do 10 reps at a time on each side per day – no weight is necessary. 
 
Side to Side Skater– This exercise develops hip mobility including providing an excellent dynamic stretch/warm-up for the adductor (inner thigh muscles).  Feet should be wide apart with feet facing forward – not angled out. Keep feet flat on the floor and flex forward at the hip keeping back straight (only flex forward as far as you can while maintaining a flat back and keeping both feet on the floor with entire foot kept down in contact with the ground).   Push the hips directly to the side and pause as you feel a stretch in the trailing leg’s adductors.  
Ideally your head and torso stay perpendicular to lower body and centered during the entire exercise just like a speed skater.  Then push your hips back in the other direction to the other to the other side.    NOTE:   Do NOT go up and down – your hips should go back and forth in a straight-line parallel with the floor.   Do 20 – 30 reps each day.
Ankle Circles – This exercise improves ankle mobility and is great before just about any activity.    Stand on one foot.    These can be done seated, standing or lying down – best done standing to simultaneously work on balance and stability.  The action is simple:  holding foot and leg in the air draw a circle with your toes for 10 circles in one direction and 10 circles in the other direction like this:  http://web.eccrsd.us/christy/public/athletic_training/ankle_sprain_rehab_beginner_files/Picture%201.jpg   
You will notice that one direction is much harder than the other and you will feel much less coordinated and same thing with one leg vs the other leg.  Do more repetitions in the direction that is challenging and more on the leg that is more challenging.  Ideally do the exercise while you stand on one foot while you pull your other leg up with knee bent so that your thigh is parallel with the floor.    This is more challenging than it looks but will provide big benefits in terms of balance and stability.

Done daily and before workouts these 10 exercises will provide big benefits including improved posture, stability, strength and mobility.   You will also notice that you improve at many other exercises and movements.

Men’s Body Click Diet part 4

Benign Prostatic Hypertrophy and Prostate Cancer

Benign prostatic hypertrophy is an enlargement of the prostate that’s called benign because it is not due to cancer cells. Still, the enlargement can be far from benign if it results in a lack of control over functions that we all take for granted, including urinating when you want to urinate and only then. A single urinary accident in front of your classmates in the first grade can constitute a major, unforgettable scar in one’s childhood; a repeat performance, like that of my sixty-year-old patient while standing in line at the check-in counter at O’Hare Airport, is no joke either. Nor is `benign’ the right word to describe the condition that underlies such loss of control. BPH may also involve getting up frequently at night to urinate, with the intense urgency to do so unfortunately combined with a disconcerting hesitancy of performance and a lack of reward in the volume of urine produced.

Although the symptoms of BPH can be severe, it is ironic that men with prostate cancer often have no symptoms. As they age, most men, on biopsy, show signs of prostate cancer. In fact, by the time they are in their eighties, nearly all men have prostate cancer, as defined by the typical cancerous appearance of cells under the microscope. Yet, because this particular cancer grows slowly and spreads infrequently, only a small percentage of men actually become sick or die from the disease. (A man’s lifetime risk of dying from prostate cancer is a little less than three per cent.)`’

Diet Start

Given the low odds of illness or death from prostate cancer, it’s confusing from a medical standpoint when a 60-, 70- or 80-year-old man has a prostate biopsy and is found to have cancer cells. Because the question of the actual malignancy of the condition — how likely it is that the cancer will grow quickly enough to cause problems — is difficult to resolve, it encourages a more aggressive approach to therapy than might otherwise be warranted. Since aggressive therapy frequently involves either removing testicles or taking female hormones, which can produce dramatic changes in a man’s body, this is not a trivial question.

Natural therapies for treating or, more important, preventing illness are not usually studied in the same way as pharmaceuticals, because no one can patent a naturally occurring substance like flaxseed powder and make enough money to justify the enormous expense of carefully conducted, controlled and double-blinded studies. Still, the studies show that consuming soy protein and other isoflavone and lignan-containing foods reduces the risk of prostate cancer. And the cancer data suggest strongly — and there is abundant anecdotal evidence to support it — that the same hormonal environment that leads to the high incidence of cancer in older men inour culture, but not in Chinese and Finnish men, is also associated with the risk for prostatic enlargement.5

The simple strategy for preventing the range and frequency of prostate problems is to consume more soy protein, flaxseed powder and rye fiber. If you happen to be a regular bacon, ham or sausage and eggs kind of guy, I urge you to substitute the shake, with its soy protein and flaxseed powder, at least four days a week. It’s good that you’re eating protein at your morning meal and getting the lift you need at the beginning of the day, but what you’re eating will not protect your health like soy protein and flaxseed. (If you don’t have time for breakfast, see the section for travelers in the appendix, where you’ll find a quick shortcut that will help you get your soy protein and flaxseed every day.

The Body Clock Diet and Heart Disease: It’s not Just the Cholesterol

Coronary heart disease (CHD) is the number one killer of both men and women in the United States. Each year, more than five hundred thousand Americans die of heart attacks caused by CHD. Soy intake has been shown to lower cholesterol and decrease cardiovascular disease associated with high cholesterol. There is growing scientific evidence to support this; for example, one recent study showed that a diet high in soy protein reduced cholesterol by as much as 20 per cent. 6 Other research has demonstrated that soy protein lowers triglycerides and reduces the oxidation of LDL or ‘bad’ cholesterol, which contributes to blood vessel problems linked to cardiovascular disease? And flaxseed has also been shown to lower both total and LDL cholestero1. The Body Clock Diet, which includes daily intake of soy protein and flaxseed powder, ensures that you get this important protection.

But cholesterol is not the exclusive evil agent in heart disease. Some people, especially those with complicating conditions of diabetes, tobacco smoking and a strong family history of heart disease and obesity, carry cholesterol-related risks. But most people who have heart attacks and other complications of ‘hardening of the arteries’ have fairly normal cholesterol levels.

The tide of medical thinking is changing when it comes to heart disease. It looks as if issues related to carbohydrate excess, insulin resistance and homocysteine and its control by folic acid will take center stage away from cholesterol. 9 The benefits of substances like flaxseed and soy are not due solely to lowering cholesterol. Soy and flaxseed do indeed lower serum cholesterol, but they also modify carbohydrate and fat metabolism, further decreasing your cardiovascular risk. You don’t have to be takingaim at your cholesterol to get benefits from soy, flaxseed and the Body Clock Diet.

Like many men, you may have a tendency not to think about your health, shrugging off warnings from your mother, spouse, doctor and children as well as newspapers and television programs that try to scare or educate you about activities that are dangerous to your well-being. Nor do you want to listen to me when I say that failure to adhere to basic circadian principles may eventually show up as something noticeably wrong with your health. But my advice is simple: there are some painless things you can do to reap what are potentially major rewards for your long-term health.

My Trip to Dhaka Bangladesh

I arrived in Dhaka, Bangladesh on the 24th of March for my next assignment on Financial Management Systems. The organization contracting me has some issues with its financial management system and has received recommendation from the auditors to fix these issues. Further they want to conform to the South Asian Federation of Accountants Standards. So my task is simple. Document the existing practices at the organization and get agreement on the current practices and then recommend changes and improvements to the system.

Well even though it is simple there can be quite a few things that can pose a challenge to this type of assignment. I already encountered one on the first day of my assignment (25th); which is, in a group of around 20 finance staff it was quite difficult to plot the current financial practices using flow chart symbols as non of them knew the current system in its entirety. It is still work in progress and I hope to have it pinned down during the next working day which is Saturday (Bangladesh uses the Islamic calendar); where the staff have agreed to come to work.

The last time I was in Bangladesh was way back in January of 2008; so it was good to come back to Bangladesh and to see how things are. I must say that the only thing that looked to have changed is in fact the increase in motor traffic. It takes for ever to commute on Dhaka roads. I am staying at the Ambrosia guest house in Dhanmondi where I stayed during my earlier visits to Dhaka. It felt good to be here where the staff recognize and remember you after a long absence; it really does feel like home when you are greeted by familiar faces.

Looking forward to the next few days of the assignment; it is scheduled to end in early April and then I have another assignment lined up in the Philippines.

My Trip to Batticaloa

This assignment required me to travel to Batticaloa which is in the eastern coast of Sri Lanka. The drive to Batticaloa is long (About 320 KM) but the killer is that it takes nearly 8 hours to get there. I left at 6.15 AM from Colombo and arrived at 2.15 PM in Batticaloa; stopping only for Breakfast and a cup of tea.

The assignment was 10 day evaluation of the management capacity of an organization who was delivering services to the people of the eastern province. The unique aspect of this assignment was that the client wanted to evaluate very specific aspects of its organization management structure, financial management, HR management, monitoring and communication systems. Therefore I had to customize the tools we used to a very high degree to ensure that the tools we used were compatible with the specific need. It also meant that this level of customization was a green field (Not done before so don’t know the pitfalls) this was further complicated by the fact that the execution of the assignment had to have a tri-linguistic person to facilitate the field work as well as translate at the synthesis workshop.

The assignment went in a smooth manner and it was well received by the employees of the organization. Generally management capacity evaluations can get tricky as some managers take it as a personal weakness and get very defensive.

I was surprised at the weather in Batticaloa and the amount of water on the ground. The roads that went through the lagoon were nearly inundated. Some of the shorter routs to Batticaloa were flooded so I had to travel via Polonnaruwa. In terms of the post war development in the east; I must say that all the reports regarding infrastructure development are correct and perhaps under reported. Road, bridge and utility projects are still going on and the whole of the eastern province looks like one giant construction site.

The fishing industry is booming in Batticaloa and the seafood prices are less than half of what it is in Colombo. So the team had seafood at every opportunity. The tourism industry has a demand but the number of rooms available seemed to be inadequate for the demand. There is a dire need for quality hotel rooms in Batticaloa. The availability of jobs would be the main social issue in the coming months as the construction industry starts to finish the construction projects.

I have to travel to Wadduwa (from Batticaloa) to attend the 6th South Asian Regional Workshop on Resource Mobilization which starts today; so will be on the road for the rest of the day.

Speedrun – Hitman: Blood Money – A Vintage Year (Silent Assassin, Pro Difficulty, Suit Only, Targets Only, “No Coins”)

Messing around trying another Speedrun, this time booting up some good’ol Hitman: Blood Money, “A Vintage Year” level.

Hitman is a wonderfully crafted, enjoyable game. In my opinion, every single installment in this series has been. People have enjoyed the ‘puzzle-play’ aspects of it, people have enjoyed the gunplay, the stealth. Players have also enjoyed trying to run as-fast-as-they-can through levels that were probably not designed with this intention. Now, Hitman: Blood Money may not win any awards for “realism” in some areas of gameplay, but I personally have something against the concept that an Assassin, wearing a nice suit, most likely a millionaire, is carrying around twenty dollars in pocket change. Heck, I am sometimes annoyed at the jingle in my own pocket of a couple of quarters when I come across them. Thus, my personal aim with this level: to do a Suit-Only, Targets-Only, Silent Assassin, ‘No Coins’ Speedrun (on Professional Difficulty). I am probably not the fastest at this sort of thing, I have only done a couple of intentional Speedruns in the past; but it was still fun to make and I figured it was ‘decently fast’, so I wanted to share. Enjoy!

Recorded game:  Hitman-Blood Money, First/Third Person Shooter/Stealth/Action
Recorded with:  Bandicam (Registered Version) @ 1080p
Recording codec:  MPEG-1 @ 80% Quality (Default Setting), 30fps

This was actually not as hard as I thought it would be – after finding out that Delgado.Sr is snipe-able up out on his balcony. It was his Son that gave me trouble (as it seems to do with everyone, after a few forum finds on the subject). I started just pushing him down the stairs and also setting up the Barrels to fall on him; but eventually I settled on just a good-old-fashioned-assassin-stand-by: the single bullet to the head. This felt ‘right’, after sniping dear-ol’Dad, anyway. Instead of pushing the Guards at the bottom into the water, I just walked non-chalantly by them, as they didn’t seem to care anyway.
[On the actual Playthrough, I seem to get some guards’ attention, but I assumed this was for going into the areas I wasn’t supposed to, not for being witnessed killing anyone]

I also wanted to do things like ‘leave nothing behind’, such as ‘just dropping weapons’ (like the Sniper Rifle) to save time. This sort of stems from the multitude-of-coins thing… Don’t get me wrong by the way, I appreciate the time so many have taken to figure out their own ways to complete Hitman levels by using distractions. I just for some reason [OCD?lol] find it hard to extend my fantasy thinking within the game ‘that far’ – to where a so-called Silent-Assassin-slash-Hitman is always carrying around and actually utilizes enough laundry money to make the homeless cry on every mission. [I didn’t actually mean to rant here, hah] I just think if an assassin wanted to throw anything around to distract guards, it could more realistically at least be a found weapon of some sort, as opposed to a ton of coinage everywhere (pebbles could even make more sense).

At any rate, whether you use coins (a mechanic that is indeed offered directly within the game) or you don’t, there you have it; not the fastest run [or the most ‘Silent’ lol], but hopefully an enjoyable little watch, nonetheless.

See you in the games!

The Sims 2 “Ultimate Collection” (Absolutely Everything) – Completely Free from EA

When I first read about this from EA, that is, the possibility of getting absolutely every single expansion and “Stuff” add-ons completely free, I thought there must be some mistake… A little bit of reading at the EA website and I inferred from the phrasing that it was initially going to be offered as a free upgrade to current owners of The Sims 2 (Digital/Download or Disc-based versions); but I did a little more reading about it today and it seems that EA may be ‘planning on putting it “in everyone’s game list” eventually’… [in my opinion] most likely to arouse just-a-little-more interest in The Sims franchise for the upcoming “The Sims 4” release (now available for pre-order, slated to be released in September 2014).

Therefore, now feeling fully-okay-mostly safe from the dark shadows of ‘releasing something that wasn’t meant to be distributed’, I share with you the Product Code that will allow you to be the proud owner of “The Sims 2 Ultimate Collection”, which includes all of the below:

  • The Sims 2
  • The Sims 2: University Expansion
  • The Sims 2: Nightlife Expansion
  • The Sims 2: Open for Business Expansion
  • The Sims 2: Pets Expansion
  • The Sims 2: Seasons Expansion
  • The Sims 2: Bon Voyage Expansion
  • The Sims 2: FreeTime Expansion
  • The Sims 2: Apartment Life Expansion
  • The Sims 2: Family Fun Stuff
  • The Sims 2: Glamour Life Stuff
  • The Sims 2: Happy Holiday Stuff
  • The Sims 2: Celebration! Stuff
  • The Sims 2: H&M Fashion Stuff
  • The Sims 2: Teen Style Stuff
  • The Sims 2: Kitchen & Bath Interior Design Stuff
  • The Sims 2: IKEA Home Stuff
  • The Sims 2: Mansion & Garden Stuff

Wow, thanks EA!

Note: this package release may be time-limited and EA has stated that they will no longer be updating The Sims 2 or it’s expansions, although they can still be contacted if you are having technical problems running the game

Here are the steps to redeem the free Activation/Product Code:

  1. If you don’t already have it installed on your system, download and install the Origin game client from EA [it is similar to Steam and other game management interfaces] from http://origin.com/download
  2. Create an Origin account if you don’t already have one at https://connect.origin.com/create and log into the Origin client
  3. In the pull-down menus at the top of the Origin interface, click on “Origin” and then “Redeem Product Code…”
  4. In the white box [field] under Product Code, enter this:
    I-LOVE-THE-SIMS
    [hyphens may not be needed]
  5. You should then see a message that the activation was successful and you are the newest owner of  [oops, I forgot what year I’m in, I mean a temporally licensed user of]  The Sims 2, along with all possible Expansion Packs and Add-Ons
  6. Select the game in your My Games list in the Origin Client and install it by clicking the Download button that pops up [and if you’re like me, click OK to the Insufficient Disk Space message]
  7. That’s it! 

Enjoy playing The Sims 2 once again, experiencing all that this version could possibly offer.

Have fun with it and See You In The Games!

My trip to Hanoi, Vietnam

I returned to Vietnam to facilitate a 2 day planning workshop for the 6 organizations that I did the capacity assessments in January. It felt good to meet everyone and catch up. The workshop went smoothly and I had very positive feedback from the participants.

I was happy to see people genuinely interested and participating / contributing towards the workshop. This ensured a high quality of the results and the buy in by the participating organizations. I put the success of the workshop down to the following:

  1. The CEO / Executive director (ultimate boss) of the organization participated
  2. They had read the organization capacity assessment report and were familiar with the contents.
  3. They were guaranteed of a tangible workable plan at the end of 2 days.
  4. Being open and willing to learn

There is a chance that I may be requested to do some more work for them in the near future; however it seems that this is the end of this phase and the client is happy with the results.


The view from the roof top restaurant near Hoan Kiem Lake.

I stayed at the Trang An hotel; It’s in the center of Hanoi, near Hoan Kiem Lake, so quite convinient for walking around, shopping, finding nice restaurant, etc… Had a good time too.

Immune Complex Food Sensitivity

These occur when antibodies attack allergens but don’t manage to kill them. The result is an allergen (called an antigen) with an antibody stuck to it. This creates a whole new animal (an antigen-antibody complex) that the body doesn’t recognize. When this happens, the ‘new animal’ starts circulating around the body, and this circulatory immune complex, or CIC, can eventually lodge in tissue.

CICs create many of the same reactions as classic allergies. When they circulate through or lodge in tissues, such as those of the kidneys, lungs, liver, or joints, they can cause terrible problems by starting immune and inflammatory responses. They can cause joint problems similar to arthritis, and they can cause organs to malfunction. They often interfere with the body’s filtering mechanisms, such as the lymphatic system and kidneys. Some researchers believe they contribute to many types of kidney disease, some of which are eventually fatal.

Diet Start

Sometimes, people with serious CIC problems experience widespread conditions — such as migraines, kidney problems, and joint pain — and never realize that all of these problems have a single cause.

Frequently, patients come to me hoping only to lose weight, but when they resolve problems such as excessive CIC production, they also overcome other serious health conditions. One recent patient, for example, not only lost 22 pounds but also recovered from chronic joint pain, migraines, and gallbladder inflammation. This patient was happy to lose her weight, but was overjoyed to solve the other problems. Of course she had to make a serious commitment to her health and change her lifestyle. But she enjoyed the whole process, because she felt so much better every step of the way.

This reinforced my belief in the adage, ‘If you just strive for thin, you’ll never win. Strive for health, and thin will follow.’

Now you know about the risk factors that make you vulnerable to food reactions, and you know how food reactions work. Good for you! You now have more knowledge about this subject than many doctors do.

Now that you have a good foundation of knowledge, you’ll be able to understand why food reactions cause bloating and swelling. Once you understand this, you need never again be a victim of false fat.

Hitman: Absolution – First Impressions and Screenshots

I finally picked up the latest iteration of the Hitman Series, Hitman: Absolution, starring Agent 47 as the main anti-hero, id est killing the bad guys but never quite [arguably] becoming one of them. Differing from the last couple of Hitman publications, Absolution has an overarching story, connections being made in a chronological manner throughout the various stages and settings. Characters are introduced and developed via cutscenes, as the plot is pushed further by your completing the next mission for a feeling of engagement in the storyline.

I personally liked this approach, as opposed to the last couple of Hitman games, which seemed like mostly ‘replays’ of old missions from previous games (which in and of itself, isn’t a bad thing). While there were similar settings, such as a Chinese Market Square, they were sufficiently changed enough – especially with the graphical improvements and new gameplay interface – to seem varied enough to be enjoyable. There were even updated versions of [personal] ‘old favorites’ that I waited excitedly for (such as a ‘Hotel’ stage). Slightly more varied than the old versions, if you include the new “Instinct” game mechanic, these levels felt ‘fresh’, even if they weren’t new.

The “Instinct” game mechanic seems like an effort to simplify the game, making it easier for newcomers and those who had trouble with the complexity and scope of the previous Hitman games. Indeed, I remember reading a lot over the years of people saying the Hitman games were “too big” or “too complex” and that it didn’t help the player much at all, as far as where to go and what to do. It “plopped you down in a large area with just a map”, they felt. Of course, that was the draw for all of the other people, the complexity and seeming openness of the game was enjoyed, where you had to figure out everything yourself. You could decide what to skip and what to do and could decide for yourself how to do it. The new “Instinct” mechanic of Absolution doesn’t take too much away from this (you can turn it ‘off’ if desired) and it actually adds to the cinematic feel of the game by taking the ‘player out of playing’, so to speak, which results in more of a feeling that you are ‘playing Agent 47’, guiding him (and using his innate abilities) through the game, as opposed to ‘actually being Agent 47’ and figuring everything out yourself heavy-handedly. I suspect this more objective approach has already been a point of contention since the game was released.

An example of Hitman: Absolution’s new ‘Hitman Instinct’ game mechanic, showing how Agent47 can ‘sense’ enemies in and around the nearby area and estimates where they may be heading.

When utilizing Agent 47’s ‘Instinct’, the game shows where 47 ‘senses’ there are enemies and where they are and shows you on the screen with outlined shapes. It even shows where 47 ‘calculates’ enemies will be moving to, showing you their intended path with a line of flame and where they will stand still with a larger lick of fire. This is where the adrenalin-dipped decision making and primal ‘danger’ awareness kicks in during the game, as a player can choose to set up an engagement with an enemy, or stealthily avoid these paths and points.

For those who do not like or want the new game mechanic at all, it can be turned off, mainly by choosing a higher difficulty level. There are five to choose from and higher difficulties result in more ‘sensitive’ or ‘aware’ enemies, tougher enemies (wearing more body armor one assumes) and more of them. For those who are new to the game or having trouble with it, the difficulty can be lowered as well, with less enemies, enemies with less skill (not as good at aiming) and less awareness (having a bit more ‘tunnel-vision’) allowing you to sneak around them easier. The option to have this game mechanic off or on, at the players choice, is nice and was no doubt included to appease those who would not like it’s hints and guidance. New players (those talking about the games’ difficulty in the past) can have it on and still enjoy the action and storyline as well. It feels like an ‘attempt to please everybody’ – and I assume it will work well in that regard. (I haven’t read any Reviews of the game (to avoid exposure to the material within) before I purchased it, but I assume that once I indulge in others’ opinions, I will see much disagreement on that last sentence).

View of a hotel cleaning supply room from an air ventilation shaft. Click to see Full Size

The game itself felt atmospheric and cinematic. The music changed as action waxed and waned. Enemies ignored or chased you around winding levels that you had to discover and remember. The graphics were spectacular, with detailed textures, dark and gritty lighting and shading. The core Hitman gameplay was there – even if it wasn’t there for very long. This game felt very short to me. Perhaps it was the somewhat simple Television Movie Special plot, perhaps it was the number of missions (although they were split up into sections). Perhaps it was merely enjoying it so much that I wanted more, but just during the course of writing this article off and on, I have completed the game in it’s storyline entirety (not counting Challenges and Item Collection) in just over 20 hours. That doesn’t seem very long, but I suppose it is to be expected in a game that is more like “Max Payne” and less like “Skyrim” (more Action and less RPG). You could keep playing after finishing the main story, select past levels and retry them, doing them ‘cleaner’ for a better score or achievement, or look around and discover new weapons and pathways, or just redo any level you wanted to for fun.

An example of how the levels are split up into sections and how you can select past levels to replay them.
An example of the updated game engine, with higher-detailed character models, textures and environments.
Click to see Full Size

Other than the copy-pasted ‘general population’ mannequin-people utilized in larger crowds (used understandably to keep memory/resource usage of the game down of course – all of the ‘main’ NPCs have good detail to them), I personally liked the attention  paid to smaller details, such as the amount of debris scattered around the levels – things like cups, papers and garbage, all part of the gritty ‘lived-in-ness’ of the environment, adding to the realism. It’s nice to see games that pay more attention to the surroundings/settings these days, as opposed to the stark, clean-floor environments in games of yesteryear.

Overall, Hitman: Absolution was very enjoyable. It was great fun to figure out steps and schemes for the various areas and carry them out with cold calculation. I laughed out loud a few times and grit my teeth in anger at the more difficult parts, playing them over and over again, trying to figure out new ways to accomplish the objectives and complete the contracts. Despite feeling shorter (perhaps just because it was so enjoyable) and despite some changes that others might not entirely like, I still suggest trying it (especially if you are a fan of the previous games in the Hitman series). I personally had a lot of fun with the game – and isn’t that the most important thing?

Have fun with Absolution and See You In The Games!

SWIMMING POOL DESIGN IDEAS GERRR……

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

Here are some tips on how to keep your energy bill is lower and save valuable resources of the Earth at the same time.

* Heating your swimming pool: Depending on where you live and heat that is during the spring months and summer, you may not need to heat your pool as often as you think. The houses are in hot desert climates and do not need to heat the pool at night or when he decided to entertain. By heating the water, taking into account alternative methods of heating used to heat water. Energy from solar panels on your home is an excellent way to harness the sun’s energy to heat your pool.

* Cleaning the Pool: Many use automated equipment, which operate in the pool when the pool is empty. While helping to keep the pool clean when you’re in, but also the use of electricity 24 hours a day. Try to reduce the frequency to an automatic cleaning to be used. Also choose to use less chlorine, and to consider alternatives such as cleaners, detergents, ozone. Keep the cover over the pool when not in use also helps keep the debris in the air cleaner, leaves and twigs.

* Keep all plastic and vinyl toys away from the game: Even if I do not believe that the maintenance of the environment around the pool with pool toys the child is also important. Many pool toys are made of vinyl or PVC, also known as polyvinyl chloride. These types of toys, release toxins and chemicals hazardous off-gas. Try to select the pool toys that are made from natural organic materials and the safety of your children, and help keep the pool a greener place to play in.

* Use other sources of water in your pool: In your geographic area, using other methods to collect water in your home into account. Options could include rainwater that can be used to fill your pool, and the plumbing in your home for showers, baths, basin and toilet. This measure can help you reduce your water bill and conserve water on Earth. For many municipalities, geographic, you can earn additional benefits by LEED, or the benefits of saving tax on income tax time. Greywater reuse for your home is a viable option for many homeowners.

Owning a pool should be an enjoyable experience, after all, you deserve to relax and entertain in the warmer months of the year. Despite owning a pool should not be at the expense of its portfolio, the precious resources of the Earth or the health of your family. Follow these tips to green the pool and enjoy all the benefits of reading and resting in the sun.

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

See You In The Games!

Health Concern: FAT?

The term “fat” includes fats from meat, fish, poultry, and dairy products as well as vegetable oils and the nuts, seeds, and grains from which they have been extracted. There are two basic kinds of fats—saturated, occurring mostly in animal foods (although some vegetable fats such as the kind that coconut contains fall into this category too), and unsaturated, in the form of vegetable oils such as safflower, corn, and sunflower, and in seeds and nuts. Fish tends to contain more unsaturated than saturated fats, meat more saturated than unsaturated.

Whether saturated or unsaturated, all the fats you eat rapidly form a film around blood cells and platelets, creating a kind of sludge which causes them to stick together. This clumping significantly interferes with circulation by clogging blood vessels and even temporarily closing down small capillaries. As a result, your cells do not receive all the oxygen and nutrients they need to function efficiently. They only run at about 80 percent capacity. This interferes with cell metabolism as well as with the efficient elimination of cellular and tissue wastes.

Diet Start

The chemical structure of an unsaturated fatty acid differs from its saturated brother in that at least two of the carbon atoms in its formula are free. This means that they have no hydrogen atoms attached to them, as the molecule of a saturated fatty acid does. It was long thought that while saturated fats were bad for you, unsaturated fats were good. For unsaturated fats have been shown to reduce cholesterol levels in the blood, and therefore were believed to be helpful in preventing arteriosclerosis and coronary heart disease. That is the reason we have been encouraged in the last thirty years or so to include plenty of polyunsaturates in our diet by switching from butter to margarine and vegetable oils. The catch is that although unsaturates do this, like all fats they still raise triglyceride levels (another factor linked with coronary heart disease) and they also create the same clumping as the saturated fats do, which leads to tissue anoxia.

Women have also lately been encouraged by poorly informed writers to include lots of polyunsaturates in their diet for their beauty’s sake. Unsaturated fatty acids are an important constituent of skin and muscle tissue and so it was thought, quite wrongly, that we need more of them. For what we have not been told is that the chemical structure of unsaturated fats with their free carbon atoms makes them extremely unstable compounds, and that when an unsaturated fat is exposed even to the smallest trace of a catalytic agent it begins a process of autooxidation which results in the fat molecule’s breaking down to produce what are known as free radicals.

Free radicals are highly reactive particles which, if left unchecked in the presence of oxygen molecules, will form toxic peroxides. These peroxides can damage and destroy cells. They have also been implicated as a primary cause of the aging process itself. When a cell, or the genetic material of a cell, is destroyed by free radicals, the result is something known as a lipofuscin pigment granule—often referred to by biochemists as a “clinker.” With age, ever more cells are damaged or destroyed as tissue degenerates, leading to increase in the number of these pigment granules. This is something you want to avoid in every way you can if you don’t want to look and be old before your time.

To some extent, the presence of sufficient amounts of an antioxidant such as vitamin E in the system may prevent this from happening, because it minimizes the damage done by free radical chain reactions by breaking the chain. Vitamin E, like other antioxidants, helps block the oxidation that turns fatty acids into harmful peroxides. The more unsaturated fatty acids in your diet, the greater will be your need for the vitamin.

An interesting dietary survey that was done at the University of California at Irvine looked at over 1,000 patients and examined the degree of wrinkling and crow’s-feet, frown lines, and other indications of skin degeneration such as damage to the collagen and elastin fibers and the irregular pigmentation characteristic of old skin. The subjects ranged in age from seventeen to eighty-one and 76 percent of them were women. Cadvan Griffiths, M.D., the professor of surgery who carried out the study, discovered that there is an undeniable link between marked clinical signs of aging and the intake of unsaturated fats in one’s diet. Those who regularly and frequently included polyunsaturated fats and oils in their diet had marked signs of premature aging. Some looked as much as twenty years older than they were. Very few of those who had made no special effort to eat more polyunsaturates showed any clinical signs of premature aging. Evidence is also accumulating that links free radical reactions to the etiology of cancer, senility, atherosclerosis and hypertension—all of them disorders generally associated with aging. This is all the more reason to limit the amount of every kind of fat you eat to no more than you actually need.

It’s Not Just You™: AMD’s Crimson Drivers, Radeon ReLive Not Working At First [Possible Fix]

Just a quick post before I go to bed here, that I wanted to share about the AMD Crimson Drivers that I got notified about just a bit ago, which included AMD’s “ReLive”, their new Game [and Desktop] Recording utility – ‘built-in’ to their 16.12 Drivers… For those who couldn’t get it working right away (I see posts about it already in the Official AMD Forums), I couldn’t either… And although I eventually did, I wanted to let others know, if you are having issues with it: It’s Not Just You™

I was already starting to get tired when I saw a notification of the Driver Update – and I had no idea there was a nifty Game Recording ‘app’ incoming with it [I haven’t been reading much lately, I have another Cold for pete’s sake!]. For AMD GPU owners, waiting patiently to see if AMD was going to come out with their own Game Recording utility – it’s here! The future is now!

Check out AMD’s Video on their ReLive edition of Radeon here: 
https://www.youtube.com/watch?v=nRSm12lwRe4

[I really wanted to start Testing it all out tonight, running Benchmarks and collecting Data for a TestRun or a Quality Test with it; but my sleepyness is actually building and getting the better of me, so I better go soon – I wanted to share what I did this evening though, to get it working (for me), before I go…]


Without going over the few things I tried first that didn’t work (setting configuration, testing with different games, etc), here’s the steps to take that finally got it running, for me:

  • Download the Latest AMD Drivers via their main Website (http://support.amd.com/)
  • Uninstall the main AMD Drivers via the Control Panel > Programs > Uninstall/Change Program
  • Reboot
  • Install AMD Drivers via the Download from their Website
  • Reboot

That’s it!

After that, even though I have a 200 Series* AMD GPU at the time of this writing**, I was able to get ReLive up and running, even playing a little bit with the configuration and making a couple of short test recordings, before I came here to write this quick ‘tip’ of what might help get it going for others… It’s a larger ‘step’ (messing with Drivers, as opposed to just messing with Configuration/Settings); but I always like to Troubleshoot from the smallest steps first (eg. changing some settings) to larger steps (eg. re-installing software) to huge steps (eg. OS reinstallation, hardware changes). Thankfully, it started working just fine after only a bit of a ‘larger step’ taken.


Although with the most recent versions of Windows you don’t always have to Reboot it when making changes, it helps to get everything ‘in order’ in the background, re-initializing all hardware and Drivers fully – which is why many installers/software still get you to do it through their installation programs.

I plan on putting the Game Recorder through it’s paces, working on a TestRun and a QualityTest, to come in the future here at The Blog – for now though, hopefully ReLive can get up and working for you, too – good luck, and if you are having troubles with it, remember – It’s Not Just You™!

* The AMD page on ReLive at their main website (http://www.amd.com/en-us/innovations/software-technologies/radeon-software/gaming/radeon-relive) shows only 400 Series GPUs as ‘Officially Compatible’. Although it does not state ‘it will not work with earlier Series’, it is unknown 100% at this time if it is possible, hence my mentioning it above

** Disclaimer and Personal Veracity Statement: Although I currently own an AMD GPU, I have owned NVIDIA GPUs in the past and will do so in the future. I have no personal preference between the two, purchasing one or the other as Upgrades depending on my needs at the time and my financial limitations at the time I choose to Upgrade. I have not and will not receive any compensation for mentioning or talking about either companies’ products. I am merely an enthusiastic user (of both).

Do you have Food Cravings? Food Cravings Test

  • Do you frequently eat until your stomach is uncomfortably full?
  • When you get hungry, does it make you feel tense, weak, or irritable?
  • When you get hungry, do you sometimes focus on one or two specific foods?
  • Do you snack often, usually eating the same snacks?
  • Have you ever had other addictive habits, such as smoking or drinking too much alcohol or overconsuming caffeine?
  • Diet Start
  • Are you often hungry after a meal and stay that way until you’ve eaten one of your favourite foods?
  • Do you usually need dessert after dinner to feel satisfied?
  • Do you tend to eat a relatively narrow range of foods?
  • When you eat your favourite foods, do you often intend to eat only a moderate amount, but end up eating a larger amount?
  • Do you sometimes feel as if you lack control over what you eat?
  • If you snack on foods other than your favourite foods, do you tend to feel unsatisfied?
  • Do you binge on food more than once per week?
  • Even if you know a food doesn’t agree with you, do you eat it anyway?
  • When you eat your favourite foods, do you frequently drift into an almost trancelike state of relaxation?
  • When you eat one of your favourite foods, does it generally improve your mood?

If you answered yes to six or more questions, you are probably overweight. If you’re not, you must have a tremendous degree of willpower or an exceptional metabolism.

When this happens, you will stop eating as much as you now eat, and your metabolism will heal. You will then begin to lose adipose tissue gradually, painlessly — and permanently.

Georgia Bloggers Meet-up

I was thrilled to get the opportunity to meet up with some other Georgia bloggers yesterday thanks to the organizational efforts of Jayne at Smart Kids. You see, even though I’ve been MIA from the blogging world a lot this year, blogging is always on my mind. Really.

This year has been a whirlwind as I’ve juggled teaching full-time, parenting, and starting my PhD program. Virtually everything I’ve written this year has included a bibliography, and that hasn’t left a lot of energy for my blog. But when I’ve been researching and writing for my academic pursuits, I’ve been learning all about theories of professional learning and how our online encounters fit into that. I must say, there hasn’t been a lot written about teacher professional learning through blogging, and that’s a gap I intend to fill. More people need to know about the amazing teachers supporting each other through social media. They need to know how that process is 10 times better than any other form of professional development and how it empowers teachers to become better at their craft by pursuing their passions and interests.

So when I say that blogging is always on my mind, I really mean it. It’s been at the heart of every paper I’ve written as I work on my PhD. When I got the chance to go meet some fellow bloggers, I couldn’t say no.

The meet up was at Georgia School Supply in Macon, GA–about an hour and a half away from where I live. I was excited to go and meet some fellow bloggy friends because it’s always so good to be able to match names and faces and to remember that there are some real live people with amazing ideas that are working in classrooms, too. I’d never met any of the people there, so it was a real treat.

We talked about our secret lives as bloggers and TpT’ers, shared tips and strategies, made business plans, swapped products, and had an all around great time. I love meeting other bloggers and learning how much we have in common. Everyone I met yesterday was wonderful, and I look forward to keeping in touch with these new friends!

I hope to be blogging more this week as my student teacher takes over EVERYTHING from now through spring break (woot! woot!). In the meantime, be sure to check out the blogs from the amazing people I met yesterday!

Jayne, Kelly, Angie, Stacy, Tara, Valerie

PhotobucketThe Teacher Wife

Funky Fresh Firsties

...And They All Fall Down...

Georgia Grown Kiddo's

Jennifer, Carol, Kathy, Meghan, Kim, Irma, Megan


 
 

Michelin, Jessica, Greg, Erin, Alison

 

Quality Test – MSI Afterburner’s MJPEG Implementation (Part I) with Hitman: Absolution (Ultra Settings, 1080p)

Update: Added screenshot example of the RTV1 codec ‘color banding’ issue, with circled areas¹**
Update: Added Quality Test Comparison (Four 1080p samples of Hitman:Absolution) at different Quality Settings²**

Recording with the MJPEG (Motion JPEG) codec, every frame is an independent ‘Keyframe ‘or ‘I-Frame’ (short for “Information Frame”), which means it is a type of frame that can be ‘cut’ or started from in video editing programs (technically, every frame is a JPG picture!). This also allows for faster seeking and rendering in editing applications. MJPEG also requires less overhead (better performance/less ‘lag’ while recording) than many codecs. As well, the audio captured is PCM (“Uncompressed”) with MSI’s Afterburner, which means that any video editor should be able to recognize the sound data. Errors in programs like Virtualdub saying “Error initializing audio stream decompression” or Sony’s Vegas showing “Stream attributes could not be determined” will not occur and these will open the audio without associated problems.

Testing out MSI’s Afterburner as a game recorder and using the built-in MJPEG codec that comes with the program, I fired up some Hitman: Absolution, turned up everything to Ultra, captured some clips and put them together, uploaded it to YouTube, and collected some results with everyone:

This video compilation is a test of a few things:
1) Hitman: Absolution’s performance while maxed out (Ultra Settings in game Options)
2) Capture quality of MSI Afterburner and performance/lag of using it
3) H.264/AVC compression quality maintainability
4) Youtube’s quality maintainability

Recorded with:
MSI Afterburner
– v.2.3.0
– MJPEG codec, “Full Frame”, 80% quality, 30fps
– Audio automatically records into PCM (“Uncompressed”) format

Recorded Game: 
Hitman: Absolution @ 1920×1080 (1080p)
– “Ultra” settings (Preset)
– Anisotropic Filtering set to 4xAA
– “Texture Filtering Quality” set to High Quality (i.e.Off/NoFiltering) in Control Center

– “Morphological” Anti-Aliasing (MLAA) setting (AMD/ATi) set to ON
– “Surface Format Optimization” set to OFF in Control Center (AMD/ATi)

Framerate while not recording: ~31-79fps
Framerate while recording: ~28-64fps

I chose some Hitman: Absolution clips for a Quality Test because it was a good example of a recent game (at the time of this writing) that includes both fast movement/action areas on the screen, as well as slow/non-moving parts, including text. It has lots of dark and light areas, high contrast edges, particles (rain/filmgrain/sparks,etc) and tests area panning as well.
I was impressed with MSI Afterburner and it’s utilization of the MJPEG codec overall. It seems to be slightly optimized or tweaked somewhat. At 80% Quality (to be in the realm of comparison with Bandicam’s MJPEG Preset Default of ‘Quality80’), flatter/darker parts were not overly compressed – which would create excessive macroblocking and/or be too smoothed out, normally. This could be partially due to the ‘Film Grain’ effect within the game, however (seen mainly when the sky or a flat-coloured background is in view).
In other words, there was very little Gibbs Effects aka ‘Ringing’ (“mosquito noise”) around elements such as text when onscreen, and what effects were there, were ‘hidden’ somewhat by the grain effect. You had to look closely to see it, which is still pretty good for not recording in a 100% Quality setting – but again, the ‘Film Grain’ effect in this game is contributing to this ‘negative effect of the MJPEG codec’ not being as visible.

A small amount of Gibbs Effects/Mosquito Noise/Ringing can be seen around and within the UPC symbol  from this frame taken out of the original MJPEG recording. It is about as visible and even seems to be less so in the video itself, due to the “Film Grain” effect present in the game helping to hide it. Click to see Full Size

The very small amount of color banding present in the original recording was somewhat generated by the Game Engine and there is very little of it (what does occur is hidden somewhat with the film grain effect the game has).
In the recorded output, thankfully there is very little, partially because of a higher-quality setting when used and how MJPEG codec handles color dithering; color banding usually won’t be seen very much at higher bitrate/quality settings (which means low compression), but will be easily seen at lower bitrate/quality settings (which uses higher compression).
Keeping above 80% quality when recording with the MJPEG codec [I recommend recording at 90% if your system can handle it, as most games do not have the Film Grain effect present in Absolution to help hide compression artifacts, such as color banding, flat color/area macroblocks and Gibbs Effects] if you have the space, it should leave you satisfied with easily-editable captures.

²**Quality Test Comparison – Four examples of various Quality Settings (90%, 70%, 50% and 30%) when using MSI Afterburner’s MJPEG Codec in Hitman: Absolution. The differences are most apparent in the middle section, the bricks that the police officer is standing on, and the people milling around to the left of the gazebo, both areas showing colour loss (Posterization) and detail loss (Quantization), more obvious in the 30% sample (bottom). All sources were original output frame extractions from 1080p recordings.
Click to see Full size

[A quick note here that MSI Afterburner’s output/recording seems to be somewhat darker than other game recording programs. It even states this in it’s own Options, “captured video may appear darker than you see it while gaming” and offers a checkbox that will apply Gamma Correction. Since this article is more about MSI’s MJPEG optimization and utilization (performance and ability to maintain visible quality), this ‘darker recording’ will be explored further in a future Game Recorder Comparison article]

For people trying out any game recording software and finding your recordings are choppy/laggy on playback (that is, when you are looking at the generated/recorded file), you should find that if you use a player/viewer that has Acceleration (GPU, videocard, DirectX processing), it should play back much more smoothly. If your system does not have this option, you can also try converting what is captured to another file temporarily, one with a smaller bitrate/size, and you should then find it will play back that converted file just fine (especially when recording with lossless/high-bitrate codecs).



It was interesting to do some side recording with Afterburner’s included RTV1 codec as well*
The Riva Tuner Video codec is an iteration related to older codecs such as Indeo Video and S3TC compression techniques. It is similar to MJPEG and it seems to have very little effect on performance while recording – even performing slightly better than MJPEG at times, which was a nice surprise. Unfortunately, it suffers from ‘color banding’ (Color Quantization/Posterization) and the result is apparent lower quality, even at high bitrate/quality settings. Although it may not be as obvious in the below comparisons (depending on the settings of your monitor/colors/brightness), and while it certainly does not ‘destroy the quality overall’ in the game recording, in the captured video the color banding can be very distracting, especially when it includes motion through the color and light changes in an area as you move through it [it may not be to everyone, of course]. The size of the file produced is quite a bit larger than when recording with the MJPEG codec as well, but more on that in a future article..

*As this article is mainly a Test of Afterburner’s usage of the MJPEG codec, a future Game Recorder Comparison article will include the RTV1 codec found in MSI’s Afterburner and cover it in more detail than here

¹**An example of the RTV1 codec’s problem with Color Quantization (‘color banding’). This frame is extracted directly from a 100% Quality RTV1 codec recording (Batman: Arkham City Benchmark @ 1080p). The areas that contain the most obvious color banding problem have been highlighted with green circles.

If you are having problems with Color Banding that is not in the game itself, try to use a higher-bitrate setting (higher quality) for the codec you are recording with, resulting in lower compression and lowered loss of details, if you can do so.
[With the RTV1 codec, it appears that it will still remain a little, no matter what…]


Getting back to MJPEG testing with Afterburner, framerate was maintained close to non-recording performance (at ~30-60+fps for this game) when recording. I usually used MSI’s Afterburner only as a monitor/controller for the videocards installed and captured with another program such as FRAPS or Bandicam. Using MSI Afterburner alone and having to run one less application in the background to capture no doubt had at least some sort of streamlining affect on performance. It felt that way, slightly.

Clear, crisp textures can be seen in this frame taken from the original MJPEG capture.
MSI’s Afterburner and it’s utilization of the MJPEG codec seems to be even slightly superior to Bandicam’s implementation of it. [Hmm..something that must soon be tested!]
Click to see Full Size

The Average bitrate of the original MJPEG captures was about 30Mbps up to 70Mbps, which meant a writing stream to the disk of up to 8MB/s, which almost any hard drive can handle (recorded onto a drive capable of 150MB/s at the time).
The original generated recording files were about twice the bitrate and size of the final MPEG-4 compressed file uploaded to YouTube, the final file weighing in at about 600MB with a bitstream of 25Mbps on average (it is assumed that almost everyone will compress recorded material into a final output video compilation file of 8-20Mbps or so, for uploading to YouTube/Vimeo/etc (Blu-Ray’s standard bitrate is 36Mbps and most video editing application presets go up to 20Mbps by default).
This final utilized bitrate, with the efficiency of H.264/AVC, manages to keep most of the detail that was in the original MJPEG recordings, although sadly, most of the finer detail is lost after uploading, as can be seen in the screenshot comparison below:

Originally used in an earlier article testing out MJPEG on Diablo3 with Bandicam, this screenshot shows examples of the detail loss after uploading to YouTube, when the video is played back at 1080p and 720p. Click to see Full Size 

What was more disappointing was that YouTube feels the need to overly re-compress uploads. Much of the quality is lost, especially things like the film grain, one of the ‘first things to go’ in temporal video recompression. For instance, at 1:03-1:08 there is visible grain effect maintained in the settings I chose for the final compressed output file, keeping most of the grain from the original MJPEG recording from Afterburner. In the YouTube Video Player after uploading, it can be seen that much of that grain is lost. Another example of this is the dense cornfield against the much flatter sky textures at 1:30-1:36. I kept the complexity of the cornstalks and hard contrasts of the plant details versus the sky on purpose, yet after YouTube’s recompressing of the video, the result is blurred and smoothed details that were not like that in the recorded MJPEG video or the final H.264/AVC high-quality video output/final compress. I will attempt other uploads of the data at various settings for experimentation and put it just below this paragraph when an upload does not lose much of the finer details I wish to share**. I understand they must do it to save space (no doubt people upload huge, ‘FRAPS-original’ size files and recordings sometimes), it is merely unfortunate. At least it then becomes an example of what happens to some of the quality and detail once uploaded to YouTube (the extracted frame above, for example, is from the original MJPEG recording produced by Afterburner). There seems to be no use, at this time, to attempt to upload extremely high quality/fine detail. 

 The file originally uploaded to YouTube, the results of the MSI/MJPEG Quality Test, was previously compressed with a bitrate of 25Mbps. While this bitrate, using high-quality H.264/AVC codec settings, was enough to maintain details such as Film Grain and high contrast edges, much of this detail was lost after YouTube recompressed the uploaded file. 

**Another, higher-bitrate excerpt [in an attempt to compensate for YouTube’s recompression] of the original MSI/MJPEG video capture:

This video then, is an attempt to compensate for YouTube’s recompression and data loss, by uploading a video stream with a very high bitrate (an average of 60Mbps, up to 80Mbps, higher even than the original recorded data). As such, the duration is much smaller, a mere excerpt of the original intended upload.

Result: Even when a video stream is uploaded with the much higher bitrate, even when the original captured file is uploaded, even when I rendered the capture to a 2160p (4K UltraHD) file and uploaded that to YouTube, YouTube’s recompression of the uploaded material (while still watchable) loses far too much detail from the actual upload – at least for high-detail evaluation of a game recorder’s produced video streams. This is unfortunate. For now then, I will try to always show frames (screenshots) extracted from the original captured files created by game recording applications in Quality Tests…

Turning up the Recording Quality setting to 100%, the bitrate for MJPEG jumps up to over 275Mbps (over 30MB a second of file size being written to the drive). Quite a jump – and at that bitrate, the size becomes comparable to a YUV codec (or a FRAPS 1080p half-size recording) easily – but the quality ramps up as well. Color dithering and loss of detail is surprisingly near-negligible at 100% Quality with this game, yet the resource demand for using the MJPEG codec [especially MSI’s optimization of it] seems to remain small, as MJPEG was already a lightweight codec with somewhat smaller processing being done, to begin with. Today’s powerful videocards and CPU’s should be capable of pumping out a sequence of lightly compressed JPEG’s in a single file [no pun intended] without breaking a sweat. As long as your system isn’t chugging along already, adding some MJPEG capturing shouldn’t affect it very much. For those of you with slightly older systems with trouble recording in other codecs, give MJPEG a try, it should record smoother for you.

Overall, well done MSI.  /clap

If anyone is looking for a completely free Game Recording program (it might have even come on a disc with your videocard, as mine did) look no further than MSI’s Afterburner. Keeping the settings relatively high [especially with the MJPEG codec, to keep compression artifacts low] and/or doing your own tests to see what looks ‘good enough’ for you, I suspect many people will be happy (if you aren’t already) with using Afterburner and the low-resource-demanding and editing-friendly MJPEG codec to record your gaming adventures.

Please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – do a few short tests and use what you prefer.

Have fun recording with MSI Afterburner and the MJPEG codec – and See you in the games!




[Note: As noted throughout this article, this testing of MJPEG with Hitman:Absolution alone is not a full test of MJPEG quality maintenance potential, as this game utilizes a “Film Grain” effect, which hides some of MJPEG’s weaknesses in maintaining Quality. In a future post (Part II), a more in-depth examination of MJPEG as a video game recording codec, using other games and utilities, will be actualized. See you then!]

LUXURY GIRLS BEDROOM DESIGN DECOR STYLE GOOD

The design of a room can be a major problem in the redesign of your home. The problem could grow if you have to do for a child – a girl in particular. But do not worry, because we had some bedroom design ideas for the creative minds of the people working with the Italian girls.

LUXURY GIRLS BEDROOM DESIGN DECOR

LUXURY GIRLS BEDROOM DESIGN DECOR

They work in an atmosphere of classic charm in a contemporary way through a range of unique colors. Most models adopt a classic style, with good curves and cushions, and a pile of wood painted to create the perfect atmosphere for your little princess.

LUXURY GIRLS BEDROOM METAL DESIGN DECOR

LUXURY GIRLS BEDROOM METAL DESIGN DECOR

LUXURY GIRLS BEDROOM DESIGN IDEAS

LUXURY GIRLS BEDROOM DESIGN IDEAS

LUXURY GIRLS BEDROOM DESIGN CONCEPT

LUXURY GIRLS BEDROOM DESIGN CONCEPT

Trip to Hyderabad Cont……

Today I am leaving to Hyderabad for the assignment. Funny, there seems to be a lot of things that we do when doing an overseas consulting assignment but don’t really talk about it. The stuff we do for preparation has two parts

Things considered as part of consulting process
Marketing, prospecting and selling
Proposal, budget & contract
Invoicing and receiving advance payment
Preparation / Intake

Things that are part of the consulting process but gets taken for granted
Requesting Invitation Letter to process visa
Applying for visa
Travel & Medical Insurance
Foreign Exchange
Transport to and from Airport – in your country and the country you are visiting
Travel advice regarding security, weather etc

I addition it is up to the consultant to find out about interesting things in the city s/he visits. In my experience some assignments will give you a bit of time in the evenings and it can be boring to be stuck in a hotel all the time. Suggest the web or lonely planet for this.

Also rule of thumb is exchange a bit of money at the airport itself. Trust me you will spend more time and money in trying to look for better exchange rates.

Quick Tip: Getting ACTION, Dxtory, FRAPS and More Working With Battlefield:Hardline [Fix/Workaround]

I have been doing some Recording Tests over the past while with Mirillis’ ACTION – for those who aren’t familiar with it, ACTION is a game recording application, similar to MSI’s Afterburner, Bandicam, Playclaw and others – and I was reminded that it does not automatically “work” with Battlefield: Hardline [that is, ‘hook onto it’ or ‘detect-it-and-get-ready-to-record’]. I actually remember running into this issue during the Beta, but at the time I merely used another recording program and didn’t think much of it since. To find out more about this issue recently (since reminded of it) I dug around a bit and did a few tests, trying to find a solution and/or conditions it did work under – and wanted to share my few findings as a ‘Quick Tip’ for others, here.

Looking around, I found out that this is still an ongoing issue with Battlefield: Hardline – and before that, it was to some extent with Battlefield 4, even causing BF4 to ‘crash’ on Startup for some people. I also found out that these issues occurred not only with ACTION, but also with other similar programs, such as FRAPS and Dxtory, according to the Battlelog Forums and the main Mirillis Forum. In many places, I found the same solution stated again and again by helpful posters… So, I tried it out – and it worked perfectly! I repeated testing with it a few times – and once I was satisfied it solved the issue and was repeatable (for others to use), I wanted to share it here, with you.

Here are the steps of what to do [with a shortcut I figured out, to type it in faster/easier, near the end of this post]:

  • In the game, hit the Tilde key (“~”, which looks like a ‘squiggly’ line – the key is in the upper-left of Standard keyboards, to the left of the Number 1 and above the Tab key), which should bring down the Console. In here, you can type in commands for the game.
  • Type the following in one line:

    RenderDevice.PresentAsync 0

    (That is, “render device dot present async”, then a space, then a “zero”)

  • Hit enter and then you can close the Console by hitting the Tilde key (~) again.

That’s it!

As long as that is all you want to do in the Console (you don’t want to enter in any more commands), you can then just close it, as it is done – those are all the steps to do. You should then see the HUD (indicator) for ACTION pop up on the screen in the corner you chose in the “HUD Settings” section, in ACTION.

Note that this may not always be needed… For example, if you launched BF4 in Windowed or Borderless modes, it may not be required. In Battlefield: Hardline, it seems to be needed no matter what mode you run the game in [for the interface of these programs to be shown and able to record without issues]. For example, I just started up Hardline in Windowed mode a couple of times as a test – with ACTION and FRAPS – and those steps were still needed to get these ready to record (their little hud/ui/interface did not show up at all until the above command was entered. 

Another way I saw suggested in Forums, was to enter in the command via a User Configuration file (User.CFG), created in the game directory. For those who don’t know, a User Configuration file is simply a text file that the game will ‘run’ when it starts up – and this text file can have commands listed in it, so that you don’t need to manually type the command each time you play the game.

Although even a Battlelog Moderator suggested it at one time, here, it seems it is possible that this process can be “detected” or “seen as” a hack – and you can effectively be Banned, Blacklisted from Ranked Servers, and other negative actions taken against you – as seen in this thread at the Mirillis’ Forums, here… Although I am sure there are many people out there using this command in a Configuration/Startup File without issue, as it has happened to some people in the past…I personally would suggest against going this route, for now, and merely type it in whenever you want to use ACTION/Dxtory/FRAPS/etc to record your gameplay in Battlefield games.

On my own, I figured out a faster way of typing this command into the Console and wanted to share it here – apparently the Tab key will try to ‘guess’ at the terms you are typing in (much like the Command Line or Terminal in Unix, Windows, and other operating systems [black box screens that you open to enter commands]) and by using the Tab key, you can quickly enter the command above by using these steps, after opening the in-game Console with Tilde (~):
Hit “r” then the Tab key
Hit “d” then the Tab key again
Hit “p” then the Tab key one more time
Hit “0” (zero) and hit Enter
That’s it! 
R-tab-D-tab-P-tab-Zero. Done! Now, the same command as above has been entered even faster and you should see the HUD/indicator for your preferred recording program pop-up on the screen – and you can now record your battles once again. Here is an example/reminder GIF of using the Tab input method for this command, in Hardline:

GIF Example/Tutorial/Reminder of How To Get ACTION, Dxtory, FRAPS And More to Work With Battlefield:Hardline
(Click to see Full Size – Save and Share with others!)

Hopefully the above gets these programs working with Hardline for you too, dear reader, as easily as it did for me.

See You In The Game!

[Personal Log TwoZeroOneSixPointSix: I could not find the ‘original’ bearer of this wonderful information, to give Credit to them – and to find out “why” it solves the issue with these few recording programs (as I am not a programmer, the reason is not immediately obvious to me) and I always like to try and share the “why things work” of solutions I present, to others as well. I eventually assumed it was a developer at some point in time, but in the vast posts of passed-on knowledge, their name has become lost into the aether… Regardless, I want to say ‘thank you’ to whomever this helpful dev is – and I want to pass on that thanks to all the other anonymous sharers of this tip [about this issue with Hardline] on Forii everywhere. This QuickTip is merely a culmination of, or passing on yet again of, this great bit of information on this issue with these few game recording programs and Hardline. Enjoy]

the 2018 La Jolla Concours Best of Show award was presented to the Mullin Automotive Museum for their 1939 Bugatti Type 57SC Aravis Cabriolet.

The Mullin Museum is a must see, they have an incredible collection of Bugatti. Probably the 2nd best collection you will ever be able to see, and probably the only Bugatti collection in the USA available to the public.

http://justacarguy.blogspot.com/2012/01/mullin-museum-what-it-looked-like-from.html  for a quick look

http://justacarguy.blogspot.com/search/label/Mullin%20Museum  for all the galleries from when I was there in 2012

and for a more thorough gallery of this car http://justacarguy.blogspot.com/2011/12/beautiful-bugattis-from-mullin-museum.html  and that’s why I didn’t take another set of photos… there isn’t much reason to look at two sets of the same car.

How to Deal with Yourr Seasonal Allergies

S
Seasonal allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
What are Allergies Anyway?
Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
Strategies for Allergies
Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
Increase your intake of Omega 3 Fatty Acids from cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
Nutritional Supplements for Allergies
There are several highly effective nutrition supplements for allergies including some key herbs.
Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and a good quercetin supplement is a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.    Another excellent Quercetin Supplement is “Qforce” – http://www.qforce.com/ Quercetin is proven to decrease yur chance of contracting a viral illness like the cold or flu by 9 times!
Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

Personal Log: Might not be able to post for a bit longer still… [Editorial/Personal]


Personal Log, Stardate 20160901 [I have no idea how that works heh]

Just a quick Personal Note to say that I apologize to my dear readers for not posting anything for a while, and that I may not be able to post for a while longer yet… I have been experiencing a worsening of my ongoing symptoms… I may be okay in about week or so and finish up some Project irons I have in the fire; but I don’t know, it may take longer than that to get back up to the point where I can play and finish testing some recording programs I was working on, and post about it all…

< Potentially Sad Talking About Sicknesses Follows, In Case Of Feels, Stop Reading, Play Game >
I’ve never really mentioned what I have or what I go through before, since starting this Blog five years ago.. I didn’t really want to trouble people or put those thoughts/feelings on them, but I have had a few people ask me personally what it was – and I was looking something up recently about my condition (it’s a condition I (and Doctors as well) are constantly having to learn about) and I read quite a bit about other similar stories, where other suffers were in much worse condition than me… They were literally bed-ridden… And while I was also like that for the first couple of years, I have improved slowly over time to the point where I can sit up, and sometimes even play games, and on good days work on an article and do things around the house… 
My condition is Myalgic Encephalomyelitis, which is an infection of the brain and spinal column, which gives components of Chronic Fatigue (getting tired easily with a slow recovery rate (as in days) if I go to the store, etc) and Fibromyalgia (inflammation and pain in all areas of the body, like when you get a ‘flu’ and are sore all over? it’s that, all the time…heck, many of your Aunts or Mothers may have Fibromyalgia, so you may have heard about it..). It is not a well-known disorder, despite millions of Americans having it.

Every year I learn something new about it or studies that found out something new about it; but nothing is ever concrete on ‘how to get rid of it’, unfortunately. The only good part about that is, is that all Doctors have concluded that it is “something that goes away on it’s own, but noone knows when”… Some people have it for a year or so and some have it the remainder of their lives. I am in my 10th year now, but as I have said in the past, I try to always see the positive in things and I have been slowly improving overall, slowly over the years…

I don’t want to make anyone feel sad, I am sorry if this information does… I merely wanted to inform my readers that I may not be able to post things I have been working on for a while longer… Some of the things I was working on are: GPU-Accelerated Game Recorder Comparisons (Playclaw, Bandicam, Mirillis Action, D3Dgear, and more), First Impressions of some games that I started work on already (The Elder Scrolls Legends Closed Beta, Dropzone Closed Beta, A Return To The Elder Scrolls Online (I was in the Beta for it) and others), bringing back the “Can You Guess Where The Screenshot Below Is From” (there have been no winners so far and I have some Giftable Games a-waiting on Steam and GamersGate) and even more projects that I don’t want to mention yet – to keep them a ‘surprise’, heh).

I enjoy writing my articles and posts here, helping others with the information I have figured out, found or collected, doing testing, giving tips of games and even Video Editing and showing effects of settings in both, including also creating the Headers and graphics utilized here (they are all done by me)…
I plan to continue doing this for a long time to come… I just realized there has not been much the past little while and wanted to let you all know there may not be some yet for just a little bit longer (‘recovering’ from a Cold or “doing too much” takes about a week or more each time I do something or get a cold, to get back to where I was, with this illness, everything takes far longer..).
Thank you for your patience, my wonderful readers, and I hope that I can contribute helpful information again for you, in the near future.

Sincerely,

~Troy from The Game Tips And More Blog

Workout Anytime Featured in Franchise Times

Workout Anytime was recently featured in the Franchise Timesin an article titled, “Nest Eggs: Done right, a rollover of retirement funds can be smart option”.

The article is a trend piece on franchisees using their 401(k) to purchase their business. John Heifner, Workout Anytime franchisee, gives great insight into how he went about purchasing his Workout Anytime with the use of his 401(k). He went on to say “Starting our third year, I can start thinking about funding a retirement again instead of keeping my money more fluid for cash flow.”

Click HERE for the full article or begin reading below:

Nest Eggs

Done right, a rollover of retirement funds can be smart option

By: Jeffrey McKinney
More franchisees are using their 401(k) retirement funds to finance the purchase of a franchise. Who should consider the move? Experts explain the do’s and don’ts, including warnings about strict IRS rules.

Jeremy Turner’s decision to pretty much tap out his retirement funds to buy a Lawn Doctor franchise was very clear: He calls it the best option he had after banks would not lend him the money.
Turner withdrew $70,000 from his 401(k) plan and another $30,000 he and his wife had in savings to start the lawn care business in St. Louis in 2010. Turner says he discovered companies charge around $5,000 to help complete the financing process. “I would not suggest that someone try to do this on their own because of tax and other risks involved,” he says.

Men’s Body Click Diet part 1

In the summer the men had to cope with constant daylight, so they were missing the normal cues to go to bed. ‘When it’s daylight, even though it’s midnight or one o’clock in the morning, you don’t think of it as being the time to go to sleep,’ says Dave. ‘Your mind just says, hey, there’s work to be done. I may be tired but I’m not recognizing the need for sleep because it’s daylight.’

Already lacking the strong time-giving effects of light, the men could not set their body clocks by what they were eating, either. ‘We had four meals a day. Two of them occurred at noon and midnight, the other two at six in the morning and six in the evening,’ continues Dave. ‘One of the difficulties in telling what time it was, was that the 6:00 a.m. and 6:00 p.m. meals were powdered scrambled eggs and the other two meals were stew. So if you woke up at six o’clock and went into the galley for a meal and you had powdered scrambled eggs, you didn’t know whether you were having breakfast or dinner.’

Despite losing the signals that are normally provided by the cycle of light and dark, the timing of activity, intake of food, reasonable work shifts or even simple obedience to the clock, most of the men managed toget through without becoming acutely sick or injured. But some of them developed a condition they called Big Eye, in which they became stuck in a sleepless state. Almost everyone had duties that required exhausting physical labor, but even so, the men with Big Eye failed to sleep for days.

Diet Start

The men with Big Eye demonstrated that the body’s flexibility is a double-edged sword. The loss of essential time givers easily disrupted their circadian rhythms, probably setting them up for health problems if they continued down that path. On the other hand, proper application of some fairly simple rules for circadian health could have rescued them. And the same rules can rescue you from a potentially perilous state of disorganization.

The Body Clock Prescription reinforces strong circadian rhythms; produces better sleep, enhanced moods, alertness and energy; and reduces the risk for reproductive cancers for everyone. In addition to these overall improvements in health and well-being, there are specific aspects of the diet that have a favorable impact on prostate health, a subject that provokes anxiety for many men.

Prostate Ailments: The ‘Male Problem

There is certainly cause for concern. Prostate ailments are an almost universal threat to men in Europe and North America. Among men in the United States, prostate cancer is the most common cancer; it is also the second leading cause of cancer death.’ In addition, countless men suffer from other prostate problems. This phenomenon represents a kind of `male problem‘ corresponding roughly to what used to be called ‘female problems’, a much less specific collection of gynecological woes that were lumped under this heading in the mid-1900s. The notion of female problems embraced excessive menstruation, infertility, irregular periods,cramps, vaginal discharge and other kinds of medical mischief that women endure.

The male problem is more localized in the prostate gland, the part of the male reproductive system that secretes fluids that help transport sperm. Nevertheless, it is a fairly complicated picture, which includes inflammations of the prostate, a common condition known as benign prostatic hypertrophy (BPH) and prostate cancer.

What’s more, prostate problems may lead you to needing a cystoscopy, where a narrow flashlight is inserted into the hole from which you pee until it arrives in your bladder. On the way, it passes through your prostate gland. Cystoscopy is a procedure that causes ‘big eyes’ in the bravest of men.

Besides cystoscopy, the other method often used to examine men with prostate complaints is digital rectal examination, in which the examiner can feel the profile of your prostate gland. (Digital refers to the doctor’s finger, not his computer.) Both give much less information than you would expect to get from such relatively invasive procedures. Opening your mouth and saying Ah’ discloses much more about your teeth, gums, tongue and throat than any rectal exam reveals about your prostate, unless you have a huge lump. Ultrasound, magnetic resonance imaging (MRIs) and computerized axial tomography (CAT) scans are necessary to get a good picture of what’s happening to this gland, whose actual location on the floor of your pelvis seems mysterious to anyone who has not studied anatomy.

Diet and Prostate Health

If you look around you, especially as you get older and start hearing stories from men who have prostate trouble, you may wonder if there’s something simple you can do to avoid it. I’m not talking about early detection, which is mentioned frequently these days. (Of course, most men’s idea of early detection is that early next year or the year after would be just fine.) Nor am I saying that a good history, physical exam, measurements of prostate-specific antigen (PSA), a common blood test used to screen for prostate cancer and other indicators of your underlying health, prostate or otherwise, are not a good idea.

But you’re misplacing your priorities if you go through those procedures without making some modest changes in your diet now to prevent troubles in the future. Most men who have a reasonably healthy personal and family medical history and who don’t abuse themselves with excesses of drugs, tobacco and alcohol, other risky activities or excessive inactivity can probably remain free of obvious symptoms even if they don’t implement all the points of the Body Clock Prescription. Some of these pointsare aimed at people who are trying to get out of serious medical trouble or who have risk factors that call on them to follow the diet very strictly.

Naturally, the more closely you follow the Body Clock Prescriptionthe better, but if you do nothing else, I urge you to consume soy protein and flaxseed powder daily to prevent prostate problems. By making these simple dietary changes and keeping your mind open to the possibility that fungal infection, intestinal overgrowth or allergy might have a hand in any prostate inflammation that is not otherwise easily diagnosed by a physician, you can go a long way toward avoiding the possibility of getting prostate cancer, as well as the other problems that frequently lead men to undergo cystoscopy.

Food Repair Guide: Baking Part 1

Bread

Bread, being about the first thing that man made, is also about the easiest. Ordinary bread is only flour, salt, liquid and yeast, well kneaded to mix, and baked. The modern cook with a food processor need not even bother about the kneading (which is only done to spread the yeast really thoroughly through the bread) as the food processor does it all for her. Unless, of course, she enjoys doing battle with balls of dough!

Ingredients/yeast

Flours differ but, as long as the flour is of good quality and dry, the differences are a matter of personal taste. Water is the normal mixing liquid and sea salt has a better flavour than table salt.

If the yeast is fresh and alive, when put in a damp, warm atmosphere, it will rise and grow whether it is incorporated in a dough or alone. Old age kills both compressed and dried yeast, as do extremes of temperature: anything over 110°F/50°C or below standard refrigerator temperature.

Once the yeast has been creamed by mixing it with sugar and a little warm liquid, it needs only to be thoroughly amalgamated into the dough, by hand or machine.

Diet Start

Rising, etc.

After the yeast has been mixed in, the dough must be left to rise, and in some cases prove. This will happen more or less quickly depending on the ambient temperature, but the longer it takes, the better the bread will be. Elizabeth David, among others, maintains that bread that has been left for 24 hours in a moderately warm kitchen will taste far better than bread that has been ‘hurried’ in a warming oven. However, an hour should be the minimum time — unless you are using a food processor and extra vitamin C to assist the raising.

If the dough does not rise, it means that the yeast is dead — whether through old age or overheating — and there is nothing you can do about it. Dead yeast has a smell and flavour not unlike dead cats and is totally unrevivable. Throw it out and start again.

Once you have mastered the basic techniques of bread making, all fancy breads are merely an elaboration on them. Most bakery books are extremely explicit in their instructions.

Cakes

Raising agents

Most cakes use eggs or chemical raising agents rather than yeast. The lighter sponges use whisked egg white; heavier sponges or fruit cakes use whole eggs or a combination of whole eggs and baking powder or bicarbonate of soda. These work by giving off gases when heated, thereby raising the mixture. The more chemical raising agent one uses, the lighter, dryer and less keeping the cake will be. Thus, fresh light sponges or angel cakes should be eaten within 24 hours to be at their best; a rich Madeira cake will keep several weeks; a fruit cake several months.

Mixing

The early mixing processes in all cake making are important, be it beating eggs and sugar to a ribbon or creaming butter and sugar for Victoria sponges. In both cases, early and thorough beating ensures that the cake will remain moist. Beating later in the process when the flour has been added will make the cake tough, heavy and elastic. Obviously, beating a light sponge after the egg white has been folded in would defeat the purpose of the operation.

For cakes that need to hold a filling in place — such as a cherry Madeira where you are attempting to keep the cherries in suspension — do not add all the liquid until you are sure that the full amount will not make the mixture too liquid to support the fruit.

Packet mixtures

If you feel that you cannot face the traumas of total cake making, there are a great number of excellent packet cake mixes on the market and you might be well advised to give up the whole business of being a home baker and use one of them.

Cooking

Follow the instructions in the recipe (or on the packet) for baking times and temperatures but do check yourself, as your oven may not behave exactly as the instructions say it should. Do not, however, continually open and shut the oven, as you will kill whatever chance the poor thing had of rising evenly in a constant heat. Similarly, when you test it, do not be too vigorous. If a light sponge gets a fat skewer stuck in it, it will break the crust and release half the air being carefully husbanded inside. Press the sponge very gently with your finger and, if it resists, it will be done. A more robust cake will stand the skewer treatment but, even then, do not do it more than you must.

Turning out

Whether the mixture is from a packet or home-made, it is most important that you are able to get it out of the tin when it is cooked. Greasing and flouring tins should work but has been known, only too often, not to — especially if the butter was salty! Invest in one, or several, loose-bottomed cake tins, which guarantee complete success — not only for cakes but for pâtés, mousses, jellies or anything else that you fear may lurk shyly in its container and refuse to emerge in public. If the mixture is very liquid, as in a very light sponge, line the tin with greaseproof paper to prevent it leaking out the bottom.

Wauconda WORKOUT ANYTIME Opening Doors Soon

Wauconda WORKOUT ANYTIME Opening Doors Soon

The new Wauconda WORKOUT ANYTIME, owned by Jeff Cercy will be opening their doors by the end of the week. The club, located on Liberty Street in the Jewell Osco shopping center, will be celebrating their grand opening on March 22nd. The equipment is all in place and the final touches on flooring and painting has all been completed.

The public is welcome to come out and see the new club. Those interested in joining can call 847-526-4088 or register on the club’s website: http://workoutanytime.com/locations/wauconda.

The Question of Alcohol in you Diet

Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

Diet Start

Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

My trip to Yapahuwa

I just completed an assignment for an international networked organization. They are in the process of establishing and sustaining a national level sister organization with district level branches which will belong to the same network.

The assignment was to critically look at the activities undertaken to sustain the district level branches. Well basically looking at the resource mobilization of each branch.

When considering resource mobilization for the development sector one automatically recalls the telethons and other fundraising activities done by charities to raise millions of dollars; quite similar to the ones that are going on for the Haiti earthquake relief operations.

However resource mobilization in the 3rd world is quite a different matter. It is fundamentally handicapped due to the following reasons.

  1. Most INGOs and Local NGOs operate in the 3rd world as project implementers. Therefore their articles of association / constitutions do not provide for resource mobilization (self generated / self raised funds).
  2. Due to above most states (in Asia) do not recognize them as registered charities that qualify for fund raising which is tax exempt.
  3. They are only allowed to receive funds from donors who already have funds or who have access to funds. Generally these funds when received in the implementing country are exempted from income tax.
  4. In fact, the local legislations which facilitate the registration of these entities for legal purposes themselves disallow any kind of activity which earns an income for the organization.

So, in order for an organization (NGO) to be legally able to engage in resource mobilization they have to:

1. Ensure that the articles of association / constitutions that they operate under provides for such activities.

2. Get the governments to recognize them as charities (this is generally done by conforming to already existing legislation or you would need an act of parliament or for parliament to pass new legislation to facilitate this).

3. Once you are registered as a charity that qualify for fund raising which is tax free you can look at the spectrum of resource mobilization activities which are at your disposal.

Fund raising activities in general falls in to the following broad categories.

  1. Cause / Issue based (HIV/AIDS, TB, Child Labour, etc.).
  2. Event based (Tsunami, War, Earthquake, etc.).
  3. Faith based donations to religiously affiliated organizations
  4. Bi-lateral funds.
  5. Multi-lateral funds

There is however another resource mobilization strategy which is “Income Generation Projects” which is: an organization (NGO) can engage in commercial activities such as training, providing a chargeable service, renting of assets, producing some products etc. to generate a profit. This profit is then used for development activities.

If an organization (NGO) wants to use this strategy they need to ensure that the articles of association / constitutions as well as the legislation / act of parliament clearly addresses’ this activity. Otherwise an organization may become liable for income tax. This risk may jeopardize the sustainability of the organization; therefore careful consideration must be given to the legal landscape before engaging in such activities.

However my client has started several “Income Generation Projects” without considering the above. There is a huge risk associated with this and no remedial action is being taken.

As for the income generation projects, they seem to have been started based on good ideas and not based on the profit they can earn to sustain a development project or a part of a project. Further they are being executed by the same staff taken to deliver development services (who by the way have no business skills) to the target groups; needless to say that the “Income Generation Projects” are doing poorly. They are hardly making profits some are making huge losses. In some cases, not only are they making losses, but they have very high turnovers which go beyond the value added tax threshold (VAT). This is a huge risk for the organization.

The assignment was well received by the client and they have already engaged me for a follow up assignment to develop realistic business plans for the “Income Generation Projects”.

Yapahuwa is a historic / archaeological town which boasts the second rock fortress of Sri Lankan kings. It is close to many not so famous archaeological sites and now boasts a new hotel – Yapahuwa Paradise. I recommend a visit to Yapahuwa if ever you are in the north west of Sri Lanka.

speed camera major malfunction? Or lazy police not reviewing photos? New Orleans police failed to review tickets generated by the automated cameras, and one guy has 10 tickets over 7 years for his parked truck

Actually, make that 11. After the first story ran last week, Schultz received another ticket on Saturday night. A security camera shows this one was actually triggered by a New Orleans Police Department vehicle speeding down the road, but as usual, Schultz was the unlucky recipient of the fine.

http://www.thedrive.com/news/20011/new-orleans-speed-camera-keeps-issuing-speeding-tickets-to-parked-cars

End result? More proof cops don’t give a shit about their jobs, and neither does the mayor or city of New Orleans. 2 cops certified that the two tickets initiated by speeding police vehicles (as seen in the video) went to Shultz. That’s just bull shit. Cops are speeding in a residential neighborhood, and other cops that are supposed to look at the damn photos, are not, they are rubber stamping them all. 

Deals And Sales – ‘Things Goin’ On This Weekend’ (Weekend of August 11th, 2017) [Notification]

Just a quick Notification of some things going on… Once in a while, I try to post about Sales going on somewhere – especially the ‘big’ ones, like Summer’s End or Christmas Sales. This weekend, there are a few ‘Free Weekends’ and Sales going on (that I saw so far) and thought I wanted to share them, just in case there were others interested in these games, heh. Here’s what I saw is Goin’ On This Weekend:


Guild Wars 2 Expansion (Path Of Fire) is Free To Try all weekend:

https://www.guildwars2.com/en/news/get-ready-for-the-guild-wars-2-path-of-fire-preview-weekend/

GOG.com (formerly Good Old Games) is having a couple of Sales on games which include series like Master Of Orion, Warhammer 40K, Painkiller, Delta Force, Red Faction and at the same time having a sale on Strategy Games like Codename Panzers, Men of War, Hybrid Wars, Total Annihilation, Empire Earth, and more:

https://www.gog.com/promo/20170807_weekly_sale
and
https://www.gog.com/promo/20170811_special_promo_strategy_sale

Some other games, which are Free To Try all weekend via Steam, are:

For Honor, the medieval swordplay/battle game is Free To Try all weekend and selling for half-price
(for those that remember Die By The Sword, it looks like it may be similar to that, but in an ‘arena’ setting [sorry, but I haven’t been able to try it yet]):

http://store.steampowered.com/app/304390/FOR_HONOR/

Saints Row IV, from the crazy “each game is increasingly like GTA-on-drugs” open-world/action
series, is Free To Try all weekend and selling at a reduced price
[I haven’t tried it yet, but I am still playing the wacky Saints Row III once in a while and still getting a kick out of it]:

http://store.steampowered.com/app/206420/Saints_Row_IV/

Sorry I didn’t get to finishing this sooner, but the weekend isn’t over yet! Get out there and try these games out or grab something you want on sale – and maybe See You In The Game!

Edit:

I completely forgot one more I was going to post in here! 

GamersGate also has some games on Sale right now, including Borderlands (for five bucks!), the Mafia series, Bioshock series, Xcom series, and more:

https://www.gamersgate.com/offers

[Note: I am not affiliated with these game sites, nor do I receive any compensation for mentioning them here (the Links do not have any ‘affiliate tags’ or similar additions to them) – I am merely an enthusiastic gamer and like to share deals and other goings-on with other gamers like me. Enjoy!]

The “Basic Seven” Foods

1. Green and yellow leafy vegetables. These may be used either cooked or raw, fresh or frozen. They include cabbage, lettuce, broccoli, sprouts, asparagus, spinach, celery, and similar greens. These provide vitamin A to protect eyes and skin and to guard against infection. They also provide iron for the blood and roughage for elimination.

2. Fruits—at least two each day. One may be an orange or some other citrus fruit. Another may be a banana, tomato, apple, pear, peach, a bunch of grapes, or some tropical fruit. For variety use strawberries, canteloupe, or some type of melon. These fruits provide vitamin C, which is essential for strong blood vessels and healthy gums and teeth. They also provide roughage for better elimination. Fresh fruits are best for these purposes. Heat destroys vitamin C.

3. Potatoes and other vegetables. Two or more servings should be eaten each day. These include Irish potatoes, sweet potatoes, yams, beets, carrots, parsnips, lentils, onions, peas, beans, soybeans, and many more. Vitamins and minerals are present in all vegetables. Potatoes are a good source, especially when cooked in their skins. Vegetables may be used in various ways. Raw carrots are an excellent source of vitamin A. Vegetables provide bulk, which aids digestion.

Diet Start

4. Milk and dairy products. The very minimum for an adult should be a pint a day, or more, and a quart a day for each growing child or pregnant mother. Nursing mothers need even more. The milk may be in fluid form, as whole milk, buttermilk, skim milk, canned or evaporated milk, condensed milk, dried milk, or some form of cheese. One ounce of cheddar cheese is equal to a cup of milk. The milk can be used as a beverage or in cooking, such as soups, puddings, and desserts. Milk is a fine source of protein. It also provides minerals, vitamins, and especially calcium, which is needed for bones, teeth, nerves, and muscles.

5. Protein foods. Foods that are rich in proteins include beans, peas, soybeans, nuts, peanuts, eggs, meat, or fish. Soybeans are the richest source of proteins known. They are far richer than eggs, liver, kidney, or any other meat products and far less expensive. They have been used in the Orient for many generations. Dried peas, beans, lentils, and peanuts are all similar to meat in food value.

6. Whole-grain breads and cereals, at least two or three slices of bread and one dish of cooked cereal each day. These are particularly valuable for growing children and adults who work hard. Whole grains include wheat, rice, barley, corn, and other grains. “Enriched white flour” is better than ordinary white flour, but it is still lacking in certain essential elements. Grains and cereals provide calories for energy, as well as vitamins, minerals, and roughage. Whole grains, freshly ground, are best.

7. Butter, cream, fortified margarine, or other vegetable fats. A certain amount of fat is essential in every diet. Salad oils, olive oil, corn oil, and similar products may be substituted to meet the daily requirements for fat in the diet. Fats provide calories for heat and energy. They yield more than twice as much energy as carbohydrates.

Other foods rich in fats are egg yolk, vegetable oils, olives, nuts, and soybeans.

These are the “basic seven” food groups. One or two from each group should be included in the diet of the whole family every day. The quantities need not be large. The wider the variety, the better. Serve each food attractively. Eye appeal is always important.

In considering the “basic seven,” you will notice that there is no mention of white sugar, spices, or condiments. None of these is essential in the diet. Ordinary white sugar does provide energy, but that is all. There are no vitamins or minerals in refined sugar.

In addition to these “basic seven” food groups one should include at least six to eight glasses of water each day. Water is necessary for removing wastes from the body. It aids in maintaining a normal temperature and in moistening the air we breathe. We do get some water from our foods, but not nearly enough to supply all our needs. Many who complain of sluggishness, fatigue, and nervous headaches would feel better if they were taking more water. It is best to drink between meals. Drinking water should be pure and free from harmful germs. If in doubt, boil the water before using it.

Over two thirds of the human body is composed of water in some form or other. This means that a person weighing 150 pounds has more than one hundred pounds of water in his physical make-up. Even the bones are one-third water. Without sufficient water, the blood cannot circulate properly. Nor can the digestive organs work as they should. All the cells need water. This is the remarkable fluid in which myriads of chemical and electrical reactions are taking place all the time.

A reliable supply of pure water is essential to the life and health of every family. One may live quite a while without food, but not more than a few days without water. There is no substitute for water. It is indeed the liquid of life. Those who follow the “basic seven” in their choice of foods and include a generous supply of pure water need never fear. They will be taking a balanced diet, and they will feel the benefits of good health all their lives.

reACT Trainer Total Body Circuit Workout

One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

Horizontal Press (chest press of some type)

Horizontal Pull (Row of some type)

Overhead Press

Vertical Pull – (some type of vertical pulling movement)

Here is a sample reACT Trainer Total Body Circuit:

10 TIPS TO DECORATE KIDS BATHROOMS

Teach young children the fundamentals of responsibility bathroom can be a challenge. From potty training to control the way you brush your teeth, bathroom children should be a place of inspiration and pleasure for them to learn and grow. Child bathroom decoration can borrow design elements of your room. With color, the creative organization, and areas designed exclusively for little hands and creative minds, here are 10 tips to decorate their bathrooms. Depending on the age of your children, follow these tips to design your age in mind. For young children, bright primary colors are inspiring, and for older children feel more mature palette of neutrals and pastels.

KID’S BATHROOM DESIGN

KID’S BATHROOM DESIGN

1) Create a colorful background: Although most of the plumbing fixtures remain in neutral shades of white, bone or brown, it is essential to their subject is colorful and fun. Consider painting the vanity, wall, wallpaper, stenciling and playful lyrics on the walls. Be careful when you use the stickers that moisture in the bathroom can lead them to ignore good.

2) Keep the walls with clean surfaces sustainable: When decorating a child’s bathroom, especially around wet areas such as toilets, sink and bathtub, make sure the surfaces are easy to clean and durable. ceramic wall tile, wall painting wainscoting panels are washable and ideal.

3) Provide adequate lighting. This advice applies to any bathroom! You do not have dark areas in the bathroom. In terms of cleaning and a bit to see what they do. Bathrooms for children are a priority area of ​​injury, as wall lighting, overhead ambient lighting, ceiling lights and even in the vanity are clear and are not shadows.

4) the organization is the key to learning, children’s room when decorating a child to remember to put the bathroom easy to find areas of the organization, and easy to reach new heights. Vanity sank in open shelves under the bath toy suction cup holders and bins hygiene products to help children to keep the bathroom clean and tidy.

5) Small furniture a little ‘small: Believe it or not is a fitting suitable for babies and small children. There are different estimates for lower mobile is a good lesson for children how to use the toilet. Regardless of the customer, when planning your baby’s bath, to know the options are there for the growing child.

6) to accessorize on a budget: You can spend a fortune to decorate the bathroom of your children also understand that a simple color palette of coordinated accessories that are affordable, can give an overly great! From color-coordinated towels, rugs, shower curtains and hygiene products, operators can combine colors and patterns and decorations.

DECORATING KID’S BATHROOM

DECORATING KID’S BATHROOM

7) The theme of the election: if you are at a loss how to decorate your bathroom kids, consider to choose a theme they have. Derived from animals, sports and entertainment activities to spend time with their favorite cartoon characters and favorite color, the options are endless. If a child is old enough to ask them their opinion on how they would like to decorate your bathroom.

8) Bathroom safety: Make sure the bathrooms have the proper procedures instilled in interior design. Even though a beautiful crystal vanity knobs cabinetry might be nice to see, if not secured properly can be dangerous for children. Make sure all the furniture, harmful chemicals, and decorative elements are not easy for children.

9) Update bathrooms of a teenager: For older children and adolescents want to want to accessorize and color coordinated decor may not be as strong. Instead, opt for temporary accessory that can change depending on your mood teenager! colored towels, rugs can coordinate a work of art hanging on the wall all have their own bathroom needs to make your teen feel comfortable in their space.

10) Keep it simple: It ‘s easy to wrap decorate any room in your home. Remember to have fun when decorating your bathroom children, and to seek inspiration from blogs, interior design magazines and shops to visit in local dishes. Many stores offer “instant bathroom furniture for you. combinations of color coordinated accessories, you can mix and match. No thought required!

Bring together elements to your bathroom decor kids can be fun and easy to use these 10 tips. Consider your child’s age when decorating, as well as a way of life. If you are a busy parent who does not have time to clean the bathroom with lots of toys to keep open the basket and quick cleaning areas. Remember that you are teaching and inspiring children to enjoy swimming and creative learning.

LUXURY DECORATING KID’S BATHROOM

LUXURY DECORATING KID’S BATHROOM

How Much Protein Do You Need Each Day?

One of the most controversial and confusing aspects of nutrition is how much protein people should consume each day.    There are several factors to take into account to get a good answer to this question, and there are potential problems with eating too much protein.   There are also definitely problems with not eating enough protein.  It is also important to consider what type of protein is being consumed.
Height, weight, age, sex and activity level all factor into your protein needs.   Obviously the larger you are the more protein you need to take in to support structural proteins throughout the tissues of the body including the muscles, bone, skin and organs.  In the same way the more active you are the more protein you need to consume.  In addition, protein is used to create enzymes, and enzymes are critically important for all cellular function.
Protein is made up of amino acids and there are essential and non-essential amino acids.    Essential amino acids MUST be consumed because they cannot be made by the body.    Complete proteins contain all the amino acids and come from meats, poultry, fish, eggs and dairy.   While vegetarian proteins are not complete it is not hard to combine different plant protein sources to obtain all the protein the body needs to function.
Other factors which influence how much protein is required is overall caloric/energy status.     If you are eating enough calories to maintain bodyweight or gain bodyweight you require less protein as a percentage of overall calorie intake while those people in caloric deficit require a higher percentage of their overall calorie intake to maintain lean tissue mass (losing lean mass like muscle is usually NOT a good idea so this is important).
How much is too much?

In large amounts and for certain populations (such as those with compromised Kidney Function) excess protein can cause problems.    That being said, for the normal healthy individual, the body can easily and safely process and use a lot of protein.    A portion of the protein you eat is frequently converted to glucose (blood sugar) and if your overall calorie intake is too high you will convert excess protein into fat like ALL unused excess calories.
Another potential problem with too much protein is that high protein intake stimulates the release of mTOR which stands for Mammalian Target of Rapamycin.    mTOR is a key regulatory protein that signals for cell growth through the creation of new proteins. Consider protein building similar to a race car. The larger the engine, the greater potential for speed. Similarly, the more mTOR present in any given cell, the greater potential for more protein construction. And just like the gas pedal fuels the engine, mTOR is a signaling protein, and can be various levels of active (like a pedal’s ability to regulate speed). If a number of different processes all signal for ‘Go’, then the cell builds as much protein as it can, as quickly as it can. So just as a souped-up car takes off rapidly, a muscle cell can signal for tremendous muscle growth very quickly, given the right conditions.   n
For this reason, mTOR is a good thing when you are looking for muscle-building!  However, there is a potential dark-side to mTOR.   Cancerous tumors are designed to grow as fast as possible, and they rely on mTOR signaling to build proteins just like healthy cells.   So too much mTOR could theoretically put people at a higher risk of developing rapid and serious cancers.  In fact, a lot of cancer research is based around slowing down and minimizing mTOR activity in tumor cells (the exact opposite goal of muscle research).
 
This doesn’t necessarily mean that eating more protein for muscle building is going to cause cancer. Numerous other proteins and factors come into play, and some may respond differently in muscle cells than in cancerous cells.
Safe and Adequate Protein Intake

The Institute of Medicine’s protein RDAs are calculated using 0.8 grams of protein per kilogram of body weight. This means an adult who weighs 68 kilograms needs at least 54 grams of protein each day. The RDA for pregnant and nursing women is 71 grams of protein per day.  Keep in mind the RDA is a MINIMUM and does not mean this is ideal!   This also assumes you are sedentary!   So, if you are exercising and trying to build muscle or older and trying to prevent muscle loss higher protein intake is better.  To determine your minimum daily intake, divide your body weight by 2.2 to determine your weight in Kilograms and then multiply by .8 to get your minimum daily protein intake.  
The Academy of Nutrition and Dietetics states that although athletes only need about 1 gram of protein per kilogram of bodyweight to maintain muscle mass, they require 1.4 to 1.8 grams of protein per kilogram to build muscle mass; this is equivalent to about 0.64 to 0.82 grams of protein per pound of body weight each day.

High-quality protein

Our bodies are composed mainly of protein, which (after water) is the most abundant substance in the body. It is the major constituent of our muscles, tissues, skin, hormones, enzymes, antibodies and blood. Even after childhood protein plays a vital role in maintaining and rebuilding our bodies as they cope with the wear and tear of daily life.

Proteins are broken down by the process of digestion into units called amino acids, and the body requires 22 amino acids to form human protein. All but nine can be produced in the body. These nine are known as ‘essential amino acids‘ and have to be provided in the diet. Foods that contain all nine are termed ‘complete proteins’, and they include meat, fish, dairy and soya protein. Fruit, vegetables, grains and pulses are ‘incomplete proteins’ and have to be carefully combined to provide sufficient amino acids in the diet.

Diet Start

Protein is fundamental to rebalancing blood-sugar levels, because it encourages production of the hormone glucagon, which helps the body to release stored glycogen for energy and encourages the burning of fat. Glucagon also helps to balance excess insulin production.

What is Biological Value?

In order to be efficient, protein foods have to be of a high quality and have what is termed a high Biological Value (BV) — this indicates how much of theprotein is retained by the body. Eggs used to be classed as having the highest BY, but micro-filtered whey, whey-peptide blends and lactalbumin (whey- protein concentrate) are even higher. Micro-filtered whey protein used to be a useless by-product of cheese manufacturing. Now it is processed at very lowtemperatures and turned into a protein source with a very high BV that contains all essential and non-essential amino acids.

The only whey to go

To maintain a healthy immune system, blood, skin and muscles, you need to consume protein with a high By. Whey protein (which is derived from milk, see Q&A opposite) is an excellent supplement that has long been used by bodybuilders and athletes alike. It has many uses in a dietary regime:

¨ It encourages the formation of lean muscle mass

¨ It increases glutathione levels, which has great antioxidant and immune- boosting properties

¨ It helps to build healthy new collagen

¨ It provides an invaluable source of protein for vegetarians who are attempting to balance their diets

¨ It is a quick and easy way of having a high-protein meal or snack

¨ It can be incorporated into recipes as a replacement for carbohydrate ingredients.

There are a multitude of whey products on the market — some better than others. Many come in sweet flavours, which are great when making shakes and smoothies, but you need to source natural, unflavoured products if you want to incorporate whey-protein powder into savoury dishes such as soups. These are widely available through health-food stores and on the Web. Just make sure you don’t confuse them with slimmer’s meal-replacement powders, which are usually laden with carbohydrates.

The average serving of whey protein is a 25g (1 oz) scoop, but check on the label to see how much of that scoop comprises protein: the lower the protein content, the higher the carbohydrate content. And beware of `blends’: these are likely to be bulked up with milk and soya derivatives. To get the best out of your whey products, go for the highest protein concentration possible.

Health Benefits of Raw Sapodilla Fruit

HEALTH BENEFITS OF RAW SAPODILLA FRUIT

Health Benefits of Raw Sapodilla Fruit – Sapodilla fruit ripe has frequently we eat and has a sweet and tasty on the tongue, but have you ever you feel the sapodilla fruit still raw and half cooked. Raw sapodilla fruit flavors have mingled bitter sweet and would make for the consume gummy mouth.
But so, sapodilla fruit raw to have efficacy as well as the benefits for the health of the body, because the content of vitamins and anti-oxidants in raw amber is very much beneficial for the body to be away from the body of free radicals that often affects the skin of the body.
For those of you who do not want to consume Raw sapodilla fruit, here we will provide information on the benefits Raw sapodilla fruit for health, hope to be an inspiration and encouragement for you to consume the sapodilla fruit.
Health Benefits of Raw Sapodilla Fruit - 1
Benefits of Raw Fruits for Health
1. Can Overcome Diarrhea Naturally
Benefits of sapodilla fruit raw to health is a drug, diarrhea or loose stools are very powerful. High fiber content in the raw sapodilla fruit is very good in addressing the problem of diarrhea.
How to apply the sapodilla fruit for diarrhea medicine there are two kinds :
Method 1: Take a Raw sapodilla fruit is still fresh and peeled skin, and scar the flesh as well as brewed with warm water to one cup, let stand for 10 minutes and drink the water until they run out, do this way for 2 times a day.
Method 2: Take the sapodilla fruit, half-cooked or Raw, and remove the skin, remove seeds also give a little warm water and also give 2 tablespoons of honey. Drinking Raw sapodilla juice twice a day.
Health Benefits of Raw Sapodilla Fruit - 2
2. Can Treat Dysentery
Benefits of sapodilla fruit raw to the next health is to treat dysentery. Dysentery can be cured by eating raw sapodilla fruit. Take some sapodilla fruit peeled raw and coolies, chew the flesh as he added a little salt on the fruit, eat little by little until the end of sapodilla fruit. Apply 2 times a day until you disappear dysentery and cured.
3. Can Treating Inflammation of the Mouth
Benefits of sapodilla fruit raw to health can also be a natural cure inflammation of the mouth. The trick is to take the sapodilla fruit and splitting it into several parts (after peeling).and sapodilla fruit that has been cut is boiled with 1 cup of water until the water changes color. Wear this sapodilla fruit boiled water to rinse. Do it until the water runs out, do it twice a day until the inflammation of the mouth healed.
Thus some of the benefits of raw sapodilla fruit for a healthy body. Hopefully with this short article can add to our knowledge of traditional medicine wear natural fabrics such as sapodilla fruit. Hopefully this article Health Benefits of Raw Sapodilla Fruit that we share today can be beneficial for you. Thank You.

The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
How Shoes May be Impacting Your Health
Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
The Health Benefits of Grounding
Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
So have some fun, kick your shoes off and get back to nature!
How to get the benefits of Grounding
Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

Getting Started with a Flipped Classroom

Last week, I shared a bit about why I flipped my classroom, and I got some great questions! Today I want to share a bit more about my process and the logistics for flipping. There are lots of ways to do it, and I’m sure there are many other great ideas out there, but this is what has worked for me so far.

1. Plan your lessons 

a) Does it make sense to flip?
You don’t want to flip for the sake of flipping. I always ask myself, “Would this lesson make sense as a flipped lesson?” There are times when some introductory lessons require lots of hands-on scaffolding, and my answer might be “no.” But other times, when the lesson is mostly information and practice, the flipped model absolutely makes sense.

b) What content must be covered?
I go through my math lesson plan, and determine the content that has to be covered in the video. I’m really selective about this because I want my video to be less than 10 minutes long. It’s still a mini-lesson, after all, and if I go any longer than that, my students will tune out. Plus, even though the video may be 10 minutes, the viewing time could be much longer than that if students are pausing the video to write things down or take notes. I try to keep in mind the idea that less is more.

c) Am I the best person to deliver the content?
Usually my answer is “yes,” but not always. I’ve tried to share videos from Khan Academy or LearnZillion in the flipped model, and the kids just didn’t respond as well to those. They’re more likely to tune in when the video is made by their teacher because they have a personal connection. There were a few times when I’ve used someone else’s videos because the production was significantly better in some regard (e.g., it included songs or humor that I couldn’t pull off). But usually, I make the videos myself.

2. Choose your tools

Once I know the content of my lesson, I decide what method I’ll use to produce the video. I choose from a few different options.

a) Screencasts
Sometimes I have a presentation already created in a flipchart for my ActivBoard, and I can just film my voice interacting with my computer screen on that. My favorite tool for screencasting is Screencast-o-matic. It’s very user-friendly and it uses a yellow circle to highlight your mouse so students know where to focus their attention. The free version works well, but for $15/year, you can get lots more editing and uploading options. If you’re interested in screencasting, I would recommend trying out the free version for a while to see if it’s something you’d like.

b) Whiteboard apps
Usually I use whiteboard apps such as Explain Everything or Educreations to make my flipped lessons. I always create the slides in advance so that I don’t waste precious recording time writing out problems or building models that could simply be explained. Then once all of the slides are in place, I’ll record the audio over them. This approach also allows me to work in pieces, too, because I never know when I’m going to get interrupted.

c) Paper slide shows
I’ve blogged about paper slide shows before here. Sometimes the lessons are a bit more hands-on (e.g., using a protractor), and I want to show students some examples. In those instances, I use my DEWEY Document Camera Stand ($120, www.copernicused.com) that turns my iPad into a document camera, and I work and film underneath it. I mostly use this approach with Geometry and Measurement standards, but when I need to do a lot of physical manipulations, the paper slide show works well.

3. Choose your platform

Once I’ve made the video, I need to upload it to a platform for students to view. YouTube is blocked for students at my school, so I use Vimeo instead. I ended up buying a Vimeo Plus subscription last year ($59.95/year or $9.95/month). That gave me much more space for uploads each week (5 GB vs. 500 MB with the free version), and it sped up my upload times, so it was worth it to me when I was crunched to get the videos uploaded after school. I created a channel for some of my videos, and now I’m going back to re-make some or better tag/organize the videos for each unit.

4. Share your content

Once the videos are uploaded on Vimeo, I needed a way to share the links to the videos. When I started, I was posting the links after school each day, but I eventually cut out that step. Now I make one Google Document each term with all of the dates and lesson topics, and then I just copy and paste the links into that document as they’re done. That helps my students because they find the video links in one spot, and I can post the links as they’re available. Here’s an example of what that document looked like one term.

Bonus Tips

1. Make your videos in batches. 
I found it much easier to make all of my videos for the week at once. I could usually tackle this in a couple of hours each week, and it was much less stressful than trying to film every day. I was able to find my rhythm with the process when I batch-produced videos, so that’s how I try to work now. 
2. Start small.
Even if you only make one video each week, you’re still starting to build a library of flipped lessons for future use. I didn’t make as many videos as I’d wanted to last year, but I’m grateful for the ones I already have done because that’s less work I’ll have to do this year.
3. Divide and conquer.
See if someone else on your grade level team would be interested in flipping with you, and then divide up the lessons. Even if you’re not the one teaching the lesson in every video, the students will appreciate it being someone they know. 
4. Get some cheap .mp3 players for student check-out.
Most of my students had Internet access at home to watch the videos, but a couple didn’t. I wrote a grant to buy 10 inexpensive .mp3 players that students could check out to watch the videos. They didn’t require an Internet connection because I saved the videos straight to the hard drives, and since they were cheap .mp3 players (<$20 each), they didn’t have any bells and whistles to make them targets for theft. It was a workable solution for those students who lacked technology access at home. 
Next week, I’ll share more about what my math block looks like under the flipped model. Until then, I’d love to hear from you. What are some tools you use for video production in your class? What challenges do you foresee with a flipped model? Share your thoughts in the comments section.

My trip to New Delhi & Hyderabad Cont……..

I finished the 5th and final OCA for this assignment. The organization assessed is rather a small one but with a track record of substantial outputs. The 3rd organization Indian Institute of Dalit Studies, the 4th organization Yugantra (www.yugantra.org.in) and the 5th organization Institute of Social Studies Trust (www.isst-india.org) had fewer economists as researchers than the 1st and 2nd organizations assessed. This resulted in their research being more focused on the softer aspects of development such as gender, education and inclusion. This meant that they had more interactions with civil society organizations. In a country that is looking to grow at 8% on an annual basis it is good to have this perspective brought in to the policy making process.

I finished the OCA by 4 PM and made my way to he airport to take the flight back to Colombo. To my surprise the flight was on time and we were able to board and are ready for take off on time. I dreamt of sleeping in the plane and getting home at a decent hour and taking a shower and going to sleep so that I can start a new day in Colombo without the effects of travel. This however was not to be. As the air stewardess counted the passengers there was one passenger missing. This meant that the airport staff had to look for this idiot all over the airport. As they could not find him then they decided to offload him; so this meant that they had to offload his baggage as well. As the Delhi airport did not have a bar coding system that meant that all the baggage had to be manually processed to identify the missing passengers’ baggage. This took one and a half hours.

Apparently the passenger was a phantom as he has been checked in (as part of a group) transferring to this flight with his luggage but he was physically not there. I hope they throw the book at the counter staff that did this horrendous mistake. And fix the system to ensure that transfer baggage is not loaded on to the aircraft until the passenger physically checks in. I really thought that this type of kinks in the system would have been sorted out long time ago; apparently not.

So what promised to be a nice ride back to Colombo turned out to be the longest flight between New Delhi and Colombo. The silver lining is of course that we arrived safely!

Have to finish all my reports for the India assignment and apply for my Philippines visa next week as I have to leave for Bangladesh on the 24th of March.

And More: Deals and Sales – 2014 Summer Super Sales

Just to let more people know, in case some didn’t already, there are a lot of great Summer Sales going on right now at various game distribution/retailer websites [think of them as ‘Winter Wonder Sales’ if you are in the Southern Hemisphere]. Here are a couple samples:

Good Old Games, now called GOG.com, have both ongoing sales and Time Limited Deals, with games such as The Hitman Series, Simcity2000, the Baldur’s Gate and Icewind Dale series, the Might & Magic series, the Wing Commander series, Quest For Glory and King’s Quest series, the Rollercoaster Tycoon series, and much more
(Click to see Full Size)

Steam is having it’s Summer Sale, that also has some ongoing deals with some Time Limited Sales, with games such as The Witcher series, Euro Truck Simulator series, the Left 4 Dead series, the Total War series of games, Red Alert 3, Civilization 5, and much more
(Click to see Full Size)
Some of these are Time Limited Deals, meaning that they are only ‘on’ for a few hours, or change after a few hours – so check back there once in a while and see if any games you have been waiting for are on sale – most of these are 80% or 90% off!
[For the most part, they seem to ‘stay’ on sale/remain on sale, but at a slightly higher sale price than within the ‘time limit’ (but are still available at less than regular price)]
I hope you find something you like and See You In The Games!

3 Favorite & Underappreciated Apps

I recently stumbled on an adorable blog called “Thirsty Firsties,” and Kelly, the author, is hosting a linky party about iPad apps.

The rules are to share three apps – one free for classroom use, one paid for classroom use and one favorite app for personal use. She’s also giving away an iTunes gift card as part of the linky, so be sure to check out her blog and join in the fun!

I’ve already shared many of the apps that I love and use in the classroom. See, for example, my list of favorite paid apps and my list of favorite free apps. So today, I’m branching out to share some of the apps that I’ve used and enjoyed this year that I haven’t really talked about before.

Favorite Free App – Spelling City

Vocabulary Spelling City is a great app for teaching students vocabulary or spelling words. It has a variety of engaging games, and it can be used by students at all levels. The app itself is free and has a lot of functionality on its own. If you are a premium subscriber to Spelling City, however, it’s a great complement to the activities you assign your students each week. I had my students doing activities on this app almost daily, and our differentiated weekly spelling tests were done entirely through this app (with the teacher premium subscription).

Favorite Paid App – Marble Math

Marble Math is a fun and challenging math game that addresses a broad range of math computation skills. I’ll confess that I’ve even found myself playing it far longer than a typical “teacher test-drive” would require. The object is to navigate a marble through a maze by solving a variety of problems. It includes fractions, decimals, equations, and negative numbers, so this is probably best for grades 4 and higher. Of all of the apps on our iPads this year, this was the one that students seemed to gravitate toward most in their free time.

Favorite Personal App – Feedly

In the debate between Feedly and BlogLovin, I’m coming down on the side of Feedly for one major reason — I LOVE the iPad app. It’s really easy to flip through and navigate, it rotates, and it doesn’t seem to crash as much as BlogLovin did. In fact, I’ve never had a single problem with it. I don’t tend to comment on blogs as much from my iPad, so I can’t speak to that aspect of comparing the two. Usually if I’m browsing blogs on my iPad, I’ll mark the blogs that I want to comment on and comment through my computer later on. So for the sheer visual appeal of the app for reading blogs, I’m a big fan. This has become one of my favorite go-to apps on my iPad.

Now it’s your turn. What are your three favorite apps? I’d love to hear about them, and be sure to link up with Kelly over at Thirsty Firsties if you get a chance. She’s running the contest for the iTunes gift card through Monday.

And don’t forget to link up with my Teacher Toolbox Trio celebration as well! I can’t wait to discover more awesome classroom resources from TpT!

EUROPEAN STYLED DESIGN IDEAS BATHROOM

EUROPEAN STYLED DESIGN IDEAS BATHROOM

If you are looking for the best images of the sample of European-style bathroom designs, and applications of a modern sauna and gym. Here are sample images of European inspired bathroom design ideas for the home. European influence in a bathroom attached to the right furniture, cabinets bath faucets, vanities, and tile e. As well as their luxurious and spacious sauna Finish Head (European company based in Germany) in a corner, the rest of the spacious bathroom, as the essay should be dedicated to wellness and keep beautiful. Room with a bright red Finnish sauna focuses on physical fitness, also welcomed the formation of large area white cushions and fitness equipment attached to the wall. It makes sense that this is quite large, walk-in glass shower. If you have more time, is set beside a white bath has a sauna, in front of two large floor to ceiling windows.

The second room is here in a Finnish sauna takes gentler approach – offering a job to escape from their mental well-being of the outside world. solarium luxury, you can pull out in front of a soothing fire. Wide bubble bath, shower and steam bath in a wooden soaking dip to give you a variety of bathing options. You can easily live in the house of a modern European hits with a private bathroom attached.

EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM

Solving the Weight Loss Puzzle Part 1

Have you tried to lose weight and failed? If so, you are not alone. 95% of the people who try to lose weight fail to reach their goal, and even less are actually able to maintain their weight loss once they achieve their goal. Obesity and the associated disease diabetes are increasing exponentially in the America despite the many published health warnings about the health risks associated with being overweight.
Why are people unable to lose weight? People are hopelessly confused about the factors controlling bodyweight regulation. This is not surprising when you understand that every single program, book, and guideline developed by various diet “experts”, including our own government, lacks crucial information, contains misinformation, or contains myths. The list of experts and programs seems endless: Dr. Atkins, Dr. Andrew Weil, The Pritikin Diet, Sugar Busters, Protein Power, Dr. Dean Ornish, the Paleo Diet, the Ketogenic Diet, and all the rest. To make matters worse much of the “information” from different experts seems to be completely contradictory.
Take this short True/False quiz to see how much you really understand about controlling your weight and bodyfat levels.
Eating a low fat diet is the key to losing weight
Eating a low carbohydrate diet is the key to losing weight
Most obese people have a slow metabolism
Obesity is a genetic disorder
Some people have a slow metabolism and some people have a fast metabolism
Exercise is not really effective for weight loss
You can eat all you want and lose weight if you do not eat carbohydrates
Low carbohydrate diets are unhealthy
If you eat foods in the right combinations you will lose weight
The key to weight loss is eating healthy not counting calories
Americans are eating more fat than ever before
Americans are eating less fat than ever before

Sound familiar? It should. All these statements have been made by various “experts”. Unfortunately, all but the last one is FALSE. If you want to control bodyweight you have to understand ALL the factors that govern bodyweight regulation and how they apply specifically to you. Stay tuned for part 2 of this article to learn more!

Marathon Training Tips

As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
Determining Starting Point

The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
Training Mix

Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!

Strength and Mobility Training

Running requires a lot more than just cardiovascular and muscular endurance – it requires specific strength and mobility to avoid injury and allow for optimum running technique.  Integrating a run specific strength and mobility program into your training can be a game changer and the program should include:
            A specific dynamic warm-up and foam rolling for areas of tightness and pain
Dynamic Warm-up:  http://www.active.com/running/articles/before-you-run-the-dynamic-warm-up
Foam Rolling:  http://www.runnersworld.com/foam-roller/how-to-use-a-foam-roller
Cool-down with run specific stretches – http://www.runnersworld.com/injury-prevention-recovery/5-post-race-standing-stretches-every-runner-should-do/slide/1
Strength Training Exercises for Running
It is essential to have great core and glute strength to properly stabilize the body during the impact of running to prevent injury.
It is also critical to strengthen all the muscles of the lower body including the hamstrings, calves, and intrinsic muscles of the feet.
Sample Strength Training Program for Runners:  http://www.runnersworld.com/strength-training/10-essential-strength-exercises-for-runners/slide/2
Putting it all together

If preparing for a marathon seems like a lot of work and complicated that is because IT IS!    Like running successful business assessing your starting point and setting a realistic goal with a specific plan of action is key.     Also having a coach is HIGHLY recommended to not only help you create a realistic plan and schedule but to monitor your progress and adjust your workouts and plan accordingly.  

Paperless Mission #8: Conduct and Archive Running Records (iPad)

This is the eighth installment in my Go Paperless! Challenge series. You can see the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #8: Conduct and Archive Running Records 

At least once each six-week term, teachers at my school are supposed to conduct a running record as a guided reading level assessment. We use the Fiction Level Reading Assessments provided by the Teacher’s College Reading and Writing Project, and before my move to paperless, this system was a mess for me. I’d have one binder that was all the student copies of texts, and then I’d have a huge paper pile of blank assessments that I could fill in as I worked with students. Invariably, I’d have a ton of kids reading on level S, for example, and I’d run out of my copies of that assessment, so it was back to the copier to make more. Then I’d have to deal with recording the data and filing them all, and it was a bit of a nightmare.

Paperless rocks. The nightmare is over.

In this tutorial, I’ll share how I’m using Dropbox, GoodReader, and Evernote to conduct running records anytime and anywhere on my iPad. You might want to get a good iPad stylus, too, if you like that “pen in hand” feel.

Step 1. Download all of the running records to a folder on Dropbox.

You will also want to print one student copy of each assessment. I still keep all of those in page protectors in a binder so I can hand one over for the student to read off of, but I never make copies of these. It’s a one-time paper expense that I’m happy to live with.

Step 2. Import the guided reading assessments into your GoodReader app.

Once you’re done saving them to Dropbox, open up GoodReader and connect to DropBox. There’s more information about this in the previous GoodReader tutorial, Mission #6.

Step 3. Choose the appropriate level, and open up the teacher copy in GoodReader.

The first time that you want to annotate the document, you’ll be prompted to “Create an Annotated Copy” or “Save to This File.” You will want to choose “Create an Annotated Copy” so you don’t lose your blank copy. Otherwise, you’ll have to download these files every time you want to use them, and that’s only marginally better than running to the copy room — trust me.

Step 4. Use the annotation tools to mark up student reading as you normally would. 

I won’t lie — the first couple times I did this, it felt a little awkward. You have to remember to save the document if you’re switching between tools or trying to scroll/resize. But it does get better quickly, I promise! The more you use the tools, the more fluid your movements will be. It didn’t take me long to get back to the level of proficiency I had with paper copies, and while my writing is a little messier on the iPad, it definitely gets the job done.

Step 5. Rename the file using the manage files option on the home screen of GoodReader. 

To get back to the home screen, tap the center of your screen — away from any annotations — and it should show you the main menu or “My Documents” up at the top left.

Step 6. Move the renamed running record over to the student’s notebook in Evernote.

To get there, go into Manage Files again, and then select Open in. . . 

You’ll be prompted to flatten annotations. Make sure you choose this or your annotations may be lost. 

Select Evernote, and it will launch your Evernote app. From there, you can move it into the appropriate notebook and type in any notes that you want to remember about the student’s reading.

Extra Credit: Create a simultaneous audio file in Evernote.

This is something that I’ve been playing around with lately, and I think the possibilities for this are amazing. Once I have everything set up so that my student has the student copy of the text and I have the right running record file open in GoodReader, I go into Evernote, open a new note, and start an audio recording using the microphone icon. I tell the student to start, and then I use 4 fingers to swipe quickly from right to left across my iPad. This takes me back to GoodReader (or whatever my last open app was) without having to go through my home screen. When the student finishes, I use the 4-finger swipe in the opposite direction to pause the recording.

In the end, I have an .mp4 audio file of the student reading in addition to my annotations on the running record. This is great because it’s evidence I can use in RTI and parent-teacher conferences, and it also enables me to play back the audio so the student can hear him or herself read — something that rarely happens. We can then talk about patterns I’m noticing and ways to improve reading fluency. It’s a great teaching tool.

Your assignment: Try doing a few running records on your iPad and leave me a comment about how it’s going. I’d love to hear other ideas or suggestions to fine-tune this process, too. I’ve only been doing it for about 6 weeks, so I know there are things that could be improved. Hopefully this is enough information to get you started, though!

Thanks for reading!

Chronic Illnesses and Diet part 3

Visualization and Chronic Disease

To the ten steps of the Body Clock Prescription, I’d suggest adding visualization, another powerful tool for controlling chronic disease. Life consists of moving forward into images. You get to the dry cleaners to pick up your laundry by making a mental picture of the journey and moving forward into that picture. No picture, no laundry. With visualization, you are going to create an inner picture in order to realize your intention, not just in the outside world of the dry cleaner but in the inside world of your immune system.

The first step is to get the knack of meditation so that your mind and body are in a receptive posture for visualization. Let’s assume that you’ve learned to enter a meditative state; riding on the letter M, your mind can enter a new space within your consciousness. From here, you can take one step forward into your imagination and make a picture of what you want to accomplish in your body.

The effectiveness of this approach was initially proven in an experiment conducted with doctors suffering from terminal or advanced cancer. They were shown accurate images of their own cancer cells and of their immune system cells and were asked to create a realistic visualization of the immune system cells attacking the cancer cells. Most of the doctors successfully curbed their cancer — not to the extent of actually curing it, but in most cases there was measurable improvement. Since then, numerous experiments have shown that a less accurate image of the enemy is just as effective.2

Diet Start

About twenty years ago I used to meet one evening every month with a group of other doctors, including Dr. Bernie Siegel, one of the pioneers of visualization. Bernie shared fascinating examples of the kinds of imagery cancer patients chose to promote healing of their illnesses. It seemed important that the image be accurate in its intent; it was disconcerting when patients chose wimpy defensive images that were the imaginary equivalent of trying to beat their cancer with a wet noodle. People who chose aggressive images did better; lions, tigers, sharks, polar bears and knights in shining armor do better work than a little girl gathering up cancer cells into snowballs and throwing them over the fence.

But what’s a good image if you have chronic inflammatory disease? In this case, redness, heat, swelling and pain afflict some part of your body as it reacts to an enemy that the doctor hasn’t been able to discover or that has disappeared from the scene of the crime, leaving your immune system in a perpetual dither. You need a picture that is soothing but not self-defeating by way of quieting your immune reactions to the point of defenselessness. This is where a chemical or an abstract image may be more appropriate. By chemical image, I mean something along the lines of `Let’s put out the fire’. Remember that inflammation is an expression of your body’s fire burning out of control. Whether it is in the skin, the digestive tract, the lungs, the heart, the nose or the eyes or, for that matter, whether or not it is producing palpable heat, some kind of uncontrolled fire is at the bottom of a lot of chronic illness. Parkinson’s disease, for example, has been characterized as a fire in the brain. And the oxidative damage in the chemistry of autistic children constitutes a kind of fiery injury to their RNA and DNA.

If you are going to employ visual imagery to quench the fire, then why not use pictures that are more effective than merely aiming a fire hose or throwing ice water at it? Instead, try mobilizing your body’s powerful natural resources for quenching the inflammation, calling on your body’s clouds to release rainwater on the brush fires of the prairie where the inflammation resides. This could be your intestine if you have colitis, your joints if you have arthritis, your skin if you have dermatitis, your lungs if you have bronchitis and so on. You can even get technical and make your raindrops into vitamin C, vitamin E, beta-carotene and other potent antioxidants. Communication between your meditating-visualizing brain and the resources of your body is more dynamic and more specific then you know.

When Bernie Siegel began talking about people’s responsibility for their own health and healing in the face of serious illnesses such as cancer, people accused him of ‘blaming the victim’ by placing an unreasonable burden of guilt on the sick person. But you can’t really take control of your health without believing that your health is to some extent under your control. Even a person who has been a victim of some catastrophic accident must believe that he or she can exercise control over healing, to at least a small but critical degree, through the expression of intention in prayer or visualization or by the exercise of sheer willpower.

For people with chronic illness, the lines of causation are more ambiguous than they are in an accident. However irrational it may be, all of us feel guilt for things that happen, like the ill-timed flareup of cold sores just before an important public appearance. Feeling guilty won’t get you anywhere, but feeling responsible is the key to taking charge. If you feel like you’re the passive victim of the event, you may miss a chance to engage your body’s resources for healing. Only by feeling that you can take responsibility for your own health will you be able to make the changes that are necessary for regaining that health in the face of chronic illness.

Modern Side Table Lamps Design

If you are an artistic creation lover then you must observation for modern side table lamps. It has a funky look which might make you feel as if you are in around future time or in space. Its abstract and artistic design complements the other paintings and art fashionable your home along with elegance and beauty.

If you’ve a woody environment at your home base decorated in Indian style, then western table lamp design is the best choice for you. The western table lamp comes in a cowboy sort of look. Either there is a cowboy along with a horse of just a horse attached on it. This gives a very classy look to the woodsy type of a house.
Country style reminds you of Country music only but you can also find a country style table lamp also. It’s farm animals alike cows, cocks and others designed on it. It is considered to be the most colorful sort of lamp with natural color and scene.

Oriental lamp shows much about Asian culture in its design. The unique Asian roots can be seen in this type of lamp and would best fit if you have a room filled with Asian souvenirs.
Choosing the perfect table lamp for every room should be your concern as their being complementing the living furniture makes out the atmosphere. There are various styled table lamps for your side tables like western table lamp, modern, urban, Asian and nation but to pick the better for every room needs examination and time. Here is a little guideline for you:
Now you have a selection of lamps from which you can choose the best for your place. Take care of the existing decoration of your home when you choose the side table lamps.

How to Cope with Too Many Snow Days

Ice and Snow, Go Away!

This has been the worst winter since I moved to Atlanta eight years ago. We have six-week terms, and during these last six weeks, we lost two days to extremely cold temperatures (by Southern standards), three additional days because of the “snowpocalypse” that buried Atlanta, and now I’m home again due to Winter Storm “Pax” that will likely shut us down the rest of the week. That’s nearly one-third of our term lost!

Adding to my dilemma, our calendar builds in week-long breaks at the end of each six week term. So we won’t be back in school next week either. It’s a serious wrinkle in my plans.

I talked to my fourth graders about this yesterday, and we worked out a plan so they could continue to work from home during these inclement weather days. It’s a really rainy, dreary day anyway (we’re at the “wintry mix” stage of the storm), so it’s not like they’d be outside sledding today. I also suspect that many parents are welcoming the activities at this stage of the winter!

Here are my suggestions for telecommuting with your class during winter weather.

Building a Virtual Classroom

1. Choose a mix of activities that can be shared with parents. I knew early last night that we’d be off today, so I found some activities that aligned with what we’re studying right now. While many of the activities require computer access, I purposefully included some that do not. For example, we’re building weather instruments out of household items, writing stories, continuing our reading, etc. But we’re also using some online resources.

2. Take advantage of online instructional videos. Two of my favorite free resources are LearnZillion and Khan Academy. I selected videos that align with the math and ELA content we’re working on now.

3. Stay accessible through your Learning Management System. We use Edmodo in our class, and it’s a great tool for turning in assignments and having class discussions. I’m checking in throughout the day to answer students’ questions and participate in the discussion questions I set up there earlier.

4. Take advantage of the resources students have at home. I teach in a 1:1 iPad classroom, so we’re constantly on iPads. There are lots of flash-based games that we can’t run on our iPads, however. I’m fortunate that all of my students have computers at home, so I’m incorporating more of those activities for students to complete. I’m also choosing some really fun and engaging simulation games that we just don’t ever get to in class. Two examples:

Law Craft – For the record, all of the games at iCivics.org are worth checking out. In this particular one, students work to craft a law and take it through the legislative process. They have to build support by making concessions, work out the details through committees, and ultimately get the president to sign it. It teaches a lot about how a bill becomes a law.

Edheads Weather – This aligns with the weather forecasting aspect of our weather unit. Students will work through different weather maps to report the weather and predict future weather events. It’s another great interactive game. I highly recommend the activities at the Edheads website. The only downside is that there are lots of ads, and sometimes pop-ups.

5. Be flexible – I can’t really help students troubleshoot tech issues on their home computers, and I can’t make them do the activities at home. I’m not making any of the activities mandatory, but they’re still available. I’m hoping that with the good mix of opportunities, parents and students will take advantage of the resources I’m offering. But I won’t punish a student who doesn’t. If even a few kids do the activities, it’s better than writing off the weather days as a complete loss.

Preparation is Key
It would be impossible to implement this plan with fourth graders if a lot of our technology norms and routines hadn’t already been established. My students are familiar with my class website, Edmodo, and my expectations. Integrating technology in the classroom makes the transition to our virtual classroom seamless.

How do you handle inclement weather days with your class? Do you have any plans resources to keep students engaged while they’re away from the classroom? I’d love to hear your ideas in the comments!

On an unrelated note, I have been MIA from the blogging world since October. As I’ve mentioned before, I’ve started working on a PhD in addition to teaching full-time and managing my toddler, so I’ve been insanely busy! I have an amazing student teacher this semester, however, so I’m starting to delegate more. I’m hopeful that will free up a little more time and energy so I can get back to blogging and reading all the stuff I’ve missed. Perhaps these weather days will also assist with that!

Mt Trip to Manila, Philippines cont……..

I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

This small apartment is an example of how to make the most of a limited space.This live well in apartments provided with large windows giving good natural light, open spaces and good storage options, including a large sub basement. The lounge is spacious and decorated in bright materials.

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

Upstairs is a beautiful model Dutch prosecutors. Create the mural are welcomed into a room like this.The the kitchen is located between the lobby and hall, and it offers plenty of cooking space. It is an ingenious closet in the hallway. As you can see, the secret of this event to find creative storage.

INTERIOR DESIGN FOR A SMALL APARTMENT

INTERIOR DESIGN FOR A SMALL APARTMENT

INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

The weight question continue…

Take a health check .. .

Before you begin a new dietary regime or exercise programme, check with your doctor that your health status allows you to do so. A health check is vital if:

  • You are suffering from any ongoing health problems
  • You take regular medication
  • You are under 20 or over 65, because children, teenagers and the elderly have specific nutritional needs.

And a reality check …

If you do have a problem with your weight, stop beating yourself up over it. Being fat is not a sin or a criminal offence. It is simply a consequence of careless eating and lifestyle.

Diet Start

Even if you have tried every diet going, this one does not have to be the same. You are going to change your lifestyle and give up a few bad dietary habits. So, unless you have a medical condition that prevents you from losing weight, this approach will help you become slimmer and, more importantly, fitter.

Being overweight can undermine your self-esteem and the way you deal with situations. Losing weight won’t change the fact that you have money worries, an unsupportive partner or hate your job, but when the pounds start to fall away and you begin to feel better about yourself, you will deal with those issues very differently. Your confidence levels will rise and you will have lots more energy, which will help to make all of your problems seem more manageable.

Don’t be negative even before you start. This is not the problem you think it is – it’s the solution.

OBESITY AS A DISEASE – NOT A MORAL FAILING

`Obesity is a heterogeneous disease in which genetic, environmental, psychological, and other factors are involved. It occurs when energy intake exceeds the amount of energy expended over time. Only in a small minority of cases is obesity caused by such illnesses as hypothyroidism or the result of taking medications, such as steroids, that can cause weight gain.’

TAKING A HOLISTIC APPROACH

  • What you weigh is the result of several factors:
  • How much and what kinds of food you eat
  • Whether your lifestyle includes regular physical activity
  • Whether you use food to respond to stress and other situations
  • Your physiological and genetic make-up
  • Your age and health status.

Successful weight management should address all of these factors. That’s the reason for ignoring products that promise quick and easy solutions, or permanent results without permanent changes in lifestyle. Any product that promises that you can lose weight without lowering your calorie intake and/or increasing your physical activity is trading on fantasy and false hope.

My Trip to Male, Maldives, September 2010

The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

View of Water Villas.

View of Maldives by Air (Sea Plane)

Not only did I snorkel but I also went on the “Whale Submarine”

As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

5 Tips to Make Your Paperless Classroom Work

I’m now more than 3/4 of the way through my year of 1:1 iPad work with fourth graders, and while I hoped to have a paperless classroom, the reality has been a bit different. We’re definitely using less paper than we would without iPads, but I can’t pretend that we’re paper-free. As I reflect on this school year, here are five things I would do differently next year to make the paperless transition go even better.

1. Begin the year with a typing boot camp.
The biggest obstacle to the paperless classroom at the beginning of fourth grade is simply that the kids (for the most part) don’t know how to type. Tasks that should have been quick ended up taking 3-4 times the length that I’d anticipated just because the kids were hunting for keys on the keyboard. I think if I’d spent the first term of the year working on typing skills, it would have made a big difference. And on a related note, I’d encourage students to get bluetooth keyboards to use with their iPads (assuming the school won’t invest in those, too).

2. Transition gradually.
When my students start fourth grade, they come from a school that does not have 1:1 iPads. As a result, the technology integration is a big adjustment–for both students and parents. Going fully paperless can be a huge culture shock for the students, and the transition can produce some anxiety. Even with tech-savvy students, there can be a huge learning curve with different apps, and it can quickly get frustrating for some kids–especially the ones who were very comfortable with school as they previously knew it. Start small with a few key apps (e.g., Edmodo, Evernote) and build from there.

3. Try to give options.
Some students are far more comfortable with the iPads than others, and sometimes their lack of comfort can impact their work. With writing, for example, I’ve learned to give students the option of drafting on paper, even though there are lots of mind-mapping and word processing apps they could use for drafting. Usually once they have that first draft on paper, they’re more comfortable typing it in to make revisions and edits. For some of my students, that flexibility makes a huge difference in the amount of writing they can endure. For other students, the iPads boost productivity. Either way, we know that choice is important to students, and this is another important way to differentiate in a 1:1 classroom.

4. Don’t force it.
There are still some contexts where it makes more sense to use paper. Math tests are one example for me. I don’t tend to give students multiple choice tests in math, and I want them to have plenty of space to show their work. Yes, they could do the work on GoodReader with a stylus and turn it in on Edmodo, but that’s not necessarily more efficient for me to grade–especially on a multipage test. Similarly, we’re still using paper and a notebook for our word study work. We use differentiated spelling lists with Words Their Way, and I want students to go through the practice of sorting and recording their words each week. Paper makes sense for that.

5. Stay flexible, and have a backup plan.
At the beginning of the year, we were using our iPads for almost everything (we still are). But then I got sick, and I had to write sub plans. I never know who I’m going to have as a sub, but there are two things that are certain: 1) the sub will never be as comfortable managing a class full of iPads as I am, and 2) students will be more apt to misbehave when they have a sub. As a result, I don’t usually include the iPads in my sub plans unless I know that there will be someone there to enforce my expectations (e.g., someone I co-teach with or my student teacher). If students expect to use the iPads for everything, it can really throw a wrench into the system to take those away, even for a day. Therefore, it’s important to be flexible with using them throughout the year so that students aren’t dependent on them. Sure, they might have a preference, but they need to be able to function without them. That’s also true for times when the power goes out, the internet goes down, or a software glitch makes the iPad temporarily unavailable.

Any tips to add? I’d love to hear your thoughts in the comments section.

This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

April Nitzsche on WBIR Knoxville

April Nitzsche was recently on WBIR as part of their Workout Wednesday. In the segment April demonstrated some exercises you can do at home and in the gym with kettle bells for a good workout. She also mentioned the new Maryville opening location as well as the Bearden location.

You can also view the video here.

Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size
Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size

ReShade by Crosire (reshade.me)
SweetFX by CeeJay.dk (ceejay.dk)
Game Material by Bethesda Game Studios (bgs.bethsoft.com)
Captured by Troy from The Game Tips And More Blog

Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
Right back at ya’, Beth! 
“Thank You” ~ Sincerely, The Game Tips And More Blog

Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

HOME DESIGN FULL OF COLOR AND INSPIRING

It was probably what the designers had in mind when you fill this place with colorful decoration items such as floor cushions, rugs and rustic small packages. Because the white background, these elements stand out and create a pleasant visual contrast. The living room, dining room and kitchen are connected not only physically, but also intelligent design. We love the way the house seems to be decorated according to a fun pattern, which consists of color and youth.

Home Design Full of Color and Inspiring

Home Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

Shelby Dodge Prototype truck that Carroll kept in his private collection

https://www.hemmings.com/blog/2018/04/11/selections-from-carroll-shelbys-personal-car-collection-head-to-auction-in-greenwich/

How To Use The Mouse To The Best Of Your Ability (a.k.a. How To Be A Better ‘First Person Shooter’) [Text-Only]


[Text-Only – This Post is Text-Only Mode, for now. I may return to this posting and add Screenshots or Images at a later time.]

I was browsing around in the Steam Forums [forii?], where I like to try and answer Technical Questions and give Suggestions about Gameplay and Tips – and I recently answered a query someone had about using the Mouse in Fallout 4 (arguably a ‘Shooter’ game for the most part) and how it seemed difficult for them to aim in the game (it is possible to utilize an Automated Aiming capability called V.A.T.S., in Fallout 4 – but the game can also be played ‘in real time’ without it, playing as a First Person Shooter would be played, similar to games like Overwatch, Counter Strike: Global Offensive, Battlefield, and more).

So, I answered with a somewhat-lengthy reply, trying to be helpful and informative, letting them know where to do things like change the Settings of the Mouse and the Sensitivity; really trying to show them that there needs to be a ‘personalization’ of the Mouse Settings, if they wanted to utilize the Mouse, as a gaming tool, to the best of their ability (to “let your ability shine through the Mouse” as it were).

I thought it might be nice to share my answer here too, then – to share with others that may be wondering things like:

“Why am I having so much trouble aiming/killing in <game name>?”

“Why does it seem so hard to kill people <in a Multiplayer game>?”

“How can I improve my gameplay in Multiplayer/Player-Versus-Player?”

…and similar questions.

Thus, here was my reply in the Forum… Perhaps it can be of some use to you:

—–

If I may pop in, as a ‘First Person Shooter’ since Wolfenstein 3D (1992), and having won some Local Tournaments in the past (UT99 and Quake III Arena); you really need to find your own personal ‘mouse sensitivity’…

(I used to do 180’s while running to ‘check my six’ or headshot the player behind me – which they didn’t like of course, heh)

Note that this must be adjusted for every new mouse and potentially every new game. This is the only way to truly have a movement and reaction time/rate in the game that you personally feel comfortable with.


There are a few places you must adjust it:

– in Windows (Settings>Devices>Mouse [for Windows 10])
– in Mouse Software (that disc that comes with the Mouse that everyone ignores, or the manufacturer’s Drivers and associated ‘Software Configurator’ of some type for the mouse from their website), where you can also Keybind different keys or combinations to your Mouse, if it can do so, and set DPI gradations/steps.
– in the Game (Options or Settings)


Again, I cannot helpfully stress this enough; try to do this for each and every game you play – it is amazing in how it can personalize your comfortable movement/scan/hit rate.
It is really possible to ‘hit anything’ in a game, if you make your own personalized changes to all of the above.


Some people like to move their mouse a lot, slowing down the movement into smaller gradations for sniping and tight movements.
Some people like to move their mouse very little, using mostly their fingers and hardly turning their wrist (these types usually switch DPI settings as-they-move, for sniping and tighter movements).

Both are arguable for usage and both can utilize the DPI settings/changes possible on modern mice.
You must find your own movement type and movement rate, set by those three locations previously stated.

Once you set the mouse how you like it – whether you switch DPI settings on-the-fly (to make your character scan slower or faster, switching between scoped and non-scoped, for example) or whether you keep one DPI setting and alter how fast you move the mouse – you will find that you can aim/scan/hit a lot better (and also not get tired as fast).

Tip: Don’t forget to turn off any Mouse Acceleration (The kind that moves your mouse pointer farther on the screen if you move the same amount of space on your desk, only faster)… This only adds to the difficulty in scanning/aiming and makes it harder to build up muscle memory for your mouse (such as, “I move my mouse this far, and my view onscreen moves this far”).

The only recourse, other than doing the above and taking all of the above steps, is V.A.T.S….(at least, to be totally comfortable and ‘reach your full potential’ with the Mouse (wow this is starting to sound like an Infomercial, sorry about that haha))

But, try to have fun exploring it – find “You” in your mouse movements – and have fun learning how “You” play!

—–
Note, Dear Reader, that I am not trying to ‘be pompous’ or ‘brag’ here, with this posting… I merely stated my ‘qualifications’ at the beginning, to show that I learned a lot over time and that I had personally found some effective ways to improve playing, with the Mouse (especially in the past). 
I do not wish to sound like to ‘know everything’ as well – and indeed can learn more – I just wanted to share what I did learn over time and hope that this might help others out, too. If you are an experienced FPS player (‘First Person Shooter gamer’), then you no doubt already know most of these concepts (or have figured them out on your own). 
I should state that I am also nowhere near as good as I once was [being 40 now, alas, age occurs to all..]. Where I once could out-shoot almost anyone, regularly doing 180s-to-instant-headshots (as stated previously), I now regularly get my butt handed to me in games like Overwatch, CS:GO and the Battlefield series of games [although I can still get Top Spot on The Board at times! heh]. 
Still, I wanted to try to help others… and I hope that this posting helps anyone improve their mousing (and killing/winning), if that is what they desire to do. 
I always like helping others and teaching others what I can… “The wiser mind mourns less for what age takes away than what it leaves behind.” ~ William Wordsworth (1770-1850)

SYITG

Fast-Track principles

This is a diet, or a way of eating, that will:

  • Lower insulin levels and stabilize blood-sugar levels
  • Banish food cravings
  • Eliminate energy peaks and troughs, and mood swings

Enhance concentration

  • Re-educate you into a way of eating that will increase your vitality and improve your overall health
  • Help your body to burn fat and normalize your weight.

It is vital that you understand the principles of this diet and follow it responsibly. If you are fundamentally healthy, but insulin-resistant and experiencing any ofthe accompanying symptoms, this plan will help you redress the balance and find a level of carbohydrate intake with which your system can cope. The Fast-Track Plan offers you a kick-start and is aimed at women with a BMI of over 35 and men with a BMI of over 25.

Diet Start

For the period of this plan you base your diet on an approximate ratio of 50 per cent high-quality protein/20 per cent low GI carbohydrates/30 per cent healthy fats. You begin the first two weeks of the diet by restricting your carbohydrate intake to 20g (3/4oz), your protein to 150g (5oz) Biological Value and healthy fats to a minimum of 40g (1 1/2oz). On a very simplistic level this means:

  • 3 cups low GI vegetables per day.
  • 1 portions of protein three times per day and portion twice per day as a
    snack. (A portion of protein is the equivalent to the size of your palm.)
  • Around a half to a whole teaspoon of allowable fats at every meal.

Within 48 hours your body will start to burn its own fat as fuel, as your body switches into benign dietary ketosis.

Ketosis

Being in ketosis means that your body burns fat because it isn’t taking in sufficient glucose to meet your energy needs. Under everyday conditions the carbohydrates that you eat are converted to glucose, which is the body’s primary source of energy. Whenever your carbohydrate intake is limited to a certain range, for a long enough period of time, your body will draw on its fat stores — turning this into a source of fuel called ketones. When you burn a larger amount of fat than is immediately needed for energy, the excess ketones are discarded in the urine.

Dietary ketosis has received a bad press because it is often confused with ketoacidosis, a life-threatening condition most often associated with insulin- deficient, type 1 diabetes.

Benign dietary ketosis, however, is a natural adjustment to the body’s reduced intake of carbohydrates, as the body shifts its primary source of energy from carbohydrates to stored fat. The presence of insulin keeps ketone production in check so that a mild beneficial ketosis is achieved. Blood-sugar levels are stabilized within a normal range and there is no breakdown of healthy muscle tissue, as long as sufficient protein is included in the diet.

Measuring ketosis

On a rapid weight-loss diet you will usually start to burn fat instead of sugar within the first 48 hours. To measure the ketone levels in your urine, buy urinary test strips, called lypolisis strips, from any pharmacy, which will show you if your carbohydrate/insulin balance is at optimum levels for fat burning. You should do this twice a day: before breakfast and before your evening meal. Your levels need to be between trace and small (0.5-1.5 mmol-l).

Caution: if your levels rise to above moderate (4 mmol-l), you are not eating enough and should increase your low GI carbohydrates until the ketones are reduced to between trace and small (0.5-1.5 mmol-l). Always drink plenty of water: at least eight large glasses per day.

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME was recently featured in an article in the Idaho Business Review titled, “New 24-hour Gym Chain to Expand into Idaho”. The article begins with details about the brand’s plans for expansion into the northwest, including Idaho. The article then provides background on how Rick Hascall (WORKOUT ANYTIME Pacific Northwest Area Developer) and Chris Gately (WORKOUT ANYTIME North Florida Area Developer) met while overseas. Rick and Chris talk about the plan to open a club by the end of the year and then use that as a showcase for other franchise prospects. The article closes with more details about the brand, information on the investment, and how WORKOUT ANYTIME is able to grow in large cities.
You can also view the full article here.

WORKOUT ANYTIME on WYFF Greenville

WORKOUT ANYTIME on WYFF Greenville

Jennifer Young and Laura Stokes of WORKOUT ANYTIME Easley were recently featured on two segments on WYFF Greenville. The segments focus on easy holiday workout tips, and Jennifer and Laura do a fantastic job talking about the different services and facilities offered at WORKOUT ANYTIME
View the segments here and here. 

Eat more and more, do you know chemicals in foods blow you appetite?

In a very real sense, everybody has direct reactions to foods. Direct reactions are reactions caused directly to cells by chemicals in foods. Among the most obvious direct reactions are those caused by alcohol. If you drink alcohol, you are almost certain to experience sedative effects, due to the direct effect of alcohol on your brain cells.

Often, people with Asian heritage react quite negatively to alcohol, and the common belief is that they’re allergic to it. Technically, though, they don’t have an allergy; they have a sensitivity — because this is a direct reaction, which doesn’t involve the immune system. I believe that it’s clearer and more sensible to say simply that Asians often have a food reaction to alcohol, since food reactions include both allergies and sensitivities.

Diet Start

Direct reactions, however, can eventually involve the immune system, because sooner or later the immune system is called in to repair the mess that direct food reactions cause. Therefore, the symptoms of direct reactions can feel much like allergies. Because of this, direct food reactions are sometimes called false food allergies.

Alcohol has obvious direct actions, but most direct food reactions are more subtle. Often, direct reactions occur when chemicals in foods bind with the cells that produce histamine; these cells are called mast cells. When this happens, it can cause the release of histamine. The food chemicals that are most likely to do this are lectins, which are most often found in wheat, peanuts, and beans. Another cause can be certain partial proteins, or peptides, that are found in tomatoes, strawberries, shellfish, pork, chocolate, and eggs.

Other foods that often seem to cause direct food reactions are mustard, pineapple, papaya, buckwheat, and sunflower seeds. Ironically, one patient of mine had terrible digestive symptoms, including severe heartburn, and took large amounts of digestive enzymes to help the problem. However, his enzymes were full of papaya, which he later found he was reactive to. When he stopped taking the digestive aids, his digestion improved immeasurably. Moral of the story: don’t trust common knowledge about what’s healthy — trust your own experiences. Everyone is different.

Other foods that sometimes cause direct reactions are those that contain high levels of natural histamines. Histamines are formed in foods that are allowed to age and ferment. Therefore, histamines are often found in aged cheese, sausage, and salami.

Other foods that can cause direct reactions are those that contain the partial proteins tyramine, phenylethylamine, and octopamine. These chemicals, like histamines, can cause blood vessels to expand and contract, which causes tissue swelling. In the head, blood vessel constriction and expansion can cause migraine headaches. That’s why people who get migraines often shun the foods that are high in these partial proteins, such as wine, aged cheese, citrus fruit and yeast.

Another common foodstuff that often causes direct reactions is the artificial sweetener aspartame. Aspartame is mostly composed of the partial protein, or amino acid, called phenylalanine. In some people, it acts directly on brain cells, causing symptoms such as agitation and depression. In other people, it causes blood vessels to contract and expand, triggering migraines. In most people, though, it causes no reaction at all.

Many people also react to MSG, or monosodium glutamate, with headaches, nausea, dizziness, heart palpitations, and confusion. Others react to various additives, including nitrates, sulphites, and artificial food colours.

Another name for direct food reactions is pharmacologic reactions. That’s a good description, because it implies an important point: foods, like drugs, are chemicals. Not all drugs are good for you — and not all foods are, either.

Now let’s look at the last type of food reaction: immune complex reactions. This type of reaction is not well known. But it should be. It can be a killer.

Foods, like drugs, are chemicals. Not all drugs are good for you, and not all foods are, either.

How I Decluttered my Inbox

I try out new apps constantly, but it is rare that I find one that I consider a game-changer — one that revolutionizes how I do something and boosts my productivity.

Meet Mailbox.

Mailbox works with iOS mobile devices (iPhones, iPads) and GMail, and it can handle multiple GMail accounts. The idea is that your email box should always have ZERO messages in it, and it helps you achieve that goal by giving you four options for each message in your inbox.

Big-swipe to the left: Add to list

So many of the emails that I receive are ones that I don’t need to respond to immediately, and Mailbox understands that by allowing you to file messages as low-priority action items. It has three main lists:

  • To Read — great for newsletters and other items you’re interested in reading at some point but not necessarily the second that it arrives in your inbox
  • To Watch — my husband and some friends will sometimes send me YouTube videos that I can’t watch at work — not because they’re NSFW, but because YouTube is categorically blocked at my school. These videos also tend to be low-priority items.
  • To Do — emails of things to add to my “to do” list

It also gives you the option of creating additional lists. I made the “To Buy” list, for example, for items like subscription services that are going to expire sometime soon that I need to renew or for wishlist items that I’m thinking about buying someday. 

Short swipe to the left: Defer

Sometimes I receive messages that I want to deal with, but not at the time I’ve received it. When I’m using my iPhone, for example, I rarely respond to email because I prefer typing on my laptop. Some emails are ones that I’ll look at more closely at night or over the weekend when I have more time. Other emails are ones that I want to deal with at a specific future time or date. Consider these examples:

  • a coupon for a clothing store that I might use but is only valid for a certain week in the future
  • a confirmation email for an upcoming trip or conference

The beauty of the Mailbox app is that you can set the exact date and time when you want that message to reappear in your inbox by letting you “Pick Date.”

The message will reappear in your inbox at the date/time you specify so it can get your attention rather than just getting pushed to the depths of your inbox to be forgotten.

Short swipe to the right: Archive the message
I might want to look for it someday, but it’s not something I need to act on.

Long swipe to the right: Trash the message

Mailbox is a free app in the iTunes store, and in the three weeks that I’ve had it, it has replaced the default Mail app on my iPhone and completely changed the way that I manage email. I’ve gone from having literally 1,000s of emails in my inbox to having ZERO. It’s the first time I’ve ever felt like I’ve been on top of my email situation.

The iPad version just came out this week, and I’m using that a lot, too. It has a larger interface, but all of the same features. Here’s a screenshot of it on my iPad:

You can see that I have one message in my inbox — a coupon that I have to use this weekend if I’m going to use it at all. I’ve deferred 14 messages — some that I’ll reply to on Tuesday, others that I want to deal with once I’m completely done with school on Thursday. I’ve got some lists, but I can also check the archive or the trash in case I accidentally swipe something into the wrong place and want to move it back out.

If you click on a message in your inbox, an image of it will appear on the right so you can decide what to do with it. It’s a very easy-to-use and intuitive app, and now that I have it, I can’t imagine giving it up. It’s a huge asset to my productivity, and my only wish is that I could use this with other email platforms — like my school/work emails — that aren’t GMail accounts.

Have you tried Mailbox yet? I’d love to hear about how you manage email productivity in the comments below.

Hope you’re having a great Memorial Day weekend!

a passenger train in India had a most unusual issue, 22 carriages carrying 1000 people, got disconnected from the engine, and the emergency brakes didn’t work to stop it, it rolled backward 7 miles

http://www.bbc.com/news/av/world-asia-india-43697965/engineless-runaway-train-in-india-gives-passengers-a-scare

Preparing for a Paperless Year!

I am in full-blown pre-planning mode. We officially reported back to school on Thursday, and I’ll have 27 fourth grade students in my classroom on August 1. It’s crazy to think about how fast this summer has gone and how much work is still ahead.

This will be the first year that I will attempt to go paperless from day 1. Last year, we only had 1:1 iPads for the last 6 weeks of school, so it was after we had established many of our routines and procedures for the year. As I prepare for this shift, I’m linking up with the Tune into Technology linky to share my plans for management and organization.

Managing the Students

1. Number the technology
I assign students numbers 1-27 on the first day of school. We use these numbers for everything — mailboxes, book bins, lining up, etc. We’ll also use them for the iPads. Each student will be assigned the iPad corresponding with their number, so they’ll always know which one to use and which slot to put it back in when we clean up.

2. Build Classroom Norms and Routines
We’ll develop some essential agreements about the iPads before we even get them out. I’ll let the students decide on the rules, with a little extra guidance as necessary. The items that we’ll need to touch on will include:

  • how to get the iPad out of the cart
  • moving around the classroom with the iPad
  • using the iPad appropriately (following directions, etc.)
  • putting the iPad away
You can read my previous posts on this here and here.

3. Develop a common vocabulary for the buttons and gestures, and teach some basic actions.

We’ll talk about the different buttons on the iPad and their functions. We’ll also talk about how they can be used together to take screenshots and quickly navigate from one app to the next. For more information about how I do this, check out my TpT freebie (the very first thing I ever made for TpT!).

4. Give time to explore
The first writing assignment my students will have this year will be to write an informational piece (either descriptive or how-to) about an app of their choosing. By giving them this assignment, I’m giving them time to play around with the iPad and explore the available apps while also getting a baseline writing sample. This has the added benefit of cultivating “experts” about the different apps among the students.

We actually start school on a Thursday this year, and I intend to get all of this started during those first two days.

Organizing Myself

As I prepare for my paperless year, there are a few items I’m working on before the students even arrive. This will help me be ready to go on day #1.

1. Create a stack of Evernote notebooks for all of my students.

I’m planning to keep all of my conferring notes, work samples, and other relevant data in Evernote this year. To prepare for that, I’ve created an Evernote notebook for each student, and I have them clustered together in a “stack” so that all of my homeroom students are together.
Since I anticipate using this system for many years, I’m formatting the notebook names as “2013 – Last name, First name.” That way, I won’t get confused when I’m quickly looking for the notebooks for this year’s students as opposed to last year’s. I’ve also created one additional notebook called “2013-2014 Overview.” Listing both years ensures that the notebook will be on top of my stack when they’re sorted alphabetically, and I’ll use this notebook to keep track of notes and documents that pertain to the whole class. 
You can read more about setting up Evernote notebooks in my paperless series.
2. Create a checklist template for my class.

This will also be done in Evernote.

I like to have a checklist of my class roster available whenever I’m collecting forms or tracking important information. I’ll make a blank checklist now, and then I can copy and paste it into future notes as needed. This is a huge time-saver down the road for me.

3. Make sure that my Dropbox folders are set up for distributing student work.


Although there are plenty of learning management systems available, I strongly prefer Dropbox for distributing assignments to students just because it’s so easy on my end. All I had to do was create a folder titled “Student Assignments.”

Once the daily folders are set up within the Student Assignments folder, I can share all of the folders through a link on my class website, and students can easily access everything they’ll need for daily assignments. To read a complete step-by-step tutorial for how to do this, check out my previous post.

Since I set this up at the end of last year, all I needed to do was empty out the assignments I gave to last year’s class so that I can start fresh this year.

4. Create a class on Class Dojo.


Class Dojo is an excellent online classroom management app that I’ll be utilizing more this year. I’ll tell you more about how I’m integrating it with my classroom economy in a future post, but for now, all I need to do is input my student roster and print out home access codes for my students and their parents. Then it will be all set to go.

5. Create a new group on Edmodo and prepare a welcome message.

(Edmodo has totally changed its app icon, btw. Check it out!)

I’ll be using Edmodo to collect student assignments, give quizzes, conduct class discussions, and take polls. I’ll need to have a group code ready to give students for the first day so they can sign up, and I’ll want them to have something to see and do immediately when they log in for the first time.

****
Once I finish these 5 steps, I think I’ll be ready to start the year. I have to admit, I find prepping for a paperless classroom far easier than what I experienced in the past. I’m looking forward to going on this journey with my students this year, and I can’t wait to share all of the learning we’ll have in store for us. It’s going to be a fantastic school year!

Can’t wait to read about how others are organizing and managing technology in their classrooms. Be sure to check out the other posts in the Tune into Technology linky, and have a great week!

Multi-Protocol Label Switching (MPLS)

Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

Internet 2010

When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

Combining Routing and Switching

Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

ROOM DESIGNS FOR TEENAGE GIRL

ROOM DESIGNS FOR TEENAGE GIRL

For today, we have compiled a series of five images that represent the rooms of girls. We try to choose different: we went with serious internal and sober, but also gave him a shot at the famous and very popular pink, orange and red scheme. All rooms are practical, with work spaces, small libraries and shelving systems for books and CDs and fine cabinets specially designed for teenagers. Last but not least, we believe that the mirror is a required element in the bedroom of a girl, although some of the pictures below, you will realize that they have a special status. Even if all design ideas have a particular theme rooms, the furniture is very close to each other to create interiors that are functional and aesthetic. Take a look!

ROOM DESIGNS FOR TEENAGE GIRL
ROOM DESIGNS FOR TEENAGE GIRL
ROOM DESIGNS FOR TEENAGE GIRL
ROOM DESIGNS FOR TEENAGE GIRL

BEAUTIFUL HOME FAMILY DESIGN “VILLA DE CHARME”

Katrine Martensen-Larsen comes this stunning house designed for a family of seven children. We hope that this message will come in handy for those of you looking for new ideas for the nursery too. “Villa de Charme” is located in, Frederiksber Denmark and has been specially designed for a family of seven children. The designer said that this house is “evidence that many children and a hectic lifestyle does not mean you have to compromise on style.” The interior features original decorating ideas and news. The wallpapers are particularly interesting. White is used mainly to define the house and gives it an intimate feeling clean and fresh. bits of color are added here and there, crying the whole design. We really appreciate how serious, sober rooms alternate with play.

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

For furniture, I love the few pieces I have and does not change, but as a blogger we discover daily news, it’s hard not to crack …

Above the living-dining room where Jo Yana chose to paint the main wall in pink – small nod to her favorite designer Karim Rashid … You’ll also notice the suspension ATOMIUM in Kundalini the most beautiful effect!

This room also houses the home theater installation conducted by Dynamic Home Cinema. In front of these gorgeous wooden drops are pregnant Y21.2 Audio Linear …

At the entrance, a picture of Miles Aldridge sets the tone of the apartment, and FIDELIO Philips broadcasts Playlist place … On the side of the dining room, chairs LOUIS GHOST EROS and greet guests.

The main hall lit by the luminaire BLOB M Karim Rashid …

The cuisine is inspired by Parisian apartment signed Périchon we mention above, because the walls and ceiling were painted in gray have to emphasize the white lacquered furniture. Yellow light under the bar and a nice bin Brabantia bring the strand of color …

We love the headboard PARROT signed by photographer Solve Sundsbo …

The workspace of blogger … A reading area with ottoman LEBLON DELIENNE-QUAD and library. An office signed K-DESIGN, and the now famous chair VERTEX signed Karim Rashid.

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

Guided Math Resources

I recently went to a workshop about guided math groups, and I have tons of new ideas that I’ll be sharing in the coming weeks. I couldn’t wait, however, to share a couple of the resources that I’m really excited about.

First, is this book:

Good Questions: Great Ways to Differentiate Mathematics Instruction, Second Edition  is a resource that I was able to start using with my students as soon as I got it. It is full of open-ended questions and parallel tasks that students at any level could access. It’s organized both by grade levels (K-2, 3-5, 6-8) and domain strands (Number and Operations, Geometry, Measurement, Algebra, and Data Analysis and Probability). It also lists which Common Core State Standards each question aligns to.

We were working on line plots (4.MD.4) when the book first arrived. Consider these problems:

You create a line plot that is based on measuring items to the nearest quarter of an inch. You notice that your plot looks a lot like a steep mountain. What might the measurements be and what might you be measuring? Why does it make sense that your plot would look like a steep mountain? (p. 174)

We had a great class discussion about inferences we can make about data based on the shape of a line plot, and students were really creative about what the line plot could be measuring.

There was also a parallel task where students could choose how to represent the data.

The set of data below describes the ages of a group of people at a family party.

32, 30, 5, 2, 1, 62, 58, 28, 26, 25, 24, 2, 4, 39, 16. 

Choice 1: Create a line plot to display the data. 

Choice 2: Create a bar graph to display the data. (p. 186)

Some students felt more comfortable with bar graphs, but they realized that it was harder to figure out intervals and scales for the bar graph vs. a line plot. That yielded a great discussion about how to choose which type of graph to use.

This is a great resource to use for student math journals, and it’s one that I will be going to daily. I can’t recommend this resource enough.

Another math resource that I’m falling in love with for my math workshop and guided math groups comes from the Bridges in Mathematics program. Until attending the workshop, I’d never even heard of this program, but it seems like it’s well-suited for developing math centers and guided math groups. There are some sample tasks available as a free supplement to the the program (to align it with Common Core) at http://catalog.mathlearningcenter.org/free. I’m also planning to purchase their Building Computational Fluency program for $45. I need something more structured and organized for checking students’ multiplication and division fluency in the fall.

Do any of you use the Bridges in Mathematics program in your school? If so, I’d love to hear more about it — I’m really intrigued!

Have a great weekend!

Battlefield Play4Free – PlayTesting The XM8AR LMG (3 Full Rounds – Myanmar, Dalian) Raw Gameplay [Unedited] Gameplay Video

Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens (now called Play4Free Funds) that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a random draw of eight and it will generate an item for you.

The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

I recently won the XM8AR in The Daily Draw (for one day of use) on my Medic and thought I’d try it out and see how it felt and quickly write a post about it [I’ll call these PlayTests]. I am not a gun expert or know a lot about the statistics of the guns, but I will discuss briefly here how the gun actually feels and plays, especially compared to the Medic default, the MG3 Light Machine Gun. I played a few rounds with XM8AR LMG and recorded the first three full rounds. Here they are, shared unedited for you [a ‘Raw Gameplay’ video]:

Recorded with: Bandicam @1080p (HD) using the x264/H264/AVC Codec
Recorded game: Battlefield Play4Free (MMOFPS, a F2P game/Microtransactions)
Recorded levels/maps: Myanmar (Jungle, Assault), Dalian Plant (Rural Industrial Port, Defense then Attack)

[YouTube did something with the Aspect Ratio of this video and I had to use a command in the Tags section to fix it. Let me know if anyone has problems viewing this video properly]

Normally locked until Level 15, the XM8 felt great to use on my Level 10 Medic. It’s ammo box is a little smaller at 60 rounds (vs. the default Medic’s MG3 having 80 rounds), but it never felt ‘cramped for shots’ and didn’t feel like it took too long to reload.

The XM8AR Light Machine Gun is normally locked and cannot be used until your Soldier is Level 15, unless it is bought outright or won in The Daily Draw. Click to see Full Size

The nicest thing about the XM8 was the accuracy. You could really tell you were going from the “Low” rating of the Medic Default MG3 to the “High” rating of the XM8AR.

Comparison of basic stats between the default Medic gun, the MG3, and the XM8AR

Looking down the sights, the three-prong irons of the front sight are quite thin and easy to line up in the view of the rear sight, which is in the form of a circle. There is only a little bit of a pull up and slightly to the right, but the recoil is very small and easy to compensate for once you get used to it. I even felt comfortable shooting from the hip and at a distance because this gun felt so darn accurate compared to the starting weapon for a Medic.

The thin front prongs of the iron sight feel easy to line up for targets farther away and the XM8AR feels like it is very accurate, as can be seen by this Headshot from across a courtyard in Myanmar. Click to see Full Size

An all around great gun, it was fun as hell to use for a day. For only 300 Credits you can try out for a day of play, too. If you have 1250 spare Play4Free Funds you can purchase it permanently. It is a nice accurate gun to run with and may be worth it. Try it out for yourself sometime.

Have fun and See You In The Game!

Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

WORKOUT ANYTIME in the Jacksonville Daily Record

WORKOUT ANYTIME in the Jacksonville Daily Record

WORKOUT ANYTIME was recently featured in the Jacksonville Daily Record. The article talks about the new WORKOUT ANYTIME that opened up Monday, October 6. The article talks about how the Levitt family looks to open 15 WORKOUT ANYTIME locations in the next 5 years in the Jacksonville area. 
View the full article here. 

My Trip to Baticaloa

On my way to Baticaloa, This was taken on the Polonnaruwa Habarana Road today (12/06/2011) @ 2.00 PM. Wow what a Jumbo!

My Trip to Bangladesh June 2011

The assignment in Bangladesh is to evaluate the performance of a department within an organization. The interesting aspect is that the objective / mission of the department is, Organization Development of its other departments as well as partners of the organization. It’s going to be an interesting assignment. This will be a long assignment where I will be staying for 4 weeks in Bangladesh and travel to the north of the country.
The journey here was uneventful and arrived at my hotel tired but happy to be here. I am staying at the Asia Pacific Blossom Hotel; http://www.blossomhotel.net/ this will be my second stay at this hotel. I stayed at this hotel in 2006 during my first assignment in Bangladesh.
The assignment itself got off to a tuff start as the day of the launch of the assignment was a “Strike Day” in Bangladesh and apparently there are more strike days planned in the coming weeks. I am no stranger to Strikes / Harthal in Bangladesh and was in the thick of them when I was here on assignments in 2006 and 2008. At least this time it’s in support of oil and gas committee on the ConocoPhillips deal. The once planed during the week is for political issues; these tend to get violent and can be dangerous.

Franchisee Profile: Marc Flame

Franchisee Profile: Marc Flame

Marc Flame is originally from the Bronx in New York, specifically Riverdale. Growing up, Marc spent every summer on Long Island at his grandmother’s beach house and loves the outdoors. After graduating from JFK Highschool, Marc’s parents moved to South America where Marc learned to speak basic Portuguese. After living in Brazil for a while, Marc moved back to New York where he attended New York University. He graduated in 1981 with a degree in Economics and International Business. Upon graduation, Marc spent much of his time on Wall Street starting his career Bankers Trust Company. Marc eventually became Chief Financial Officer at the banks Technology subsidiary. During Marcs’ tenure he established a successful record of improving operational efficiency and profitability. After fourteen years at BTCo, Marc left and joined Citigroup. Marc spent ten years within the Finance Organization of Citigroup. He then joined the CBS Corporation where he served as CFO of the CBS Technology organization.

After doing some traveling, Marc decided to relocate from Chicago to Atlanta where he began researching franchises to invest in. After much research Marc decided that Workout Anytime was where he wanted to be. Not even three weeks after watching the Workout Anytime franchise video, Marc signed for his first franchise. He now owns the first Workout Anytime located on the South side of Atlanta.
How did you learn about the brand? 
I was researching different franchises and was heavily focused on the fast-food industry when I came across Workout Anytime. I watched the franchise video and was immediately hooked. I knew right then that was what I wanted to invest in. Not even three weeks after seeing the video I met with Randy the entire senior WOAT team. It felt like a family and I signed with Workout Anytime after that meeting.
Why did you choose an opportunity with Workout Anytime? 
I’ve always wanted to own my own business. I worked at a Baskin Robbins in high school and it was some of the best times I’ve ever had. I have always enjoyed doing my own thing which is why I started looking into franchises. I chose Workout Anytime because I am very interested in the Workout Anytime model and I really wanted to do a franchise in a market that really needed it. 
Do you have any development/extension plans? Add units? Timeframe? 
I would like to eventually expand. I do not have a multi-unit sign at the moment, but the goal is to have 3-4 locations within 4-5 years. I am trying to open one every year and a half. Currently, I am working to be the most successful location rather than building out more units. When you talk about franchises people have glass ceiling expectations with what you can achieve with any one location. The Workout Anytime model allows me to push the boundaries, and ensure the opportunity for many members to enjoy all the advantages provided to Workout Anytime members.
Are you involved in any charities or involved in the community in any way? 
I am learning more about the Riverdale area each day and would love to work with charities and get involved with the community once I get to know it better.
Do you have any other interesting hobbies or passions?
I love spending time outdoors. Anything outdoors such as going to the horse stables with my daughter, 
watch my son dirt bike on the trails, and go to the beach as often as possible.

MODERN RESIDENCE LAKE HOUSE DESIGN BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

See all of its 340 square meters, the lake house designed by David Guerra Architecture located in Minas Gerais, Brazil. The very steep terrain, as the permit was built by architect has the opportunity to build a box-shaped structure with overhanging balconies. Residents are a mother and her adult son, so the house must meet their need for privacy and comfort, and entertainment. The landscape box provided by an excellent situation increases the value, while the collection is very personal spaces. Benefits son of a bedroom with a separate entrance, located on the ground floor, next to the playroom. Gourmet kitchen is also located on the lower floor where there are also two additional bedrooms and a service area. Balcony and terrace make the connection to fresh air and beautiful scenery. The first floor features a garage, laundry room, living room and dining room, balcony, a guest room and master bedroom.

This is a nice place to live, providing a platform for entertainment and relaxation for its residents and their guests, do not you think?

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

The link between carbohydrates and insulin resistance

The hormone insulin plays a major role in the metabolism of carbohydratesand their conversion to energy in the body. When you eat carbohydrates, they are converted into glucose in the bloodstream, which triggers the release of insulin. This virtually escorts the glucose to the body’s cells, where it can be used as energy. If there is too much glucose, the insulin turns it into glycogen, which is stored in your muscles and liver ready to be converted back toglucose when it is needed.

However, in the high-refined ‘carob’ world in which we live, we often have too much glucose floating around in the bloodstream, and then insulin converts it to fat. And our body cells may become so flooded with insulin that they cease to be responsive to it, so the pancreas keeps producing more and more insulin in an attempt to get energy to your cells. This is known as ‘insulin resistance‘.

Diet Start

Over a period of time, less and less glucose gets used as energy, and more and more gets laid down as fat. Since insulin also sends messages to the brain to tell you that you are hungry, more and more insulin means increasing cravings for carb-laden food.

The only people who are benefiting from refined foods are:

  • The dentists who have to patch up your decaying teeth
  • The pharmaceutical companies who have to sell you drugs to sort out the symptoms of your ailing immune system and your susceptibility to chronic and degenerative disease
  • The food manufacturers, who are only really interested in profit. If you add to this a high intake of caffeine, alcohol, smoking and a lack of exercise, then you will almost certainly be taking a wobbly walk down the road to ill health.

Is it enough just to cut out refined carbohydrates?

Totally banishing all things processed and adopting a healthier diet based on fresh produce is a definite start, but if you have a weight problem linked to insulin resistance, it may not be enough, because if you are still eating a diet that is too high in the wrong sort of carbohydrates — coupled with not eating enough protein or fat to slow down the rate at which these excessive carbs are hitting your blood-sugar levels — you will still have problems. A low-fat/high-carb diet can give you a nasty shock every time you jump on the scales.

The thing to remember is that all carbohydrates have an effect on your blood sugar, and every gram of carbohydrate consumed is equal to one gram of glucose in your bloodstream. So if you are eating more than your body can burn for energy, or can safely store as glycogen in the liver, the rest will be turned to fat.

The key factor in balancing blood-sugar levels and banishing thesymptoms of insulin resistance is controlling your intake of carbohydrates. In order to do this effectively you need to know which ones have the greatest impact on your blood sugar and which do not.

Initially, this will need a little time and effort on your part as you learn about the different sorts of carbohydrates. You may find that the changes you have to make to your diet are quite drastic, but before long — as you start to feel and look better — you will be amazed at how little you miss the wrong kinds of carbohydrates such as processed and sugary foods. Youwon’t feel the need to pile your plate high with potatoes and pasta, because your newly balanced blood sugar levels won’t be crying out for acarbohydrate fix.

Cut your Protein why no Sugar?

The case against sugar is a complex one. Besides the fact that refined sugar is a totally unnatural substance that has been stripped of its nutritional value—fiber, vitamins, and minerals—apart from the calories it provides, sugar in concentrated form is very hard on the pancreas. The pancreas, which is responsible for the production of insulin and therefore the regulation of blood sugar and energy levels in the body, has adapted through evolution to deal with a steady flow of glucose in small quantities such as those that result from the intake of complex carbohydrates.

One of the biggest beauty cons of all is the idea that if you eat lots of protein your muscles, skin, hair, and nails will grow strong and you will stay young. Like the old-fashioned high protein diet for building up athletic strength, it doesn’t work. The human need for protein has been grossly exaggerated. At the turn of the century, respected opinion held that we need between 120 and 169 grams of protein per day. Then Chittenden showed in human experiments that far better performance and health were possible on fifty grams, a much lower amount. Another scientist named Hindhede set the figure at thirty grams. Then Oomen in Amsterdam and Hipsley in Canberra discovered a population in Australia which develop not only full health, but exceptional muscular structure and performance on a diet of merely 15 to 20 grams of protein per day.

Diet Start

Later in the United States, the American Research Council’s Food and Nutrition Board agreed on a daily requirement of 70 grams for adults. One member of the board, named Sherman, described how this figure was arrived at. The evidence the committee examined indicated that a much lower amount was needed, somewhere around 35 grams, but there was agreement that if so low a figure had been set there would have been a public outcry, so a corresponding “margin of safety” was decided on and the 70-gram figure was published. But because the scientific basis for the figure was nonexistent, the word “recommendation” was chosen instead of “requirement.” Current recommendations for protein intake hover about the 50-gram mark, although there is strong evidence now that we probably need even less.

Your body needs amino acids, the constituents of protein, for its metabolic processes, for growth and the repair and maintenance of body tissue. Proteins are made up of twenty-two different amino acids; all but eight of them your body can manufacture itself. These eight, which have to be taken in through your foods, are referred to as “essential” amino acids.

A large portion of a protein molecule is made up of nitrogen, and one of the important things about taking protein is that it helps keep a good nitrogen balance in the body, so there is as much nitrogen coming into the body as there is leaving it. This balance helps maintain body health and muscle strength, so that you don’t go into what is known as a negative nitrogen balance, when you lose muscle tissue from your body. To keep your nitrogen right, 10 to 15 percent of your total calorie intake should be from protein.

But when a greater percentage than this of your calorie intake comes from protein foods, then your body goes into a negative mineral balance and you start gradually losing precious minerals and trace elements such as zinc, calcium, magnesium, iron, potassium, and chromium from your system. These nutrients, so easily lost from the body, are vital not only to physical health but also to emotional stability and well-being (more about minerals later). Wachmann and Bernstein of the Department of Nutrition at Harvard University investigated the high protein diet and came to the conclusion that the protein-rich (especially the meat-heavy) diet plays a strong role in the genesis of osteoporosis, a softening of the bones, particularly in women after menopause, caused by the loss of minerals. This is probably because of the high protein diet’s tendency to leach valuable minerals (in this case calcium) from the system. And purely from the point of view of physical beauty, many of these lost minerals, such as sulfur, selenium, zinc. magnesium, and calcium, can make the difference between prematurely aging skin caused by a rapid collagen and elastin breakdown, nails that split, or hair in poor condition, and radiant looks glowing with strength and health.

Finally, the breakdown and metabolism of proteins in the body lead to the formation of a number of complex by-products such as urea, nitrogen, and ammonia, which can be toxic. These wastes need to be eliminated. This isn’t always easy, and it puts great strain on the liver and kidneys. This is why, on the well-known high protein reducing diets, you are advised to drink large amounts of water in order to water down these poisons and help excrete them.

MODERN SWEDISH BEDROOM DESIGNS GO SROP

Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

What is the Best Way to Warm-Up?

There is a lot of controversy and conflicting opinions on what you should do for a warm-up for exercise.   One of the reasons is that warm-ups should vary based on the activity you are preparing for and your level of fitness.
As the name implies one of the key goals in warm-up is to literally raise the body temperature and gradually ramp up the cardiovascular system to be prepared for harder efforts.     The length of warm-up should be based on the intensity of the activity.     Low intensity activities like moderate pace walking really require no specific warm-up as you can simply ease into the activity itself as a warm-up.     For activities like competitive athletic events that involve high intensity effort the warm-up should be longer.
In the same way, you have to consider your fitness level because a warm-up for a highly fit individual may be relatively high intensity exercise for a deconditioned person.
For all warm-ups, a 1 – 5-minute period of escalating cardiovascular exercise that raises heart rate and body temperature is advisable.    For high intensity athletic events this should be extended until the athlete breaks a sweat without being fatigued.   
This literal warm-up can be done on a cardiovascular exercise machine or via dynamic bodyweight exercises like squats, lunges, planks, push-ups, etc.    
Once you raise body temperature you can include some dynamic stretching with an emphasis on movements that address key joints and muscles involved in the actual activity you are warming up for.   For example, for tennis warming up the shoulder joint and surrounding muscles is important while for cycling this is less relevant.
 A Proven Warm-up Protocol
Warm-ups for sports participation have been researched and there is one in particular protocol that is proven to reduce injuries by improving muscle strength, balance, and coordination.    This protocol is called the FIFA 11+ Program and involves doing 15 exercises.    For a complete how to guide click here:  https://www.slideshare.net/PedMenCoach/fifa-11-warmup-to-prevent-injuries 

Although this protocol was developed for soccer it can easily be modified to fit just about any competitive sport!

Easy or Hard to Digest

The faster your body can digest a carbohydrate, the higher its dieting index value. There are two major types of digestible polysaccharides or complex carbohydrates: amylose and amylopectin. Both contain many glucose units, but the foods with more amylopectin raise the blood glucose levels much more readily than foods containing more amylose. The branches in amylopectin starch have many surface areas, which make it easier for digestive enzymes to break it down faster.

Diet Start

These easy-to-break-down starches include foods such as most breads, white potatoes, white flour, and snack foods such as pretzels, donuts, and cookies. Most of these foods are also processed or refined carbohydrates, but some natural unprocessed carbohydrates have higher amylopectin levels, including parsnips, russet potatoes, and rutabagas.

Starches that contain more amylose include some whole grains and legumes (lentils, dried peas, and beans) and some of the starchy vegetables such as yams and sweet potatoes. These foods are best for your dieting index weight-loss program.

Dietary Fiber

Most dietary fiber is not digestible. In other words, you might consume the fiber, but there’s a good chance most of it will not be digested such that the nutrients enter your bloodstream. Instead, the fiber is excreted in your stool. There are two major types of fiber: soluble and insoluble. Mostly it is the insoluble fiber that does not get digested, but both types of fiber slow the rate of carbohydrate breakdown into blood glucose. Because of this, it’s great for you to eat lots of dietary fiber. Ideally, you should consume 25 grams or more every day.

Don’t overdo the fiber. But you’d need to consume a virtually unpalatable amount of fiber supplements, such as psyllium husks, to eat too much fiber—such as 4 or 5 tablespoons a day. With too much fiber, you could actually block the absorption of important vitamins, minerals, amino acids, and more. Overeating fiber can, in essence, make you undernourished. (And undernourished doesn’t equate to being thinner.) More than 45 grams of fiber a day is generally too much for most of us.

Quick Tip: Guild Wars 2 – How To Split Stacks Of Items

Just a quick tip for GW2 and those of us who were tying to split stacks of things, only to link them into Chat and ‘shout’ the item’s link to people around us, the entire Map, etc. The way to actually sort things in a more private manner, is to hold down the ALT key and then drag the stack of items to an open slot. A dialog box should come up asking you how you want to split the stack of items (as seen in the example below):

Pressing the Shift key, as most know, will link the item in the chat box, and pressing Control, will link it and shout it out in Chat automagically – which is nice and embarrassing. I’ve seen some random linkages in the Chat Box [of things that aren’t of any interest] so I know it isn’t just me! I hope that this helps someone out and saves them from this atrocious “Faux Pas”…

See You In The Games!

INTERIOR DESIGNERS NEW YORK CITY

INTERIOR DESIGNERS NEW YORK CITY

INTERIOR DESIGNERS NEW YORK CITY

Are you planning an interior designers in New York City? Looking for the lights of New York City? A field of interior design flourishes at New York Medical Interior Design. This is a niche area of ​​design. The focus is that of furnishing medical care institutions must be given to patients not only the service friendly, but friendly design as well. The reason is that hospitals will not only try to repair the physical ailments of patients, but the psychological and spiritual well-being of the patient as well. The population is aging and the need for sensitivity to the design, construction and installation is becoming an important part of the management of age. responsive design provides some relief therapy and improved quality of life for retirees.

Interior design students and professionals are increasingly aware of the medical concept of interiors in New York and other large cities. “Health professionals and designers believe that the concept of environment helps patients physical, mental and emotional wellbeing. What exactly does New York medical interior design involves what are the therapeutic and economic benefits? If medical services who wish to provide a therapeutic context, then what should be the development architecture? INTERIOR DESIGNERS NEW YORK CITY are important points interior designer must consider when creating a design for a medical center. If the installation activity promotion and creativity, so that should be incorporated into the design.

The space must be organized so that patients have the privacy of your health care environment. Planting, lighting and colors have been used effectively to create a pleasant environment must not disrupt or interfere with the routine of the patient. Factors such as codes, regulations, and the money available for the design of medical affairs in New York interior designer, is responsible for knowing and following. There are several quality books on the interior of the doctor. If a medical institution on patients’ and Senior Care then they should definitely consult an interior designer experience in this field. If the search for textbooks in the field not to look over the books written by Jain Malkin. His research on the subject has led to a series of excellent books. Interior designers new york city research has resulted in more and better places for patients and those who work to change the appearance of buildings and health facilities.

BEDROOM DESIGNERS NEW YORK CITY

BEDROOM DESIGNERS NEW YORK CITY

KITCHEN INTERIOR DESIGNERS NEW YORK CITY

KITCHEN INTERIOR DESIGNERS NEW YORK CITY

Why you will lose false fat

Donna didn’t look fat, at least not in the leggings and long sweater she was wearing as she entered my office. Her legs looked slender and fit, and her sweater hid the rest. But she felt fat.

`I’ve got a guy’s type of weight problem,’ she said as she sat down. She was animated and energetic, but obviously frustrated. ‘Women are supposed to collect fat in their hips and thighs — aren’t they? — but mine sticks right here.’ She patted her stomach. When she was sitting, I could see that it bulged, even under the thick sweater. ‘I hardly ever overeat,’ she said, `but since I’ve hit 40, I get no forgiveness from my body. It’s like my metabolism took early retirement. I take two bites and I can feel the fat cells around my waist start to expand. Literally. I pinch my love handles, and they’re thicker before I even get up from the table.’ She looked at me expectantly, as if I might not believe her. ‘My last doctor,’ she said with a sour look, ‘told me there’s no way that food could make me fat that fast. But I can feel it happening.’ Again, she searched my face for reassurance. She had an upbeat personality, but she was almost ready to give up. She ate carefully, exercised hard, and still carried 20 extra pounds.

Diet Start

`It’s not your imagination,’ I said. ‘That feeling of instant weight gain happens to a lot of people. But it’s not fat you’re gaining. It’s fluid retention and bloating, and you’re probably getting it from food reactions. A lot of the swelling and bloating from food reactions occurs directly in and around the gut.

That’s why you feel it in your midsection right away.’

`If it’s not fat,’ she said, ‘why doesn’t it leave as fast as it comes? I look like this almost all the time.’

`Your biochemistry won’t allow it to go away, because your body is trying to protect you. When you eat reactive foods, your body sees them as foreign substances, almost as poisons, and it goes all out to protect you. It can take two to three days to stop reacting to some foods.’

Tut it’s not like I eat junk. I’m an old-time you-are-what you-eat type. I was eating granola before they even had a name for it.’ She smiled, but I could see she felt cheated. For many years, she’d followed all the rules — but the rules had been wrong.

`People can become reactive to healthy foods,’ I said, ‘even granola, if you eat it all the time. Do you eat a lot of non-fat and artificially sweetened foods?’

`Now that my metabolism has slowed down, I’ve got to.’

`I hate to say it, but some of those “lite” foods may be doing you more harm than good. If you’re reactive to a food, it can be virtually calorie-free and still make you gain weight. Even diet soda can cause bloating and swelling.’ She looked surprised. Most people these days are so accustomed to counting calories and fat grams — the quantity of their food — that they forget about the importance of quality.

`I don’t think you’re eating too many calories,’ I said. ‘And I don’t think your age is the real problem. Your metabolism is slowing down just 5 per cent every decade, and that’s not enough to cause what you’re experiencing. I think you’ve just developed some food reactions over a long period of time. When you resolve them, you’ll lost your weight.’

Tut I was tested for allergies and they didn’t find any.’ `Did they explain that not all food reactions are allergies?’ I asked.

`No.’

I wasn’t surprised. Most doctors don’t really understand food reactions. They usually have an all-or-nothing attitude; they think that you either have a classic food allergy, with hives and wheezing, or you have nothing at all.

I gave Donna a brief rundown on how food reactions work and how they cause bloating and swelling. I explained it out of respect for her. Some doctors think it’s acceptable to tell patients what to do, without telling them why, but I object to that approach. If patients are willing to change their lives by taking my advice, they deserve to know exactly why these changes will help.

As I gave all the details to Donna, she listened attentively and took notes. Over the next few weeks, she eliminated her false fat foods — one of which was oats, a primary ingredient in most granola — and dropped about 15 pounds.

Now I’ll give you the details on how food reactions get started. Then we’ll look at how they cause bloating and swelling.

If you’re going to make changes in your life, you deserve to know exactly what’s going on.

I’m sure some of this information will hit home. Often, when I tell patients about food reactions, they say, ‘That’s me you’re describing.’

How to Organize your Summer Reading

Summer is the perfect time for me to make some progress on the massive stack of books that I accumulate throughout the year. You know that stack — and if you’re like me, that stack may have spawned offspring and multiplied into several stacks around the house. And given the number of summer book studies I keep reading about, I know the stack will continue to grow. Like last week, when I saw that Misty was going to read Number Talks, and I had to get the book.

Or this morning, when I read that Beth at Thinking of Teaching and Brenda at Primary Inspired are hosting a summer book study of Building Mathematical Comprehension: Using Literacy Strategies to Make Meaning by Laney Simmons. I want to read that, too!

With all that I’m currently reading, want to read, and have finished reading, I needed a way to keep track of all these awesome books. Then I remembered GoodReads (this is very distinct from the GoodReader app that I’ve blogged about before).

GoodReads is a social media site focused on reading. I first started using it in 2010 after I finished reading The Book Whisperer by Donalyn Miller (if you haven’t read this book, it is a must-read).

She referenced the site in the book, and I used it through my computer for quite a while. Eventually, as I got busier, I started using it less. I recently got an email update about a friend who was using it, however, and it reminded me that I should revisit the site. My how GoodReads has improved since I used it last! First, GoodReads has mobile apps now to help you keep your reading interests up-to-date.

Now, I’m not such a bibliophile that I need to give status updates of what I’m reading non-stop. But these mobile apps have a fabulous feature that I love: a scanner. (Here’s the view of the app from my iPad. The iPhone version is very similar.)

The scanner allows you to scan the barcode on books and then add it to a virtual shelf. Your GoodReads account has 3 default shelves: read, currently reading, and to-read. Shelves are like tags, and you can create your own shelves based on topics or any other organization you’d like. Books can also be housed on multiple shelves at once.

I love using the scan feature to quickly organize the books that I’m reading or plan to read. Given the iPhone app, it’s also a dangerous helpful feature when I go to bookstores and see books that I’d like to read someday. I just scan them in, and it pulls all sorts of data for me about reviews of the book, average rating of the book, page count, etc. For eBooks I’ve purchased that don’t have a scannable barcode, I can also search by title or author.

In addition to using this to manage my summer reading, I expect to use this app more in my classroom library to inventory my collection, identify books that I’ve read or want to read, write recommendations for my students, and so on.

If you decide to give GoodReads a try, feel free to connect with me there. I’d love to connect with other teachers to see what others are reading.

What are some books that you’re planning to read this summer? Any other ideas for ways to use this app? I’d love to hear your ideas in the comments section, and I hope to connect with you on GoodReads!

Happy summer reading!

Does Weighing Yourself Help You to Lose Weight?

Do weight changes translate into fat loss?
On a day to day basis a scale is an extremely poor tool for giving you information on changes in bodyfat levels which are very small.  Daily weight changes are mostly accounted for by four factors:  bowel movements, urination, starch and sugar intake, and blood volume.    Since your blood volume typically does NOT vary that much the other factors are more relevant.
Bowel Movements and Urination vary a lot between different people anywhere from 1.3lbs to 5.7lbs in a single day.    This is one of the reasons to consistently weight yourself after you wake up and go to the bathroom and before you eat or drink much.
However, the biggee when it comes to daily weight fluctuation, is usually glycogen storage levels.    Glycogen is just the storage form of glucose aka blood sugar.    All starch and sugar ultimately end up as glucose, glycogen or fat.     
For example, on the front end of a low carb diet you will show big weight loss which is almost all water because you store glucose/glycogen with water – hence the term carbo “Hydrate”.  Muscle and organs contain the highest levels of water, and this is significant because most of your bodyweight comes from muscles and organs. 
  
So daily changes in weight are NOT a good reflection in changes in bodyfat levels!
Can daily weighing help with long-term weight loss and fat loss?

In order to answer this question let’s review the scientific studies that have looked at this issue.     The recent advent of WIFI scales is allowing much more accurate weight records because prior to that people had to take the time to write down their weight each day.
In a recent WIFI scale study called the Weight Trial here were the results:
Over a six-month period, those who weighed daily lost about 13 lbs more than the control group.
Even those who weighed themselves up to five times each week lost less weight than the daily weighers.
Daily Weighers were more likely to do things like eating less food and watching less television so clearly the weighing helped by changing behaviors!
Although this study did not measure body fat, it is quite likely that the body weight loss did translate into significant fat loss.
For certain groups, daily weighing is a bad idea such as people with eating disorders and other psychological disorders including extremely low self-esteem.     In addition, daily weighing does not work for everyone.   For some people the inevitable plateaus or variations in weight loss can very frustrated and quit the whole process!

So daily weighing may be helpful for you, but it is not perfect and it does not accurately measure changes in bodyfat levels so it is important to do use some method of body composition testing to measure these changes which should be your ultimate goal!

Math Resources for Teachers

It has been a whirlwind couple of weeks! I went on a mini-vacation to a wedding in Nashville, and then I attended a 3-day workshop on The Role of Mathematics in the International Baccalaureate Primary Years Programme. I think this is the summer of math learning for me! I love attending workshops because I almost always leave with new ideas and new resources to explore. Even if you don’t work at an IB school, there were lots of useful resources worth exploring.

(Apologies in advance — this will be a long post!)

Book Resources

A Mathematical Passage: Strategies for Promoting Inquiry in Grades 4-6

This book was featured because of it’s Mathematician’s Bill of Rights on p. 139. The Bill of Rights lists the “rights” that all mathematicians have — things like “solve problems in ways that make sense to me” and “capitalize on mistakes as sites of learning.” I’m definitely interested in reading more from this book. I’ve read other things by David J. Whitin before, and they’ve been great.

Math Matters: Understanding the Math You Teach Grades K-8

I had a chance to browse this book during the workshop, and it looks like a good one for understanding how to approach math conceptually. May not be the most exciting read in the world (would you look at that front cover?!), but it looks like a very useful book if you’re going for an inquiry oriented math classroom.

Good Questions for Math Teaching



This book is great for creating open-ended questions that will really get students thinking about the math involved in problem solving rather than just looking for a specific answer. It uses questioning techniques to develop more sophisticated mathematical thinking, and it has a wealth of information.

Number Talks

I was a little surprised how many teachers at the workshop were already familiar with this book and using it given that I’m usually up on all the latest and greatest math books, but nevertheless, this book had rave reviews. Of all the books that I’m reading this summer, this is the one that I suspect will have the biggest impact on my teaching this August. I’ve really enjoyed reading it, and I have so many ideas about how I will put it into practice this year. If you haven’t gotten it already, I couldn’t recommend it more!

Good Questions: Great Ways to Differentiate Mathematics Instruction



I know I’ve talked about this book before, but we spent a lot of time talking about open questions and parallel tasks at the workshop, so I had to share this book again. I used this book non-stop at the end of the school year, and I loved how it was so perfectly aligned to Common Core in math. It couldn’t be more teacher-friendly.

Online Resources

Visible Thinking Routines

I’ve been introduced to the Visible Thinking Routines from Harvard’s Project Zero before, but it was good to be reminded about them. These are some great activities to prompt student discussions and thinking. One example of this is “OTQ – Observe, Think, Question.” For this activity, students see a picture and spend a few minutes describing what they see/observe. Anything they observe has to be rooted in the picture and not based on inferences. Step 2 is “Think” – what does this make you think about? This is where students can share their inferences and cite evidence in the picture to support why they think that. Finally, students “question” and share what they wonder about based on the picture. I like that these routines slow down student thinking.
Math Class Needs a Makeover

We watched this video in the workshop, and if you’ve never seen it, I highly recommend that you take the 10 minutes to watch Dan Meyer’s TED Talk. In it, he talks about the problems with current approaches to math instruction — largely fueled by larger textbooks and math programs — and how to turn those materials into the types of problems that will challenge your students to become patient problem solvers. I was really inspired by this video, and I hope that you will be, too.

Have a great weekend! I’ll be back to blogging more regularly next week!



Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

Hülsta German Furniture Maker showed some really incredible ideas of life that may be adopted by the style-conscious people who want to give their house a futuristic look and ergonomic. The perfect blend of stylish design with bright pink and black give the whole to create a very refreshing, but a look of the space age. The leather was added to an authentic touch and royal with a minimalist effect adding to the “cool factor”. You can either go all black look metallic or deliberately throwing red and white, while maintaining the class and elegance.

LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

Choose Your Poisons

Food additives vary tremendously in character, from diethylstilbestrol (DES), a synthetic female hormone used to stimulate cattle growth by 15 percent and boost efficiency of feed by 12 percent, to butylated hydroxyanisole (BHA), an antioxidant used to retard or prevent rancidity and flavor deterioration. Then there is glycerol monostearate, an emulsifying agent derived from partial decomposition of fats, which is used in making ice cream, and a wide variety of artificial coloring compounds (there are now thirty-three permitted in Britain, only nineteen in the EEC, ten in the U.S., and four in the U.S.S.R.). Much of our animal food is laced with antibiotics, which are given to retard meat spoilage. They are also used to suppress evidence of disease in animals that are raised in adverse circumstances and are, therefore, prone to illness. They offer no nutritional benefits.

There are three main ways that food additives can be threats to health: they can be carcinogenic (tending to produce cancer), teratogenic (tending to harm the unborn child in the womb), and mutagenic (tending to produce changes in the gene pattern which can be passed on to future generations). One can add the danger of producing genetic changes in the cell material which promote early aging in the body—of particular concern to a woman intent on preserving her youthfulness and good looks.

Diet Start

Government agencies try to regulate the safety of additives in fabricated foods, but judging from the Canadian and American records of failure and the number of permitted additives that have in recent years been suddenly whisked off the market, this is an impossible task. Only 60 percent of the additives used in Britain have been tested at all and even then only for acute toxicity—that is, to determine whether or not they bring immediate adverse reactions to an organism ingesting them—not for teratogenicity nor for possible genetic effects. In fact, there is simply no way for them to be tested. The tests that are done are carried out on animals, not humans, and as the thalidomide tragedy showed, a substance can appear quite safe from teratogenic effects in laboratory animals, yet result in tragic consequences for a human fetus.

But even our methods of testing are outdated. According to Ross Flume Hall, this is because we have all our assumptions wrong. “Both the standards of nutrition by which these foods are judged and the methods of toxicology used to determine their safety are outmoded nineteenth- century models,” he says. Nineteenth-century nutritional theory is based on the notion that all we need from food is protein, carbohydrates, fat, vitamins, and minerals regardless of their source. It is unaware of the interrelationships in natural foods, and of the implications of possible nutrients as yet undiscovered (as with fiber until fifteen years ago) which may be vital for good health. “This limited concept of what constitutes nourishment persists,” says Hall, “even though it has been completely outmoded by the enormous advances in understanding of cell and molecular biology.”

The nineteenth-century toxicology still practiced today assumes that each chemical tested has its own level of toxicity. As long as one’s consumption of that chemical remains below that level, it says, one is safe. It gives no consideration to how different chemicals, tested separately, affect an organism when they are consumed together; nor is any thought given to the cumulative effects of taking a substance regularly over the years.

“What we are beginning to realize,” says Hall, “is that not only can chemicals poison in the short term, they can also cause long-term subtle and undetected changes in personal biology. These changes can show themselves in devastating ways such as cancer and other degenerative diseases and birth defects.”

Food additives are not the only problems with convenience foods either. Their simple nutritional worth is highly questionable. For in addition to their lack of fiber (natural fiber is largely removed in the manufacture of convenience foods), government surveys in Canada and the United States—where 80 percent of food eaten is now factory-produced —show that in spite of the great wealth of these countries and the availability to the public of a vast variety of foods, in general people are not getting enough vitamins and minerals in their diet. This is in large part because so many of the nutrients are lost in processing.

Researchers at Rutgers University experimented with frozen chicken pies to see what vitamin loss, if any, had taken place in the processing. They chose vitamin C levels. To their amazement, researchers found no vitamin C whatever in commercially prepared frozen pies. Then they added vitamin C to the pies and refroze them. When they were reheated two days later, three quarters of the vitamin had disappeared.

A random sampling of 6.5 million elderly people in Britain, in an investigation sponsored by the Ministry of Health, revealed that four out of five were suffering from vitamin deficiencies—a factor that is probably responsible for a large number of illnesses, including many mental disorders suffered by the elderly. According to Dr. Geoffrey Taylor, who has made a long study of the problem in Britain, “There is every reason to believe these deficiencies are present in other age groups of the population as well.”

These are a few of the reasons why the Lifestyle Diet does not include convenience foods. For lasting health and beauty you need the very best complement of nutrients you can get. The McCarrison Society, an organization of doctors and dentists in Britain dedicated to the study of the relationship between nutrition and health, issued a directive that expresses it very well: “Food should be left as close as possible to its natural state. It should be grown on healthy soil. Stored, canned, packaged or precooked food should, whenever possible, be replaced by fresh food. The protective value of a wide range of fresh vegetables, fruits, and low-fat dairy produce is particularly important. Cereal carbohydrates should not be refined and sugar consumption should be at an absolute minimum.” These are the basic principles of the Lifestyle Diet. Now let’s see how to put it all into practice.

DECORATING IDEAS FOR GIRLS BEDROOM GOOD

True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM

DECORATING IDEAS FOR GIRLS BEDROOM

Trip to Hyderabad cont…..

The assignments are over and I am on my way home. The drive from Chilakaluripet to Vijayawada was uneventful; so was the flight back to Hyderabad. I had arranged to be picked up and was met at the airport; the drive back from the Hyderabad airport to my guest house was not usual as the vehicle I traveled did not have air conditioning. So my senses were overloaded by the melting pot that is India; the sights, the sounds and the smells greeted me along the way to my guest house. The only disconcerting factor was the pollution levels. The smoke from the vehicles combined with the dust that they kicked up hung as an orangish grey cloud over the city. There were times that I found it difficult to breathe so had to cover my mouth and nose.

On reaching my guest house I packed all my bags and turned in for the night as I had to get up at 3.30 AM to start my last leg of the journey. Before turning in I had spoken to the driver who was supposed to drive me to the air port in the morning. As a matter of caution I obtained his mobile number for contingencies. He faithfully promised to be there at 4.20 AM to drive me to the airport. The plan was that I had to be at the airport one hour before (Domestic flight from Hyderabad to Chennai) and it took one hour to drive to the airport.)the scheduled time of 6.20 AM

The next morning I was ready by 4.20 and SMSed the driver; then came 4.30 still no driver. I got a bit concerned since we had not planned for any delays. So I went to the security post of the compound and hailed the security. As usual the security guard was huddled up in a corner of the security hut fast asleep. I woke him up and found that he did not speak a word of English. So using sign language and my broken Hindi/Urdu managed to convey the situation to him; finally he got on his bike (Literally) and went and woke the driver who slept in the other corner of this large compound.

I left for the airport around 4.50 AM and made it on time for the flight. The rest of the journey went as scheduled and without incident. I am back at home; and finishing all my reporting before the next assignment.

WTH ? How do both front tires blow up simultaneously?

for the original version, click though on the video below, which will only play on youtube itself

After a review, the team discovered a suspension arm defect led to the entire right front upright collapse, which snapped the wheel tethers and created the dramatic effect

Trip to Hyderabad cont…….

Wow what an assignment! I must say that I have experienced similar assignments in the past in other sectors. However for this sector (development sector) it was a first. As a consultant you have to be on guard all the time when doing an Organization Capacity Assessment (Very similar to a “Due Diligence” in the private sector); if the client wants to mislead you, it can be done quite easily. In my case I was confronted with just that.

Things that should look out for are:

  1. Uniformity in questioners
  2. Having sets of files pre prepared for you (always ask for random files)
  3. When interviewing staff they have uniform answers or say very similar things (always ask to speak to random sample of staff and triangulate your findings; include speaking to other stakeholders as they will be a be useful source of information)
  4. Taking a long time to locate files and other documents when you request for them
  5. Key staff suddenly taking ill and not being available for interviews
  6. Acting “stupid” or not seem to understand what you are requesting for or saying

These things must be handled very diplomatically otherwise you will not be able to complete the assignment. Do not have a “knee jerk” reaction, observe very well and collect enough specific examples so that you have a basis for doubting what is presented to you. At the same time you must see if this deception is systematic or simply put up for this occasion.

If it is systemic you now have a real problem; you will not be able to decipher what is “genuine” and what is “false.” My recommendation is at this point you should seek clarifications from the person who hired you as well as speaking to the decision makers of your client. A temporary halt to the assessment will be in order to do this discretely. Suggest you take prudent steps based on your clients feedback.

However if you feel it is a put up for this particular assessment then your task is easier and it should be handled with the management of the organization that you are assessing. (Don’t forget you still need to advice your client regarding this unexpected turn of events) As this would be difficult situation for some consultants to handle; I suggest a cautious but a very direct approach. This will reduce the space for excuses by the staff. Since it will come as a surprise to them the staff of the organization you are assessing will also not be able to gang up on you to defend themselves. Make sure that you do not engage in a long dragged out discussion, be short and to the point. If handled properly it should bring about normalcy to the process.

If however you do not feel comfortable to take a direct approach you must then document both versions of the process i.e.

  1. The results that are shown by the staff of the organization
  2. Your observations and reservation of those results

This however will not be very useful in the end; as it will not provide the right results to take decisions the assessment was supposed to deliver in the first place. In some rare cases you may need to repeat the assessment to get the right results.

In my case it was the latter and I did confront the staff and the management regarding it. There was an attempt to defend the position but it was not successful; things returned to an acceptable level of normalcy and I was able to complete the assignment.

The Easiest Way to Implement a Classroom Economy

As my life continues to get crazier, I am constantly looking for ways to simplify and improve the things that I do. This year, for example, I decided to merge Class Dojo with my classroom economy, and so far, it’s going very well! Here are some of the tweaks I made to make this merger work.

My Classroom Economy

I’ve been using a classroom economy since I started teaching, and every year, I make a few tweaks. The basic idea is that every student applies for a class job at the beginning of each term (our terms are 6 weeks long). I’ve previously posted about my classroom jobs here. I display the jobs in my classroom so that we’re constantly reminded who is responsible for what. This year, I’ve used a pocket chart for my classroom jobs (sorry for the blurry photo).

I used to give students $100/week as their salary, or about $20 per day. They’d have weekly and monthly expenses, and then they could use any remaining money to purchase items in our class store. The complete program is detailed in my Classroom Economy Megapack on TpT.

I love the system, but I felt like I wasn’t as consistent as I wanted to be in tracking student behaviors to give fines or bonuses, and there were many Friday afternoons when I was so involved in whatever we were working on that day, that I just didn’t leave enough time for them to shop. 
Meanwhile, I was dabbling with Class Dojo, and I wanted to figure out a way to tie that in as well. If you’re not already familiar, Class Dojo is an online behavior management system that allows you to give and take away points from students. You can create your own categories for points, and you can access the class info from any device — laptop, computer, iPad, iPhone, etc. I liked that portability because I always have one of those devices in my hands, and I could give or take away points without really interrupting what I was doing. 
The solution came for me this year when Class Dojo allowed for the creation of weighted point values! Before, you could only give or take away a single point at a time. Now you can create points on a scale of 1-5 and weight particular behaviors accordingly. This is done in the set-up for behaviors. 
1. Go to Edit Class on your class screen and select “Edit students and behaviors.”


2. Select “Behaviors” and either click on one of the exiting behaviors, or the plus symbol to customize the behaviors.


3. Change the icon (optional), name or rename the behavior, and then click the box to access a pull down menu of point values to weight that item.

And that’s it! You can weight both the positive and negative behaviors according to your needs. Here are the settings I have now for my classroom economy.

I basically divided the $100 weekly salary by 10, and scaled everything else back the same way. Students now get 2 points daily for their salary (10 points per week) and bonuses for different behaviors. The only other positive behavior that I’ve weighted more currently is helping others because I’m really trying to encourage that in my classroom. I’m also going to add a +4 for a class compliment because I like when they do a good job with other adults in the building.

For negative behaviors, I deduct more points for breaking rules outside of my classroom and for disrespecting people or materials. I also now deduct their taxes and rent through Class Dojo, and when they shop, I deduct their points in here. I price everything in multiples of 2, but then I found that I wanted a -5 shopping once they had enough points for some of the larger ticket items in our class store. I dislike that it shows up in the “Needs Work” tab, but I don’t think it’s a problem overall. The parents know what is happening from the descriptors, and we just talk about it in class from the stance of making or spending money. It’s the easiest way to deduct some points without resetting the points entirely.

Since transitioning to this modified system 7 weeks ago, my classroom economy has become more accurate and effective in a fraction of the instructional time. Class Dojo has replaced the clip chart that I used to use, and it helps with some of the accounting. I’m still using the bulk of the resources from my Classroom Economy Megapack, however.

If you’re interested in trying out Class Dojo with the rest of my Classroom Economy Megapack, I’ll be offering the product on sale at half price through Tuesday. It is one of my best sellers, and if you’re looking to change up your classroom management routines or enhance your existing classroom economy, I don’t think you’ll be disappointed. I’ve also discounted the rest of my TpT store 20% to celebrate my return to blogging after a busy start to the school year. Those sale prices will go now through Tuesday, so check them out!

Join the Mailing List! 

Did you know that I have a mailing list so that you’ll never have to miss a post? Use the link at the top right of this page (under Never Miss a Post) to subscribe to my mailing list. You’ll get my posts delivered to your inbox, and you’ll also get access to some extra resources that I’ll be offering to my mailing list only. Given that my PhD work has really cut in to my blogging time this past year, the mailing list is the best way to make sure you see my new content. I promise not to spam you or share your contact information ever. 
Have a great week!

First Impressions – Google Play App: “Screen Recorder” by Kimcy929 [App Mini-Review]

This article has been initially posted as Text-Only at this time, to speed up publishing, focusing on a certain issue. I will return to this posting and add more data on Quality and Performance, Screenshots and then eventually Share it on Twitter/Google+/etc… Soon™

[This past Christmas, my father gave me a neat little tablet to play on – Thanks, Dad! I have been enjoying the heck out of it, learning what it does (cough how to use a tablet cough), what applications it can run (I can write a Blog Post laying down!) and of course, what games I can play on it, heh. I hope to give some Tutorials/Walkthroughs and Reviews on Games and Apps from it sometime… Oh wait, here’s one now! haha]

The Google Store page for the app, with the ‘Play’ button removed [I felt it was a bit distracting, making people think there might be a ‘video to play’ here at The Blog], replaced with The Blog’s ‘G’ brevity logo version.
The Google Play logo in the upper-left will be used to denote images that come ‘directly’ from the Google Play website/page for the app for these types of App Reviews/Posts (Unedited other than logos or helpful arrows/etc added).

Google Play App – Screen Recorder by Kimcy929

Straight to it: while this app did in fact ‘record the screen’, it could not record the game sounds themselves (‘internal’ gameplay audio), it only recorded microphone sounds (‘external’ audio outside the device). While this is useful for some, especially Vloggers, I was personally looking for a screen recorder for my tablet that recorded gameplay and the audio from the game, for Tutorials, Walkthroughs, etc.**

Also, an issue arose where ANY video I viewed after installing this app (even videos I had on my device BEFORE installing it) only came up as a black screen, with the message:

“…Video Is Playing On External Display…”





Now, I had not enabled any such option, nor did I connect any External Displays…

I did some research online and found many people running into this issue with various apps and devices (tablets, phones, etc). Looking at the App configuration in the Settings of my tablet for Screen Recorder, I found this app giving itself the ability to ‘draw over other apps’ (which it can do to create on-screen writing, or arrows, which it advertises that it can do on the Google Play Store page for the app).

This is fine and these features are no doubt useful; however, I could no longer view any videos with the built-in Video Player (“complete action using > Video”) – I literally could no longer view any videos I had on my device, at all. [Even with third-party Media Players, such as VLC Media Player, simply viewing any videos was now ‘broken’…]

Video playing of the Video portion of Videos on the Video Player that
plays Videos was like, really broken now

Even after disabling this option that it gave itself without prior warning (found in Settings > Apps > ScreenRecorder > DrawOverOtherApps), all videos still came up with just a black screen and that message – that is, just Disabling the Setting did not ‘undo’ the inability to no longer watch videos in the Video Player. Disabling this setting, then Uninstalling this app, then Restarting the Tablet, fixed the issue [in my case, the only way it was fixed].

While this app does record the screen, allows for microphone use, doesn’t seem to affect gameplay performance very much, and seems to have a decent selection of Resolutions and Bitrates (eg. 1280×720, 8000kbps), also having some additional helpful things like drawing arrows on the screen, etc; it does not record ‘built-in’ gameplay audio – which I personally was looking for** – and it gave itself a power which interfered with normal tablet video viewing afterward… Not only that, but it only recorded a few videos before no longer working, with a message just repeatedly showing up stating, “Unfortunately, Screen Recorder has stopped”.

No changing of Settings (of my tablet or the app itself) was able to remedy this or get past it [the message coming up and no video being recorded]. Reinstalling the app made it work again, but after a few recordings, only that message repeating on the screen was the result, once again. Therefore, considering all of the above [but including the fact that the app must have worked for other people, that is, those not running into this ‘Screen Recorder has stopped’ message problem], this app earned Three Stars at Google Play from me, as of the time of this writing.

Being ‘completely free’ (No Fee and No Ads), and having a nice selection of ‘standards’ like Resolution and Bitrate choices, and having ‘extras’ like being able to draw on the screen; perhaps with some improvements to bugfixing, enhancements to how it handles itself (asking/warning what would happen before utilizing the “Draw Over Other Apps” ability would be helpful to users that might run into a problem with it) and adding the ability to record internal gameplay audio**, Screen Recorder could potentially be a very capable and ‘feature-rich’ screen recording application.

3/5 Stars
★★★☆☆


This app (and a shortened version of the above Review by The Blog (to fit on Google Play’s Review area)) can be found on Google Play, at:

Screen Recorder by Kimcy929
https://play.google.com/store/apps/details?id=com.kimcy929.screenrecorder

[Note: I am not affiliated with Screen Recorder or Kimcy929 in any way, and I have not and will not be compensated by them for writing about them here. I am merely a user of their application and like to help others with helpful information, when I can. The information in this post was obtained on an LG G Pad IV, and therefore might vary slightly from your own experience (Settings, Menus, Performance, Problems, etc) – but I hope that it was still found useful in some way.]

** More on this later… I have recently found out that Google has taken away the ability [temporarily?] to record game output AND game audio at the same time (“internal audio”) in the latest Android versions – save for a small number of possibilities on LG and Samsung devices. But, I’ll cover this at a later time, when I find out more solid details…

My recommendation: The 3-step dietary programme Do what I did, look the results

The dietary plans that follow offer simple, nutritious and delicious recipes on a staged regime that should take you from overweight to optimum weight and enhanced well-being.

The reason many people depend on junk and convenience foods is because they lead such busy lives. Most of the recipes in these plans are quick to prepare, and should be within the capabilities of even the most reluctant cook. There are exceptions: preparing the Chicken Soup will take a couple of hours, but it makes a lot and you can freeze separate portions, ensuring that you can have a nutritious low-carb meal even when the clock is ticking away.

So blitz your cupboards and discard any foodstuffs that don’t fit the bill. The journey to a healthy, lean body begins here.

The Plans

The 3-step programme includes 3 eating plans. The Fast-Track Plan will help you lose weight quickly and give you that all-important boost on a 50 per cent protein/20 per cent carbohydrate/30 per cent fat regime that will initiate benign dietary ketosis. It should last for 7-21 days, after which you are ready to move on to the next stage. Your weight loss should be around 2-5.5kg (4-121b) if you are a woman and 4-7.25kg (8-161b) if you are a man, depending on how long you remain on this plan.

Diet Start

During the Keep on Tracking Plan you increase your levels of low-tomedium GI carbohydrates and move into a 35 per cent protein/35 per cent carbohydrate/30 per cent fat regime. You still monitor ketosis and watch how introducing higher levels of carbohydrates affects your weight loss, which should now even out to 0.25-1 kg (1/2-21b) per week.

The No Backtracking Plan is your eating regime for life. You can gradually introduce fruit and vegetables, grains and pulses from the higher GI ranges, in moderation. It is important to keep an eye on how your body reacts to these and to establish your perfect weight-management level.

If you are a vegetarian, there is plenty of advice on how to adapt the plans and recipes to suit your dietary requirements. Granted, your choice isn’t as varied as that of a non-vegetarian, but don’t use this as an excuse not to give it a go. If you follow the basic guidelines and make simple changes to the recipes where necessary, you should lose weight and eradicate insulin resistance successfully.

FOOD TO THROW OUT

  • White flour and sugar
  • Honey
  • Biscuits
  • Crisps
  • Sweets
  • Sugary drinks
  • White rice, bread, pasta
  • Processed foods high in carbohydrates
  • Ready-made sauces
  • Gravy mixes

Customize the plans to suit your lifestyle and dietary preferences

The suggested menu plans are not set in stone – they are templates to encourage you to eat the right sort and amount of food.

If you wish to change a recipe – because you don’t like lamb and would rather have chicken, say – it really doesn’t matter. Just try to use foods of a similar dietary value. When swapping vegetables and fruit, go for ones in the same GI category; try to exchange meat for meat, or fish for fish, in the same amounts. If you change a recipe from meat to fish, you may need to use slightly more fish to give you the same level of protein. For example, 125g (4oz) of poultry or lean meat should be replaced with 175g (6oz) of fish.

Simplify the recipes

If you are short of time, or like your food a bit plainer, simplify the recipe. If you don’t fancy Baked Tuna with Tomato and Herbs, adapt the ingredients, ensuring that you still have sufficient protein, carbohydrates and healthy fats – have a tuna salad with tomatoes and dark green leaves.

On a budget

If money is short and you find some of the suggested ingredients a little expensive, use some budgetary ingenuity to bring down the cost. Fresh salmon can be replaced with coley or whiting, or even tinned salmon.

Use the suggested meals as inspiration. In order to manage your weight in the future, you will have to experiment and be prepared to adapt.

INCREDIBLE HOME DESIGN WITH NATURAL LIGHT

This 94 square meter apartment has a privileged location on the corner of the building. Looking for an apartment in well appointed with three bedrooms, one next to the park, with open views to the outside and green space overlooking the street, while the kitchen opens onto the courtyard and peaceful atmosphere. In the middle is a spacious hall and in relation to this, a new bathroom. The general plan with large windows on three sides and bright colors fill the room with light. It is difficult to decide which of these rooms, we love the most.

INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

Food Repair Guide: Baking Part 3

Marzipan

It pays to make your own marzipan as the real thing tastes so much better than bought. Since it is only a question of beating together ground almonds, sugar and egg white to moisten, there is nothing to go wrong.

Biscuits

Biscuits are simple to make and homemade biscuits always impress guests.

They have four dangers: being too soft so that they spread into shapeless plops; being too short or having too great a proportion of fat which makes them hopelessly crumbly; being overhandled, like pastry, which makes them tough; and getting overcooked, which they will do at the drop of a hat.

Diet Start

Texture

Since most biscuit mixtures contain butter, they will always become softer when they go in the oven, so, if your mixture is very runny when cold, it will run away altogether once it gets hot. Unless the mixture is being cooked in a restraining tin try to ensure a reasonably firm texture. Apart from anything else, if it is too runny the biscuit will tend to be tough.

Crumbling

If you want to use a very short mixture, mould the dough by hand rather than trying to roll it out, as you will not succeed. Cut the biscuits into fat rather than thin shapes so they have more chance of holding together.

Toughness

Do not handle the biscuits more than necessary to get the ingredients well mixed.

Overcooking

Once the biscuits have gone in the oven, watch them like a hawk. Take one out and cool it to test, as a biscuit, especially a dark coloured one such as chocolate or ginger, will often be cooked long before it looks cooked.

Failures

Biscuits that have fallen apart, spread or generally failed to live up to expectations, can always be broken up and used as decorations, or crumbled and used as biscuit bases (held together with butter or egg white) for dishes such as cheesecakes.

HOUSE OF INCLUSION Koichi Kimura Architects

House of Inclusion” as-is called the firm FORM / Koichi Kimura Architects, is a home to extraordinary volumes built a new residence in Shiga, Japan …
“Every piece of this house has been designed so as to bathe in natural light to enhance the simple beauty from within” confides the Japanese architecture firm.We observe different windows and niches of light placed at strategic locations and atypical of this house of 151.71 m2.
A small patio is flirting with the wall on the outside and the living / dining room of the house.

HOUSE OF INCLUSION Koichi Kimura Architects
MODEL HOUSE OF INCLUSION Koichi Kimura Architects
EXTERIOR HOUSE OF INCLUSION Koichi Kimura Architects
DESIGN HOUSE OF INCLUSION Koichi Kimura Architects
INTERIOR HOUSE OF INCLUSION Koichi Kimura Architects

Superb materials were used for interior decoration, we welcome in particular the sublime and the bedroom floors polished concrete … WE LOVE IT!
The architects of the firm FORM / Koichi Kimura tell us more about this house. This house, Located in a new residential area, is for a 30-something couple. Surrounded By Other House, The Design Goal Was Set Up to block out the Outside world while Avoiding too much closure, as well as “to Provide Rich and sensuous spaces.
First, a small patio and a path connected to it Were Laid Out Between The living / dining room and exterior. They Are Surrounded by a wall That blocks off the line of sight from outside. Planting and lays out are ugly At The patio, so thats the picturesque images of green and water are Viewed From The rooms.
Enclosed by walls create indirect light That softly filling The Entire room, tea house presents scenes sentimental Here and There. The Living Space And The Life Lived There are enveloped by green and light, Creating an affectionate environment.

Free Weekend – Overwatch and Fallout 4 [Notification]

Just a quick notification for those that didn’t know, that this weekend is a Free Weekend for two great games: Overwatch by Blizzard Entertainment and Fallout 4 by Bethesda Softworks.
To commemorate this amazing alignment of the planets that these two behemoths occupy, I created this ‘Mash-Up’ Image Header as a Reminder, which I will release as a Full-Sized Wallpaper, for fans of these two franchises, once it is complete… Soon™

A big fan of both companies’ products, I was so excited about it – but I haven’t had a chance to play yet! So, I’m trying to help out all of you fellow gamers and notify you that these games are Free and Playable all weekend – including being sold at lowered prices – but it’s almost over! Get out there and jump in – and have fun! GOGOGO

See You In The Game!

BEDROOM INSPIRATION DESIGN STYLE AWUTAN

Bedroom Inspiration Design

Bedroom Inspiration series today, I decided to post some new designs that room I found in my daily online surfing. Here are the last 5 new chamber design that come in our bedroom inspiration series, now at number 7 If you want more inspiration room, you can start from here and keep the links in these posts.

Bedroom Inspiration Style

Bedroom Inspiration Modif

Bedroom Inspiration Awutan

Bedroom Inspiration Mantrap

My Free Font, Just For You™: LED SCREEN GTAMBLOG CAPS+ 2.0 (with Download Links)

An awkward name perhaps, for an odd little, simple version of an “LED Screen / Scoreboard Style Capitals Only” font (including Punctuation and Accents!) – but years ago, I contacted the author of a similar-styled font, to ask specifically for Commercial Use of his font, that looked somewhat like this one [I have been using it “Officially” here at The Blog since then – you can see Examples of it all over this site, on the images].

Today, I found Fontstruct, an easy-to-use, free, online Font creation utility – and thought “why don’t I make my own version this font, not only for ‘The Blog’ to use, but for others to possibly use as well?”.
And so, here is an ‘LED Screen’ or ‘Dot Matrix’ style font (also usable as a ‘Pixel font’) – with punctuation and a couple of ‘accents’ – but capitals only, as traditional LED Screens or Scoreboards (“Score Screens”) would have used; made by my hand, Just For You™…

I am distributing it as “LED SCREEN GTAMBLOG CAPS+ 2.0” by ‘Troy from The Game Tips And More Blog’, at various Font sites, such as those below (for Downloading, Updates as I add more and/or am approved by them). [If you prefer, contact me via email and I can also send you the TTF or Zip of the Font, from me, directly]:

  • Fontstruct (where I created the font by hand): 
  • https://fontstruct.com/fontstructions/show/1459839/led-screen-gtamblog-caps-2-0

  • Fontspace: 
  • http://www.fontspace.com/thegametipsandmoreblog/led-screen-gtamblog-caps-20

Feel free to Comment on those sites, or here (Suggestions, Questions, And More) or contact me via e-mail if you have any questions about the font, at:
[email protected]

Usage License: (Creative Commons, Attribution License, 4.0)
You are free to utilize this font for ANY purpose whatsoever, including Commercial Use and Monetization of any kind, Royalty-Free; the only condition being that you mention my name somewhere, anywhere, during use of this font.
If you would like to make a Donation, on behalf of using this font, you may do so via PayPal, using my email ([email protected]), but this is not required at all, to use this font for any purpose you desire.

As some of you may know, I have been playing around with Fonts off and on, creating them for various images/headers/etc here at The Blog over the years, compiling at least 4-5 fonts or so from scratch, with varying levels of completion… I ‘m not sure when I’ll get around to finishing all of them – but for now, I hope this font can perhaps be useful for some quick images, videos, or whatever you may want it for – Enjoy!

Edit:
 I may return and add some images and examples of the font… Soon™
Also, although I have made this font by hand at the Fontstruct website, I always suggest that you Scan any files you download (just in case), with an Anti-Virus utility of some sort – whether it is Windows Defender (built-in to Windows 10, after downloading) or via an online scanner/website, such as VirusTotal.com or similar.

Workout Anytime in Citizen Tribune

Workout Anytime in Citizen Tribune

WORKOUT ANYTIME was recently featured in the Citizen Tribune. The article explains the newest WORKOUT ANYTIME location coming to Morristown, Tennessee this October. It gives background on Steve James and Scott Elliot and how they came about the WORKOUT ANYTIME brand. The article also goes into further detail on the services at the gym and the owners planned community outreach.
You can view the full article here. 

My Trip to New Delhi & Hyderabad

I am in New Delhi doing an assignment which requires me to do an organization capacity assessment of 5 research institutions in India to ascertain their capacity to receive research grants.

The journey was interesting as the flight I took had a group of tourists (religious pilgrimage to Buddhist sites in India) of whom a majority were first time flyers. So it was fascinating to see the excitement in their faces as the flight progressed; from the smallest kid to the old folk (Gray haired men and women who were in their late sixties) started to peer through the windows to steal a glimpse of the geographic features below. I instantly recalled my first flight (which I took to the UK) when I was just a teenager.

I had dreams of sleeping in the flight; however the rest of the passengers were too excited to be quiet. They were talking in loud voices and moving about so much that sleeping was not an option.

I arrived in New Delhi and managed to go through the immigration very fast and managed to get my luggage fast as well. However when I went out of the airport my pick up had not arrived; so after waiting for half an hour I took a prepaid taxi to the hotel. As a seasoned traveler to New Delhi, I advice all travelers to Delhi to take a prepaid taxi and always have the hotel name and address handy. Also have the telephone number of the hotel so that the taxi driver can call (they all have mobiles) the hotel and get directions if he does not know the place exactly. So without too much of looking around the driver found the hotel.

My past experiences with research organizations have been limited to engaging them for research in preparation for various assignments. I am looking forward to this assignment as this is the first time I will be doing work for research organizations.

“Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Happens Again Today! [Updated 2018-03-02 with Answer Image]

It’s the 15th of the month – and it is time for something that I re-re-started up, just last Month – The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

“Can You Guess Where The Screenshot Below Is From?”

(A Game Screenshot Identification Contest)

Having its’ Fifth Edition now, today – February 15th, 2018!

All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

1. Your guess for the game the image is from.
2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
That’s it!
**[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


The first correct answer submitted by a Skillful Identifier/Gamer will receive this month’s contest prize – which is: a gifted game from the Steam online store!

[Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

Can You Guess Where The Screenshot Below Is From – Contest #1
Can You Guess Where The Screenshot Below Is From – Contest #2
Can You Guess Where The Screenshot Below Is From – Contest #3
Can You Guess Where The Screenshot Below Is From – Contest #4

Are you ready? Here then, is the Screenshot image for this month, below:

[As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

After a week has gone by, if there is no correct guess as to what game the Screenshot is from, I will return here and put up a ‘Hint’ image – a larger portion of the Screenshot – to assist in Game Recognition-ing-ism…

Update!

A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the already-slightly-larger-than-normal CONTEST Screenshot for this month’s Contest)! Ready?

Here is the HINT image (with enlarged portion revealed), below:

[Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is still a portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

Update!
It has been two weeks since the Contest began and there have been no correct submissions! Aww….

To end The Mystery, here is the answer for February’s edition of
‘Can You Guess Where The Screenshot Below Is From’ (2018-02):


The Answer for this month’s Contest was: Just Cause 2!
[Captured in 2014, this Screenshot I took was back when I was playing games at 1600×900 – which is a ‘sweet spot’ I personally recommend [by my own testing] for Mid-Range GPUs (VideoCards). This was JC2 being played with a GTS 250, the ‘Black Knight Edition’ from ASUS which I paired at the time with an AMD X2 245, iirc**. Wow, I have been planning this identification game a long time – never getting around to it for a while of course – haha]
Click to see Full Size
Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Sixth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

See You In The Games!

[**Note: I am not affiliated in any way or degree with NVIDIA or AMD, and I have not and will not receive any compensation of any kind, for mentioning them here. I am merely an enthusiastic user of both companies’ products. I have utilized both and will continue to use both in the future ((on a personal note, I find I usually am ‘stairstepping’ with their GPUs, purchasing from one manufacturer, then the next ‘upgrade’ purchasing from the other, heh. I always Suggest to people who ask; to get whichever has Features you like – and only what you can afford at the time – it will be outdated in 3 years or so anyway; Enjoy what you have and be thankful because there are always people who have less!))]

(The Game Tips And More Blog Contest Game #2018-02)

Original Mexican Mazel Mex

  • 2.5 cups cold water
  • 1.25 cups cornmeal
  • Generous dash cayenne pepper and/or cinnamon
  • 2-3 Tbs. corn oil
  • 3 onions, peeled and coarsely chopped
  • 8 large tomatoes, coarsely chopped
  • 1-2 fresh green or jalepeno chilis, peeled and coarsely chopped
  • 1-2 cloves garlic, peeled and minced
  • Diet Start
  • 1 Tbs. fresh cilantro, chopped and torn into leaves
  • 1 Tbs. fresh parsley, chopped

Combine water, cornmeal, and cayenne. Cook, stirring frequently, over medium heat for 5-8 minutes. Pat evenly onto bottom of 8″ x 12″ casserole.

Sauté onions in corn oil until translucent and fairly soft (10‑15 minutes). Add tomatoes, chilis, and garlic, and cook 2-3 minutes. Pour mixture over cornmeal base and bake in 350° oven for 20-25 minutes. To serve, sprinkle with cilantro and parsley.

YIELD: 2 servings.

Although taste is bitter if tomatoes are unpeeled, the peels are an important aid to digestion.

Hazel Enchiladas

  • 6-8 corn tortillas
  • 0.25 cup corn oil
  • 2 recipes Mazel Cheese Mexican
  • 1 recipe cooked Salsa Mazel
  • 1 recipe fresh Salsa Mazel

Dip corn tortillas in hot corn oil, then into cooked salsa. Fill with Mazel Cheese Mexican, and roll into enchiladas. Cover with cooked salsa. Bake at 350° for 15-20 minutes. Serve with fresh salsa.

VARIATION 1 Add I bunch fresh spinach, cooked and chopped, to Mazel Cheese Mexican.

VARIATION 2 Add 1 tablespoon fresh mixed chives and parsley to Mazel Cheese Mexican.

VARIATION 3 Use 1 recipe Mazel Cheese and 11/2-2 cups sour cream rather than 2 recipes Mazel Cheese.

YIELD: 2 servings.

Depending on size of tortillas and how you fill them, you may wind up with a bit of extra filling. If so, add it to the casserole or reserve it for another use. But better too much than too little.

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

After a look at the pictures in this charming crib Scandinavia, we can only guess at the last, this apartment has no space. You’ll probably be surprised to know that in reality, the total area of ​​the house has a room of 44 square meters. Located Vasastan, Stockholm, this bright and comfortable studio seems to have everything: a beautiful modern design, function and a general atmosphere of welcome.

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

According Alvhem Makleri & Interior, it is an opportunity that exudes peace and tranquility. The living room is a bright and social, with the opening of both kitchen and bedroom. Windows dissolves the border between the inside and provides natural light to govern. We are sure that you have already noticed alcove large enough for a king-size bed. This can be a bit flat, but the design approach used to improve inspires only the “oversized” ideas.

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT SCHEME

NYC INTERIOR DESIGN FIRMS STYLE

NYC INTERIOR DESIGN FIRMS

NYC Interior Design Firms Thomas Britt knows how to create a glamorous interior better than anyone, so when he promised to give “a sort of sense Adrian” an austere industrial building, he knew exactly what to do. Like Adrian, the legendary costume designer, knew glamorous is a quality difficult to achieve. To achieve this, Britt sought inspiration from its customers: a couple, both in the international financial world, and their adorable son.

“My goal was to create a smart home NYC Interior Design Firms of the 21st century of a young international couple,” says Britt transform their building generic six-story ceiling in Tribeca in a family home. His plan, executed with Valentino associated Samsonadze was to create the illusion of architecture, where there was none, and stresses the unconventional combinations of colors, luxurious fabrics, mother of pearl and lacquered antiques and modern art (paired collect works of Indian and Pakistani artists, but also pieces of Americans, including Louise Nevelson and Sol LeWitt).

Britt set a young voice in the lobby, the space on two floors, with steel stairs steep. “We needed to warm up to Hall and to make it more attractive,” says Britt, who has cleverly divided into individual zones (soft, floor to ceiling curtains dramatically tied back) in order to reduce its appearance. It has saturated the wall in red paint, then hang it on three “triumphantly scaled” diamond-glass mirrors your own design.

You can also add a touch of light to the room. That no one can find a Louis XVI console painted lobby of a fossil old, put a couple of lamps ‘iceberg’ 1940 FRENCH plaster on it.

A small back room in the rear portion of the first floor is equally joyous. Cozy the pupal stage, the room is dominated by a Diva like gold bed in an alcove and partially hidden by thick curtains turquoise. red pillows on the bed making it pop blue and gold. Small tables inlaid with mother of pearl to add an exotic touch. An Indian dhurries with blue, gold and red pulls together.

As in many houses in the city, the main parts of the population are on the second floor. Britt treatment living room double height, is a huge expense. The palette is crisp set by the booty white curtains, 22 feet high huge red border. A high-level white towers of Murano glass chandelier in a white sofa, chairs and red carpet red and white barrel. “When you’re in this room, do not know what country you are,” said Britt NYC Interior Design Firms. “You can be anywhere. The decor is influenced by all the places I’ve been”.

NYC INTERIOR DESIGN FIRMS
NYC INTERIOR DESIGN FIRMS
NYC INTERIOR DESIGN FIRMS

Paperless Mission #7: Annotating Rubrics with GoodReader (iPad)

This is the seventh post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

  • Mission #1: Gather Your Tools
  • Mission #2: Build Evernote Notebooks
  • Mission #3: Email Notes to Evernote
  • Mission #4: Create Checklists in Evernote
  • Mission #5: Organize Your Files in Dropbox
  • Mission #6: Setting Up GoodReader (iPad)
Also be sure to link up at the Go Paperless! Linky.

Mission #7: Annotating Rubrics with GoodReader (iPad)

I try to give my students high-quality feedback whenever possible, especially on their writing assignments. In the past, it would take me days to grade all of their papers and write hand-write comments on their rubrics. So when I passed those papers and rubrics back to students, it would kill me to see students stuff them into the abyss of their backpacks, or worse — toss them into the recycling bin. I wanted them to take it home and share it with their parents, and I wanted them to be able to refer back to that feedback. Eventually I learned to photocopy the rubrics before I passed them back, but that still wasn’t ideal. It created more paper clutter and one more thing for me to work on organizing.
When I say that GoodReader has become one of my all-time favorite apps, I mean it. I now use GoodReader to fill out rubrics and other student feedback. To start, make sure that you have the rubric saved as .pdf in Dropbox. While GoodReader can read any type of document, it will only annotate a .pdf. Then open up the .pdf of the rubric in GoodReader (see previous tutorial).

Choose the highlighter tool to highlight the appropriate categories on the rubric. The first time that you go to annotate a document, it will ask you if you want to save to this file or create an annotated copy. If it’s a document that I’m only planning to use once or student work, I typically select “Save to this file.” When I’m planning to use the document over and over again, though, I’ll create an annotated copy. That’s what I’d choose when using a rubric to grade student work.

Once I’ve made my selection, I’ll be able to annotate all over the document. Once you’re in the highlighter tool, you can drag your finger over the text that you want to highlight. You can change the color of your highlighter, and you can also delete highlights by tapping on the highlighted area.

At the end of the rubric, I like to type specific comments for my students. To do that, choose the typewriter tool. A little window will pop up for you to type your comments, and then it will save them to the document. If it saves it in the wrong spot, simply tap on the text and a new menu of options will appear.

You can drag and drop the text into the correct space and re-size the text area to get it formatted the way you’d like.

 When you’re done annotating the rubric, tap the center of your screen to see the “My Documents” option.

From there, you’ll want to rename your file. To do this, select “Manage Files,” then tap on the annotated copy of your rubric and select “rename.”

Once you’ve renamed your document, you’ll have some options for moving it. First, I send a copy to the student’s notebook in Evernote. To do this, tap “Manage Files” again, select your newly renamed document, and select “Open In.” A new window will pop up asking how you’ll want to save the file. Select “Flatten annotations” because that will preserve your edits and merge it into the document so that you don’t lose your work.

Once you’ve chosen that, another window will open showing which of your installed programs you can open it in. As you can see, I’ve get several options available. You could also upload it directly to Dropbox if you would like to back up your work there rather than in your student notebook. This might be a good option if you have a folder shared with the student for passing back work.

When I’m ready to hand back the rubric to students, I open it in Edmodo and attach it as a direct message to the individual student. This allows the student and his or her parents to see it. They could also download a copy if they’re using a computer. (I’ve had mixed results with document downloads through Edmodo on the iPad.)

This system has been incredibly helpful for me. It’s easy to manage because I don’t have to keep track of paper or make sure that I’ve made enough copies of the grading rubric before I start grading. Just one more step in the quest to curb paper clutter.

What are some other ways you can imagine using GoodReader in the classroom? I’d love to hear your ideas in the comments section!

Health Benefits of Red Pomegranate

HEALTH BENEFITS OF RED POMEGRANATE

Health Benefits of Red PomegranatePomegranate or pomegranate is a fruit with a red color that turns out to have a lot of nutrient content. Nutrients contained in the fruit is so much especially nutrition for protection of the skin. Some nutritionally beneficial is an antioxidant, anti-inflammatory, and anti-aging.
Health Benefits of Red Pomegranate - 1
Pomegranate Benefits for Beauty
In this modern era, the pomegranate has been processed into a variety of products, both health and beauty. So what are the benefits of the pomegranate to the beauty of your skin? Consider the following tips:

  • Caring for the Skin
Pomegranate turned out very rich in collagen. Collagen is the basic component of the skin that keep skin smooth and soft. Not only rich in collagen, the compounds in pomegranate also helps fibroplats cell growth. Fibroplats are cells that have the task to produce elastin and fibers that are useful to keep the skin to remain smooth and taut. Pomegranates can also stimulate the proliferation of keratinocytes. This process is a process of forming the outermost cells of the skin.

  • Helps Cell Regeneration
If you have freckles or skin rash on the face, it could be signs if your skin starts to break down. If your skin is already starting to show signs of such, better immediately consumes pomegranate. This is because the pomegranate can provide benefits to protect your skin layer and help regenerate the skin in the inner layers of your skin. The content of antioxidants in pomegranates can also help your skin ward off free radicals caused by pollution.

  • Prevent Premature Aging
You want to look to look like a young impressed? It helps you consume pomegranates. This fruit turned out to contain a compound that works to prevent premature aging. You can consume it in juice form or in the form of oil. But you are advised to use oil only because it proved more effective. You can apply pomegranate oil to your entire body after bathing. By applying it regularly, your skin will become firmer and younger looking.

  • Treating Acne
Pomegranates are rich in vitamin C. Vitamin is that it has a function to regulate oil production in the face. To treat acne using pomegranate quite easy. The first pomegranate puree until smooth. Then apply on face masks to be like. Let it dry and then rinse with cold water. By applying to your face with acne, this pomegranate will shrink acne once existing acne scars on your skin. So, want to be free of acne? Use this pomegranate fruit mask on a regular basis.
Health Benefits of Red Pomegranate - 2
  • Moisturize The Skin
Do you have dry skin? If so, you can use pomegranate to moisturize. Pomegranates have very little meat structure. Size is what can cause pomegranate can go into the deepest part of your skin. By logging into your skin, pomegranate will work to moisturize your skin. Not only moisturize the skin only, pomegranate is also able to cope with the irritation of the skin. This is because the pomegranate contains omega 5, which serves to keep your skin moist.

  • Treating Skin Irritation And Skin Burns
Pomegranate it also can be used as an ointment to treat your skin is injured. This is because the pomegranate contains compounds called polyphenols. Besides polyphenols, pomegranates also contain another substance called anti-inflammatory substances. Both of these substances which can be used to treat your skin is exposed to irritation or burns.
How to make it too easy, you can refine pomegranate and afterwards paste it on your skin is injured. Let dry and rinse with cold water slowly so as not to cause pain. Do this treatment until your wounds heal properly. In order to maximize results, you are also advised to drink fruit juice to the wound on your skin really recovered.
Pomegranates for Health Benefits
The benefits of pomegranates not only for beauty, but also for health. Pomegranate is commonly used to treat deficient blood aka anemia. In addition, the fruit is also very well taken by pregnant women.

  • Addressing and Preventing Cancer
Within this pomegranate fruit contains a substance called flavenoids. Flavenoids substance is a kind of high antioxidant substances that are useful to prevent cancer in your body. If someone contracting cancer, it is better to consume the fruit of this one because the fruit is proven to be able to fight cancer cells growing. Some types of cancer that can be treated with pomegranate juice, among others, breast cancer and prostate cancer.

  • Overcoming Anemia
Not only vitamin that is useful to you only beautify. Pomegranate also contains iron. Iron content in pomegranates fact can treat you who have anemia. For those who have anemia, you can create and drank pomegranate juice regularly. Not only serves to treat your anemia alone. Pomegranate was also able to prevent anemia early.

  • Other Benefits of Pomegranate
In addition to the above benefits, there are other benefits of pomegranate, especially for women who are pregnant. If you are pregnant, it is good to consume pomegranate. Facts indicate if the pomegranate can reduce the chances of having a baby born prematurely. In addition to consuming pomegranate baby weight will make you become more standardized. For those of you who are old, pomegranate also has properties that are very good if you consume regularly. This is due to the arrival of pomegranate can prevent Alzheimer’s disease.
There are so many benefits of pomegranate is right, Ranging from health to beauty problems can be overcome with pomegranates. Hopefully Articles Health Benefits of Red Pomegranate that we share today can be beneficial for you. Thank You.

Paperless Mission #11: Getting Started with Edmodo

This is the eleventh installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #11: Get Started with Edmodo

One of the tools that I started using in the classroom this year is Edmodo. If you’re not familiar with it, Edmodo is a learning management system that allows students and teachers to interact online in safe environment. It looks and feels a lot like Facebook but without all of the potential problems Facebook could create — especially for very young users.

1. Create a teacher account and create your group for your class.
Teacher accounts are free, and they’re the first step toward using this in your classroom. Parents and students aren’t able to access Edmodo unless they know the access code that a teacher has given them.

2. Add some content for your students to engage with the first time they use Edmodo. You can ask a question for discussion or take a poll as a good first activity. You’ll want to have something queued to go so that students don’t just start posting randomness. (They may do that anyway at first, but you can at least buy yourself some time to talk about guidelines and procedures for that before they get too carried away.)

3. Invite students by giving them the Group Code. This is unique to your group, and students will need an access code for each group they join with their student account. Joining your group doesn’t give them the power to search for other groups. Similarly, if another teacher at your school is using Edmodo, he or she will also have a Group Code that students can enter and just add the group to their account. It’s pretty easy.

4. Once all of your students have joined the group, lock your group. This will prevent other students from other classes inadvertently joining, and it’s generally a good security measure. You can always unlock the group temporarily later on if you end up getting a new student.

5. Create an assignment. This essentially creates a place for students to turn in their work. Everything that they complete on their iPads gets turned in through the assignments I create on Edmodo. Then I can see which students have turned it in, assign grades, and give feedback. The beauty of this system is that I can grade work as it comes in without worrying about losing something. This is especially helpful on larger assignments where students tend to stagger their completion.

6. Give quizzes. I won’t lie — this is probably one of the most tedious parts about Edmodo from a teaching perspective. You have to manually input all of the questions, and there’s currently not a way for teachers to share their quizzes with one another. But the time you put in on the front end of creating the test is more than made up for on the back end by the immediate grading of the multiple choice, true false, and matching questions. I’ll talk more about Edmodo quizzes in a future post.

7. Set up small groups. You can create multiple small groups within your group, and students can belong to more than one small group. That means that you can have small groups for reading as well as different small groups for research projects in Social Studies, etc.

Preparing Students

My students really did see this as Facebook-lite, so it was important that we created some guidelines as a group. Here are some of the rules we discussed and implemented as a class:
  • Use posts to discuss school-related content only — not to share personal information or “status updates.”
  • Use appropriate school language and grammar, not texting language.
  • Be positive and kind and show good “Netiquette.”
My fabulous media specialist, Sandi at Teacher Technotopia, did a series of lessons with students about “Netiquette” prior to this, which helped a lot. I also moderated the conversations a lot at the beginning. As the teacher, you can delete things that other students post and you can send that student a direct message to let them know that you deleted their post and why you did so. That helped with my class tremendously.  
As a side-note, one of the things I like about Edmodo is that you can send your students direct messages, and they can send you messages, too, but they can’t send direct messages to each other. Anything they post is either public within the group or for the teacher-only. This eliminated some of my concerns about possible cyber-bullying.

How I Used This in My Classroom

Once we got going with Edmodo, I used it constantly. Virtually every test (except math) was done through Edmodo. It was also great for collecting student work, taking polls, and facilitating class discussions. For example, when we were deciding what our class team name would be for field day, I was able to relegate that entire conversation to Edmodo rather than take up valuable class time on it. I also love that students can access Edmodo from any computer or mobile device, so they could keep going on assignments even if they couldn’t take their iPads home. It’s not a perfect platform, but it was really helpful in my move toward a paperless classroom.

Do you use Edmodo in your classroom? I’d love to hear your thoughts about it in the comments section!

Low-carb lifestyle guidelines

By now you should have a pretty clear idea of what you have to do to improve your diet and, with it, your entire lifestyle.

The general principles

Cut out all unhealthy refined carbohydrates.

  • Curb your intake of high GI carbohydrates and focus on those from the low—medium GI range.
  • Eat most of your fruit and vegetables raw to ensure a good level of phytonutrients and fibre.
  • Eat more high-quality protein — organic if at all possible.
  • Increase your intake of healthy omega-3 fatty acids by eating more oily fish, and use only natural unrefined oils in your cooking.
  • Cut out tea, coffee, concentrated fruit juices and alcohol, and banish soft drinks of any kind, but drink at least eight glasses of water per day.
  • Incorporate 30-45 minutes of aerobic exercise at least three times in to your weekly routine, and carry out resistance training at least three times per week.

Diet Start

DIETARY MYTHS

Myth: skipping meals is a good way to lose weight.

Fact: your body needs a regular supply of nutrients each day in order to work properly. If you skip meals, you will be more likely to make up for it by snacking or eating more at the next meal. Studies show that people who skip breakfast tend to be heavier than those who eat a nutritious breakfast. A healthier way to lose weight is to eat many small meals throughout the day.

Myth: eating after 8 pm causes weight gain

Fact: it doesn’t matter at what time of day you eat; if you are eating too much of the wrong type of food and not getting any exercise, that will make you fat.

Are you all fired up?

You should be, because you are going to get back in control. You now know what you are doing, understand your body and should look on this as an important project that will bring untold benefits. Now that you understand how your body metabolizes the food that you eat, you can start to view food as a vital fuel that helps your body function at optimum levels. This should be a turning point. It should change your attitude from one of ‘Oh no, I’m on a diet’ to a more positive ‘I’m doing this for me, to make myself healthier, fitter, stronger, leaner’.

Pretty soon you are going to be feeling and looking better. Think of that boost of self-confidence that you are going to experience. So get ready to roll and flex that determination. Whether you have 3kg (71b) to lose or 30kg (701b), this regime is only going to work if you are committed to changing your eating and exercise habits for life.

The rest of this section offers advice on weight, and on setting goals for (and managing) weight loss; suggests how to cope with the cravings and snack attacks that may arise when you are on a diet; and gives tips on taking supplements and sticking to a healthy diet, even when you lead a busy lifestyle. It is followed by the three-step programme and nutritious recipes that form theMainstay. Plus, there is also a section on adapting the plans to suit a vegetarian diet, which includes some delicious low-carb vegetarian recipes.

DIETARY MYTH

Myth: low-fat or non-fat means no calories. Fact: many low-fat and non-fat foods still contain a lot of calories. Often these foods also contain extra sugar, flour or starch thickeners to make them taste better. These ingredients all represent extra carbohydrates. As we have seen, you need to eat healthy fats to lose extra fat.

My Trip to Bangladesh Cont…..

The assignment is proceeding well, the evaluation questions have been designed and the questionnaire and show cards are prepared and translated in to Bangla. I will be using an “In Depth” interviewing technique. The evaluation itself has 2 aspects to it. Firstly; to looking at the internal mechanisms which either makes them effective or not as the case may be (As an internal service provider) and; secondly, getting conformation from outside the Unit (As an external service provider) to establish if they were effective. The main internal interviews have been conducted and now I have to conduct the external interviews. The external interviews are going to be held in the districts of Dinajpur, Nilphamari and Lalmonirhat. I will have to undertake an 8 hour journey over road to get to Sayedpur where I will be based. Hope to get back to Dhaka on the 15th.

The Elder Scrolls Online – “PatchManifestError” In TESO Launcher [Workaround]


[Text-Only – This post is initially Text-Only, to allow posting this as fast as possible, to help others.
I may return and add additional graphics/screenshots pertaining to the article… Soon™]


Just now, I ran into an issue starting up TESO, where the Launcher gave an error message – oddly, it was slightly different than the message my Gamer Wife beside me got – one of us got “Error 210” while the other got “Error 206”. Here is an example of what the Error Message within the TESO Client Launcher looks like:



Popping into the Steam forum and the Official Bethesda/Zenimax Forum for the game, I saw a number of people mentioning they are getting this too, just today, like me. So, I wanted to come here and post a ‘quick fix’ that can get past the error message and allow fellow gamers, like me, to be able to play the game as quickly as right now, tonight [actually it’s more of a ‘workaround’ than a true ‘fix’, as it doesn’t solve whatever issue is happening with the Launcher/Client/Servers… I will post this as a “Workaround”].

Similar to an earlier issue with the TESO Launcher I talked about here at The Blog, the ‘workaround’ involves bypassing the Launcher itself and starting up the game manually via the Executable files… The instructions to do this are below.

For the Steam Version of TESO:

  • Open Steam
  • Right-Click on TESO in the Library and choose Properties
  • Click on the “Local Files” tab
  • Click on the “Browse Local Files” button to show the directory/folder of the game
  • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
  • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game

    For the Standalone Version of TESO:

    • Right-Click on the Shortcut (the icon that runs the game) on the Desktop (or in the Start Menu) for TESO and choose Properties
    • Click on the “Open File Location” button in the Properties of the game shortcut
    • You should find yourself in a Windows Explorer windows, looking at the “Launcher” folder of Zenimax Online
    • Go up one folder level to “Zenimax Online” (click on the Zenimax Online folder in Explorer)
    • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
    • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game)
      That’s it! Now the game should start up and you will just have to Login within the game itself.

      Unfortunately, I do not know what has caused this error, and I have not seen any Official Postings by Bethesda/Zenimax to explain it, as of the time of this writing. Although it appears to be some sort of Server/Launcher error, I cannot say specifically at this time. However, having testing this Workaround on different machines and with both the Steam Version of TESO and the Standalone/Web version of TESO, I can safely say that this should work for you, fellow gamer.

      Hopefully that helps – and See You In The Game!

      Workout Anytime in Louisville Business First Inbox

      Workout Anytime in Louisville Business First

      Workout Anytime of Louisville, KY was recently in Louisville Business First. The article features Louisville resident, Bobby Paisley. Paisley brought Workout Anytime to the Louisville market, and has been with the brand for four years now. Bobby has been able to successful build the brand and will be opening his third Louisville location this March. Along with fellow fraternity brother from WKU and Regional Developer Greg Parker, they have built the brand in Louisville and surrounding areas in Kentucky.
      You can read the full article here. 

      Raptr – Closing Down This September 30th, The Blog Here Says ‘Goodbye Old Friend’ To The Once-Useful Program


      Just a notification that the ‘Graphic-Configurator, Game-Installer, Gameplay-Recorder and
      Social Media client that tried to tie it all together’ – Raptr – will be no more, as of September 30th, 2017

      A few days ago, I received an email stating that Raptr was ending the program/client which at one time was tied-in with AMD’s Graphic Drivers as “AMD Gaming Evolved”. Now that both NVIDIA and AMD have their own ‘game configuration utilities’ and ‘game recording capabilities’ (via Crimson for AMD and GeForce Experience for NVIDIA), “there is no need for such a separate utility”, as Raptr’s ‘Farewell Letter’ basically states:

      “We are sad to announce that we will be closing Raptr on September 30th, 2017. We want to start by thanking you for your support over the past 10 years.

      The world is different today than when we first launched Raptr. Many companies offer game optimization tools. Having an independent platform to do this is no longer necessary.

      On September 30, we will start the process of shutting off access to your Raptr account and disabling features. If you’d like to export your tracked game play history, you can do so immediately using the instructions below:

      • Go to Raptr.com
      • Sign in to your Raptr account
      • Click to get your gameplay data

      If you have any other questions, please send us feedback.

      We are proud of the service we built and the community who helped grow Raptr.  Thank you, once again, for your support.

      Dennis “Thresh” Fong
      Co-founder and CEO”


      Mr. Fong Qin, known worldwide as “‘Thresh’ Fong” for his 1990’s Quake and Doom tournament career, was also the co-founder of Xfire (which itself was acquired by Viacom in 2006). While the Raptr/Gaming Evolved client was useful, it seemed to have challenges from close to the start [or at least, noticeable in hindsight, from when I first started using it].

      The Press Release – the notification that Raptr was closing down – as it looked on the Raptr website, September 2017
      (Click to see Full Size)

      At one time, Raptr offered Rewards for playing (and letting it track your Hours or Record your Gameplay); ‘Reward Points’ that you could collect, every time you Optimized a Game (let the utility auto-configure your in-game options/settings for you), or viewed/contributed to a game Forum (similar to Steam’s Game Forums [forii?]). You could also earn Raptr Reward Points just by playing a game and having it running (it gave a running total of your Hours Played).

      The Raptr/Gaming Evolved Client, as it looked in 2014, showing the Reward Points collected at one time
      (from the Gaming Evolved/Raptr Press Kit, Click to see Full Size)

      Prizes to spend your Points on were Draws for, or outright purchases of, Full Games and game tie-in material, such as Character Costumes or Vehicles (Mounts). Just before it was taken away, I even saw some Computer Hardware in there (some dated GPUs mind you, but still, it was neat to see some computer parts you could earn ‘with time played’ only). I never did win a Draw for a Retail Game, but I heard from a couple of people who did. There were many, many upset users, who had been saving for years (literally), at the loss of the points system. Some noted at the time that perhaps it was an early bell, tolling for the end of Raptr, even then…

      The Raptr/Gaming Evolved Client, as it looked in 2015, showing Plays.Tv in its ‘built-in’ Beta phase and Graphic Drivers being kept up-to-date [I owned an AMD/ATi GPU at the time], the client still showing Reward Points being tabulated, and the Twitch Broadcast implementation
      (Click to see Full Size)

      There was a Forum interface built-in to the Raptr client (directly-accessible within it) that was similar to Steam’s Game Forums [too similar?], where people could discuss games, talk about upcoming releases, and share Screenshots; but there wasn’t too much going on in them [that I could see, personally]. There were some helpful and contributive posts, but they were always few in number:

      Example of Raptr/Gaming Evolved Game Forums, showing Guild Wars 2, circa 2016
      (Click to see Full Size)

      As ‘the end’ neared, the Forums became overrun slowly by Spammers and non-English posts talking about other websites (not that there’s anything wrong with speaking other languages, I know a bit of a handful of languages myself, but it was an English forum and much of these posts were clearly Spam of one sort or another). People started asking why things weren’t getting ‘cleaned up’, near the end.

      The Raptr/Gaming Evolved Official Raptr Forum, shown in the client, displaying the number of users of the forum
      (Click to see Full Size)

      While many felt it was ‘just like Steam’ or ‘not needed’ even back then, it still boasted over 100 Million registered users at one point (as evidenced by the number of users within the main Raptr discussion group, above) – and it was even ‘targeted by hackers’ in 2015 – infiltrated in an attempt to gain access to the many users’ data and potentially personal information. A notice went out in January of that year, notifying users to change their password, as a result of the recent security breach:

      Raptr Forum Notification, urging users to change their Passwords, after a recent security breach, circa January 2015
      (Click to see Full Size)

      Personally, I feel sorry that I couldn’t spend more time with Raptr/GamingEvolved, as I only discovered it a couple of years ago.. Over the entire time, my own illness prevented me from posting more, sharing Screenshots more, and talking more about Releases and Reviews [as it does here in this blog!]. I feel like it could have been ‘the next Steam with bonus game configuration’ perhaps – but alas, it simply had too many challenges going against it… People started asking for Chat interface (a la Skype) and Voice Chat, but the Voice part never came. People wanted a GVR (Game Video Recorder) and while that arrived, in the form of Plays.tv – first in the app itself and as a stand-alone utility – perhaps it was too late to save Raptr, as both NVIDIA then AMD, came out with their own ‘built-in’ gameplay recording capabilities about the same time. For example, in 2013, NVIDIA’s Shadowplay became part of their Settings Optimization client, GeForce Experience, which allowed high-performance gameplay recording. Eventually, AMD’s ReLive, part of their Crimson GPU Driver update, also allowed high-quality gameplay recording as well. Both of these essentially negated the game recording aspect of Raptr (Plays.tv, which continues onward today as its’ own stand-alone recorder):

      Information Panel about Plays.TV, the gameplay recording utility that was once included with Raptr/Gaming Evolved
      (Click to see Full Size)

      Although many didn’t use Raptr, or even like it, there were those that used the client to at least keep track of their Hours Played, used it a light social-media app, or just enjoyed the semi-automated Graphic Configuration within. As a former user – that wished he used it more – I myself say a sad ‘Goodbye’ to Raptr. So long, old friend, I wish I got to know you better…

      Game Recording with MPEG-4: using H.264/AVC in Programs such as Dxtory, Bandicam and MSI’s Afterburner (Text-Only, Long Version)


      This article is a Text-Only version, showing how to use a few programs (one of them completely free) to utilize this efficient codec in game recording, using steps and settings that I personally found optimized performance and showing which ones slowed things down when recording. 
      For a video example of how to set the x264/AVC codec recordings to be editable in
      Sony’s Vegas or Adobe’s Premiere video editing applications, see my post about it here:
      http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html

      The MPEG-4 video codec has been around for over a decade now. I remember recording TV shows to watch later on, on a system with an ATI All-In-Wonder videocard (back when videocards had only 8MB of VRAM!) and the joy of the changes I was seeing, going from compressing the shows in MPEG-2 format to MPEG-4 using either Quicktime or DivX (or it’s open-source competitor, XviD). Smaller file sizes and still decent quality? Awesome. Those were MPEG-4 Part 2 or ASP (Advanced Simple Profile) iterations of MPEG-4. Today, we are up to MPEG-4 Part 10 or AVC (Advanced Video Coding) and great times are to be had by all who record their video game adventures, as modern hardware and capturing apps allow not only for h.264/AVC to be used for video compression and archiving – it can also be used for small filesize ‘live’ game recordings and great retainment of detail, if desired.

      Dxtory, Bandicam and MSI Afterburner all provide the ability to utilize the various codecs installed on your system to record with (others do as well, I am merely choosing these more popular game recording apps as examples). To record with MPEG-4/h.264/AVC, it is simply a matter of installing that codec on your computer [if it isn’t already], then choosing it inside of whichever game recording app you prefer. The codec’s interface (GUI, Graphical User Interface) will allow you to change whatever settings you wish – but these settings will be quite different from what you may be used to, if you have done any h.264/AVC video compression in the past. Why?

      Because we are going to be balancing the settings – not just for retaining quality at a small file size (as you would like to when archiving a movie to keep on your computer) – but now also for recording speed. For instance, if we try to set things for high compression and attempt to keep detail at the same time (as we would for archiving a movie), it simply takes too long to process and compress the changes between frames ‘on-the-fly’ and save them into a file, when attempting to record game output. This would result in the game ‘lagging’ and dropping frames to try and keep up, as it falls behind dealing with analyzing and compressing and then writing the data, resulting in a video with ‘choppy’ playback as well. So, when recording our gameplay ‘live’, we must now consider the various settings and their affect on how fast we can put through the processing of frames and writing it to a file at the same time.

      I will be addressing most of the settings in the h.264/AVC codec, but not all of them. I will be concerned mainly with the ones that will slow down processing, so that things do not take too long and fall behind and cause ‘lag’, both in the game and the resulting video file itself. This differs from compressing for archiving our own movies, because instead of being only concerned with Quality (setting everything on ‘high’ and letting it take as long as it needs), we must now balance Speed of the compression as well, being now more concerned with each of these settings and how they can possibly slow things down when recording the ‘live’ game rendering. As is the nature of live recording, we want it to easily and quickly process the frames and save them to a file. I will explain how to do all of this.

      Recording with H.264/AVC

      “x.264” is a free/open-source utilization of the h.264/AVC codec (the XiWave GNU GPL MPEG-4 Codec). It is normally a command-line driven executable [when you run it, you type things in, to get it to do things], so what we want for game recording with these programs, is a version with an ‘interface’ so that we can just tell our apps what to do with the mouse and buttons/sliders and it translates it into commands for the codec. All we would have to do is choose a few settings and checkboxes (what most people are used to – a nice, easy, graphical user interface).


      Doing a search for ‘x264+windows’, there are a few places you can get the installer/setup program for x264 and Windows, here are the main ones:

      This is the “Official” Open-Source Video For Windows version of the x264 codec (Red Logo) at the time of this writing:
      http://sourceforge.net/projects/x264vfw/

      This official codec is what is covered in the “Easymode” sections of this article


      This is an “Unofficial” x264 Video For Windows Codec (Black Logo), at the time of this post, that allows for far more settings to be edited via checkboxes and pulldown menubars, but is more difficult to use (these two links are both the same thing):
      http://www.digital-digest.com/software/x264_VFW_Codec.html
      http://komisar.gin.by/index.html

      This unofficial codec is what is covered in the “Hardmode” sections of this article


      Basically, you can see that what we want is a “Video For Windows” version, which (thanks to all those great people that have worked on it over time!) has a nice, easy-to-use interface for picking the settings you want to use, without typing in a long line of commands every time. After installing the codec/interface into Windows, it’s just a matter of opening whatever game recording program you prefer and selecting it to use it.

      Here’s how to select it for usage in these three game recording programs:

      Recording with x264 and Bandicam

      • Once the codec is installed, run Bandicam and go to the Video tab and click on the Settings button
      • In here, under the Video category, next to Codec, click on the pull-down menu bar (with a little triangle at the end) and choose External Codec, which allows you to use other codecs installed in your system
      • Then, click on the three ellipsis (““) button and it will let you “Select external video codec”
      • Select the “x264vfw” H.264/MPEG-4 AVC codec from the list and click on the Configure button
      • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

      Recording with x264 and Dxtory

      • Once everything is installed (Dxtory requires dotNET 4.0, a download link is on their main Download page), run Dxtory and click on the Movie settings button (which shows a little handy-cam with it’s lcd screen hanging out the side)
      • Under the Video Codec category, next to the word Codec, click the pull-down menu bar (with a little triangle at the end) and choose “x264vfw” H.264/MPEG-4 AVC Codec from the list and click on the little pen icon/button to the right, which opens the Configuration dialog box of the codec
      • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

      Recording with x264 and MSI Afterburner

      • Once the codec is installed, run MSI Afterburner and click on the Settings button at the bottom 
      • In here, go to the Video Capture tab and under the Video Capture Properties category, click on the pull-down menu bar (with a little triangle at the end) and choose “VFW compression”, which allows you to use the other codecs installed in your system
      • Then, click on the three ellipsis (““) button and under Compressor, click on the pull-down menu bar (with the little black triangle at the end) and choose “x264vfw” H.264/AVC codec from the list and then click on the Configure button to the right
      • This is the x264vfw configuration interface and in here are all the settings we will talk about next…
      » Note:  To record with x264/h264/AVC and have it easily-importable and recognized properly in NLE’s (Non-Linear video Editing applications, such as Sony’s Vegas and Adobe’s Premiere lines of products [for example]) without having glitches or corruption or other problems, one setting for MPEG-4 codecs must be changed from the Default Setting right from the start. I created a video example of how to change this setting in Bandicam, Dxtory and MSI’s Afterburner and the post with that video can be found here at this blog:
      http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html
      To understand some of the concepts and settings utilized by this codec (and helpful information to know for game recording and video compression in general), a quick word on Bitrate:

      [This section is highlighted in green headings for navigation, to assist you whether you are re-reading this article or you feel you know a lot about bitrate in video editing and wish to skip it]

      Bitrate (in Layman’s Terms)  /start

      When talking about game recording, bitrate is an expression of the amount of data we are using to create the recorded file [literally, how many bits of information we are using]. It is usually expressed as how much information per second we are telling the codec to use, to represent the frames that are getting pushed through, and save them to our output video file.
      The main thing to remember is that More Bitrate = Bigger Filesize

      For example, if we record using a 1MB per second (1MB/s) setting, then after 2 minutes of recording (120s), our recorded file size will be 120MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 3600MB (3.6GB).
      If we record using a larger amount, let’s say 2MB per second (2MB/s), then after 2 minutes of recording (120s), our recorded file size will be 240MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 7200MB (7.2GB).
      It’s that simple. The more bitrate we use, the bigger the recorded file will be. 

      For those used to video compression and editing, or even general users of multimedia, you may be more familiar with data rates in the realm of:

      MP3 (MPEG-3 audio) song bitrates such as: 128kbps, 192kbps, 320kbps
      PSP (PlayStation Portable) video bitrates such as: 768kbps, 1500kbps
      DVD (MPEG-2) bitrates such as: 8000kbps, 9800kbps
      Blu-Ray/HD bitrates such as: 16000kbps, 25000kbps, 50000kbps

      All of these are usually expressed as Megabits/Kilobits/bits over time (in seconds), hence the “ps” at the end.
      eg. 16 Mbps = 16,000 kbps = 16,000,000 bps (bits per second)

      ~bits (lower-case ‘b’) and Bytes (upper-case ‘B’) are different~

      There are 8 bits (lower-case ‘b’) in 1 Byte (upper-case ‘B’)
      8 bits in 1 Byte
      8000 bits = 8 kilobits (‘kilo’, which is 1000 Bytes) = 1 KiloByte
      8000 kilobits = 8 megabits (‘mega’, which is 1000 KiloBytes) = 1 MegaByte 

      For example, if you were rendering out a movie to upload to YouTube and you chose an output bitrate of “8000 kbps” in your editing/compression application, that is 8 Mbps (bits, lower-case ‘b’), which means 8 Megabits per second. Converting that into Bytes (upper-case ‘B’), means that video will be running at 1 MBps, which is 1 MegaByte per second (upper-case ‘b’). 

      At that bitrate (1MB/s), it is the same bitrate as our example above [just under where it says “More Bitrate = Bigger Filesize”] and it will take up roughly 60MB of space on your hard drive every minute of recording. Thus is the interaction between Bitrate and File Size and how to convert between the two. The higher the bitrate setting used, the bigger the output file size will be (the recording). 

      There is one other formula to remember: More Bitrate = Better Quality. This formula applies to almost everything digital: video (DVD/BluRay), audio (MP3/MP4), pictures (PNG/JPG), any multimedia that is digital. If you allow/use more bitrate, the picture/music/video is represented better [or to be more precise, closer to the original input] because there are literally more bits used to create the picture/sound/etc.

      Quick example – think of a square that is divided up into 9 sections. Now pretend it is trying to ‘represent’ a painting, any painting you can think of. With only 9 blocks of data available (each one can only be a certain color), then it would look like nothing but some colored blocks and barely look like the painting at all. Now, imagine a square divided up into 80 sections. Pretend it is trying to represent the same painting. Even though it will be ‘blocky’ still, if each section can be only one color, it will still look ‘more like the original’ than the 9-sectioned block, right? 

      That’s the interaction of bitrate and quality.

      Which means, for digital compression, it is essentially a ‘balancing act’ between Quality and File Size, with Bitrate being the tool to measure with. Do you want a high-quality output? Then turn up the bitrate and you’ll end up with a large file size. Do you want a small file size? Then lower the bitrate and you’ll get lower quality as well. That’s the essence of bitrate, in a nutshell.

      Bitrate (in Layman’s Terms)  /end



      The x264 Interface and Configuration in “Easymode”
      (The Official interface with red x264 logo)

      With the official version of the interface for using the x264 codec (“x264vfw”), there is only one screen, with pulldown bars to adjust most settings.
      The Basic Section

      To start with, under the Basic category, there is a Preset setting. This is a very handy setting, which makes many of the more obscure/hidden choices within this codec (there are dozens, behind the scenes) easy to configure. By clicking on the question mark near the bottom right corner (“?”), you can see the intimate details of the different Profiles and Presets that can be selected in these pull-down menu bars within this first “Basic” section of the interface.

      For game recording, we are more concerned with speed. We don’t want the codec to break out it’s magnifying glass and scrutinize each frame coming through in strict detail, because that would cause it to slow down, which will cause it to ‘lag’ behind, not only in the game, but in the recorded file itself as well (“choppy-ness”). 
      So, the first thing to do, when using this codec for ‘live’ game recording, is to change the Preset setting from it’s original default of Medium to “Ultrafast“. This is the fastest option for this setting.
      The other options, such as Superfast, can also be used, but be aware that the more you go down the selections available, the more options are being ‘turned on’ behind-the-scenes with this codec, and while some of them do help apparent quality of the video, they are geared more towards a slow, steady, long-term compression session (like when you might archive a video/movie) with high-quality settings and slow, scrutinizing analysis of the frames. While not a bad thing, for game recording, we don’t want that. We want it to save what we are seeing on the screen fast, to a file. We want speed. Feel free to take a look and learn about the various options the other Presets turn on [many of them are covered in this article further down], but for optimal speed, Ultrafast is the setting to use.
      The next pull-down set of options to choose from is Tuning. These are also a set of pre-selected options that, depending on which one you choose here, will enable or disable certain functions in the codec. These choices are helpful is easily fine-tuning the codec to compress a movie/video/clip of each certain type, as it enables options in the background that will help with efficient, detail-oriented compression of that certain type of material. 
      For game recording, again we are more concerned with speed. These options, while helpful in a slow, ‘leave-it-overnight’ compression session of clips or movies of ours we want to save; for live game recording we want to leave it at it’s default setting of “None“, so that the codec keeps it’s magnifying glass put away and doesn’t spend any extra time analyzing the frames coming through.
      There are two checkboxes below these first two pull-down menus and they are titled “Fast Decode” and “Zero Latency“:
      Fast Decode turns off a few options [behind the scenes] that help by reducing the processing ‘load’ of the video stream, such as CABAC and Deblocking [these are explained in more detail further within this article]. These are options that help keep some quality (especially at lower bitrates), but as the name proclaims [“Fast”], for optimal speed of recording we want this option “Checked“, to enable it (which will turn off these extra options for now).
      Zero Latency also turns off a few options behind the scenes, ones that increase compression time, such as B-frames [explained later in this post] and how far to ‘look ahead’ at frames coming in, for analysis. Since we want speed for recording our game footage and less analysis [remember, more analysis slows things down], we want this option “Checked” to turn off the extra options that are ‘behind-the-scenes’ with this setting.

      The rest of the settings in this Basic section of the interface need not be adjusted for game recording, but a good Wikipedia page, talking about the various Profiles and Levels and their capabilities can be found here:
      http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC

      The Rate Control Section

      All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

      The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision to make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

      To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means 2-3 times the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes for example). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
      Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
      CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on, but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spent analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
      Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording, because the result of this setting [at this time] is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’ which is much higher) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it [and doesn’t]. This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
      CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps quality down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
      Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression/archiving with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
      To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
      CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

      Some Data / Bitrates seen with CRF

      Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

      Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
      Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
      Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

      CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
      CRF 42  ~1600 kbps
      CRF 32  ~6000 kbps
      CRF 29  ~8500 kbps
      CRF 26  ~14000 kbps
      CRF 23  ~22000 kbps (codec default setting for CRF)
      CRF 22  ~23000 kbps
      CRF 21  ~32000 kbps
      CRF 18  ~45000 kbps
      CRF 15  ~64000 kbps
      CRF 13  ~79000 kbps
      CRF 10  ~101,000 kbps
      CRF 5    ~119,000 kbps
      CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

      As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

      It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

      What CRF setting to use

      So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

      The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
      Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
      Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

      The higher the bitrate (lower CRF number) the higher the quality and file size will be
      The lower the bitrate (higher CRF number) the lower the quality and file size will be

      You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

      All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

      That’s about it for the nice-and-easy one-panel official graphical interface for the x264vfw H.264/AVC codec. Just a few small changes and a decision of what quality/bitrate you would like to use and it is all ready  for you to record with whatever game recording program you prefer. Have fun with it!

      What follows below, is the unofficial, more detailed, three-tabbed version of the x264vfw H.264/AVC codec interface. If this version is not installed on your system, or you do not care to use the more complicated version (you definitely don’t have to), then please skip down to the section called 
      “Slash-whew-sweating-emoticon”. No version is better than the other, by the way, they both utilize the same codec, one just gives you more options to set [and I happened to install it by accident when learning about recording with the x264 codec in the beginning], that’s all.

      The x264 Interface and Configuration in “Hardmode”
      (The Unofficial interface with black x264 logo)

      There are three main tabs in this version of the x264 Video For Windows interface: 
      Main
      Analysis and Encoding
      Rate Control and Other
      Each Tab has many different settings. We will talk about most of them – but not all of them – we are mainly concerned with the ones that will affect game capturing. I am going to be going through the Tabs in reverse order. This will help to explain the concepts in a more logical order [believe it or not].

      Rate Control & Other Tab

      In the ‘Rate Control and Other’ Tab, our main attention need only be on the VBV bitrate/buffer settings in the first Rate Control area. The other settings can be tweaked, but this need be the only one to change – when concerned only with game capturing – as it can dictate the final output filesize of our recording. 
      Why all that math and talk about bitrate above? Because of the very first setting we are going to cover, part of the Rate Control section:

      The very first setting in this third tab of the x264vfw interface is something called “VBV max bitrate” and it is expressed in “kbit/s”. Yay, we just learned about that! It means that the value typed in here will be accepted as “kilobits per second”.

      What does the “VBV” mean? It stands for “Video Buffering Verifier” and this setting will let us state the overall maximum bitrate we want to restrict the video recording to be, so that it does not go over it. 
      Why would we want to do that? Remember that the amount of bitrate (per second) that we are using to record with affects the output video file size. If it is a large amount, the file size will be bigger. If we wanted to restrict the recorded output file size and keep it smaller, we could put an amount in here and it will do it’s best to keep within that amount, allowing us to control how much bitrate it uses to record with (and thus control how big the game recording output will be).
      So, to use our example just above, if we wanted to restrict the bitrate of the game recording output to be only 1MB/s (1 MegaBytes per second), what do we do? 
      That’s right, we convert it to lower-case (small-‘b’) bits, first:
      We want 1 MegaByte per second of a bitrate
      1 MegaByte is 1000 KiloBytes
      since 1 Byte = 8 bits
      then 1000 KiloBytes = 8000 kilobits
      so to restrict the maximum bitrate allowed for our capture to 1MB/s (taking up 60MB of drive space per minute of recording) we would put “8000” in the ‘VBV max bitrate’ box.
      This box then, gives some control over how much diskspace you want to devote to the game recording file output. If you do not want to restrict the bitrate, do not put anything in these first two boxes on this third tab. 
      If you do want to set a restriction here on the bitrate, set a “buffer size” as well (the box just below the first one). This ‘buffer size’ gives a sliding-window-view of how much the codec will keep track of what is going through and ‘watch’ to make sure that it stays below the amount in the box above (the ‘max bitrate’ box). It is used more for compressing for portable devices (which have less RAM and are not able to buffer/keep track of a large amount at a time and therefore must have a restricted amount set here).  
      For our purposes – game recording – remember that we must be more concerned with speed (to reduce lag), so in this box, we cannot put a very large amount. Why? Because the larger the buffer, the more that the codec will try to ‘store up’ in RAM, in order to ‘watch it’ (process it) and keep track of how big the bitrate gets, in order to keep our restriction of the ‘max bitrate’ box on it. So, a smaller amount such as “2000” up to maybe “4000” in this ‘buffer size’ box is a good amount. The overall buffer size also allows room for the video to ‘go over slightly and come back down to within’ the amount we set, but the larger the amount is, the more data will be held behind for processing that will be done on the game recording and the slower everything will get – and we don’t want that – we want as close to ‘Lag Free’ recording as we can get. A “0” then, would be the optimal amount to put in here, when speed is a concern; but then we would not be able to set a maximum bitrate… more on this later in the article…
      That’s all we will adjust on the Rate Control & Other tab.
      Analysis & Encoding Tab
      Here’s where we will do the most adjusting, as these settings in here are the ones with the most impact on speed and game recording.
      In the Analysis section, the first few adjustments are checkboxes concerning Partitions. Partitions are exactly what they sound like: it is how much the codec will divide up the screen, into sections, so that it can analyze each section and look at what is changing, decide how to compress it, how much to compress it, and so on. For game recording, remember we are more concerned with speed, than messing with how the codec is going to scrutinize the screen, so we are going to uncheck everything in the Partitions sections. Really. We are also going to uncheck the Adaptive DCT setting (which will deselect/lock out/grey out some of the checkboxes for us).
      For game recording, we are going to leave a checkmark in the “Fast P-skip” setting.

      Frame Types (in Layman’s Terms)  /start

      There are three main types of frames in video encoding:
      I-type frames
      P-type frames
      B-type frames

      I-frames are ‘Intra-coded Frames’, sometimes called Information Frames, because they hold the most information in a ‘group of frames’ (which is what makes up a video) and therefore I-frames take up the most space (as far as the amount of space it will take up on your hard drive). They also look the best as well, as they usually use a higher bitrate (which is why they take up the more space). They are utilized by the codec to indicate a large change in what is going on in the video/on the screen, like a sort of ‘reset’. They can usually be identified by the screen being ‘cleared up’ of blocks/glitches from video compression, as the compressed video is played back. 

      For instance, if you are running down a dark hallway and turn a corner and there is an explosion, in order to more accurately represent that large change in color and motion in the game recording, the codec will most likely decide to insert at least one I-frame and use a larger amount of data to keep more detail as it tries to represent all of the huge changes going on, on the screen and in the frames.

      I-frames also serve some other purposes: the ‘intra-coded’ means that they are not dependent on other frames around it in the video  [which is a collection of frames], as they hold all the information needed to represent the frame all within itself [remember ‘inter-murals’ in school involved other schools and ‘intra-murals’ was contained all within your own school, this is the same thing]. 

      They also are usually used as Keyframes. Since I-frames contain all the data need to represent the entire frame, on it’s own, video applications can use it as a ‘starting point’ or ‘reference point’ (“keying off of it”) and allow for more compatible cutting/editing on them and use them to start ‘seeking’ from, when editing a video. The two main things to remember about I-frames/Keyframes [the same thing] is that (1) I-frames can stand alone all by themselves, as they have all the information needed to display an image/frame, and (2) I-frames allow video editing programs [like Sony’s VegasVideo/MovieStudio/Pro and Adobe’s Premiere/Pro] to ‘reset’ and show you where you are starting to edit from – if there are a large number of frames between these I-frames (“keyframes”), it will take longer for the program to read between all of them and then show/allow you to start editing from where you have selected in the video editing program (it will take longer overall to edit by hand as the program starts and stops and you have to wait while editing).  

      MJPEG game recordings are made up entirely of I-frames, as every frame in the captured video is it’s own JPEG compressed picture and it is the most editing-friendly and compatible codec to capture with, no matter what game capturing program you use. In fact, most video editors can read MJPEG without installing any other codecs on your system 

      P-frames are called ‘Predicted Frames’. They hold far less information in a group of frames (video) and take up far less space. They actually only hold the differences from the Previous I-frame, that is, they only keep track of the changes on the screen/what has changed on the screen since the last I-frame, which is why they are far smaller than I-frames. 

      For instance, if you are playing a character in a game and you are just standing at the mailbox reading an in-game message, there isn’t much changing on the screen at all. Perhaps on the side of the mail window, there is only someone running by and that is all that is happening on the screen, nothing else is moving at all. P-frames will only keep track of the movement that person running by and not keep track of the mail message or anything else going on in the frame (things that aren’t moving) and it will save only those changes to the game recorded file as P-frames. Hence, they can indeed take up a much smaller amount of space in a game recording, since they are only recording the things that are changing on the screen.

      B-frames are ‘Bi-directional Frames’ (called ‘Bi-Predictive Frames’). They hold even less information than P-frames, as they are only keeping track of the differences between any frame before or after itself (even using P-frames that are around it and not needing an entire I-frame to start from). This means they are only only keeping track of very small changes (only one frame ahead or behind) and can therefore be extremely small and take up very little space in a video file. B-frames are one of the reasons why we can archive/compress movies in such small file sizes – only the differences of what is going on, on the screen/in the frames, is being kept track of. Both P and B frames help to save a ton of space when it comes to video compression.

      Frame Types (in Layman’s Terms)  /end

      Why all that talk about the different types of frames in a group of frames (video)? Because now we can easily understand the next few settings in the configuration window. 
      Fast P-skip is a setting that allows the codec to look at P-frames and decide if there are enough changes to analyze it further, or ‘skip’ over them and just process them as they are. This is decided on by the codec when it looks at some other settings on this tab (such as the “ME” settings) but for the most part, it helps speed – our main concern with game recording – more than it helps things to ‘look good’, so we will leave a checkmark in it, as we briefly stated above.
      Max frame refs and Mixed refs are talking about Reference Frames and how many to use in a group of pictures/frames. When encoding, a codec can use frames in front (P-frames) or in front and behind (B-frames) of the current frame it is working with, to keep tracks of what has changed between frames. When encoding for movies, we want as many as possible (or as many as the codec decides to put in) in order have things keep a lot of detail wherever it is needed, especially for scene changes; but for game recording, we want things to run faster (so that the game capture does not lag the game or cause lag within the recorded file (“choppy-ness” in playback), so we actually want the codec to use as little number of Reference Frames as possible.
      Remember, every time the codec has to ‘think’ or analyze the frames more, it will slow down to break out it’s magnifying glass and scrutinize, so what we want for this setting is the lowest (one) Reference Frame (put a “1” in the Max frame refs box) so it doesn’t have to do much more work than just looking quickly one frame ahead or behind, when when figuring out what has changed. 
      Mixed reference frames allow the codec to compress frames based on changes in frames that are also being referenced by other frames [if you can follow that]. Again, the codec is going to have to slow down and take a look, and for game recording, we want things to stay lean and mean (fast), so uncheck this bad boy (if you make the Max frame refs a “1”, it will be disabled anyway, since it does not have enough frames to deal with to look around at them anyway).
      The next few settings down that all say “ME” refer to Motion Estimation. This is the process of keeping track of where things are moving on the screen and how to deal with compressing the changes it is keeping track of. For game recording, we want the codec to analyze as little as possible (so it doesn’t lag behind what is going on, on the screen) so we must choose the lowest settings for all of the “ME” options. 
      That means “Diamond” analysis as the ME algorithm (pulldown menu choice), an ME range of the smallest we can choose from (“4”) and the lowest amount of Subpixel ME refinement we can have (“0” or no subpixel refinement). Remember, we want the codec to just save what is happening on the screen and analyze as little as possible, so it doesn’t fall behind.
      With the choices above, Chroma ME and the Psycho-visual Rate Distortion Optimization strength will be locked out/not applicable, which is good for game capturing, as it scrutinizes the frames that are coming from the game even less.
      The next couple settings, in the middle column of the tab, that say GOP in them, are talking about the size of the Group Of Pictures we want in our capture. If you can recall the things we have already said about how a codec decides to compress frames, it looks to frames ahead and behind at times, looking at the differences between them, and then decides how to compress the frames based on what it finds (and the settings we set). For movie compression, we want a large number, so that the codec mainly keeps track of the differences only between frames, as much as it can, and a large GOP size allows it a lot of ‘room to move’ and look around. For game capturing, we don’t want it to be quite as big, as the more frames on it’s plate it has to deal with, the more it will slow down and take time to decide what to do with them. 

      There is also a chance that some video editing applications will not like the large (or any) Groups Of Pictures and may see the video stream as corrupted or give wierd artifacts/effects when it plays it back. This is one reason why using MJPEG as a game recording codec is suggested often, as it’s built-in GOP is “1”, as evey frame is it’s own self-contained ‘group’ and no editing app has to mess with it or over-analyze it. It is the most compatible, but you can use any codec you wish, but you may have to change the codec’s Keyframes or GOP to “1” for compatibility [more on this in future articles!]


      Hence, we will set a nice low number [I personally used “50” around the time of this post]. Be aware that if the number is a multiple of the framerate you are recording in, Videophiles may notice the screen ‘shifting’ or having other odd effects ‘in time with’ the framerate (eg. if recording at 60fps and the GOP size is 60, some people notice the screen ‘correcting’ or ‘shifting’ or ‘flickering’ every second, as it ends the group or frames and starts a new one every second).
      You can use “1”, which will make the codec act like MJPEG in a way, but then the codec will not have any room to analyze/compare/compress anything, and the resulting file will require much more bitrate to keep detail (to accurately represent what is going on in each frame)… more on that later in this article…
      Weighted P-frames and Max consecutive B-frames is yet more analysis for the codec to do (especially B-frames, which remember, is a frame that ‘looks both ways’ for changes to frames in front and behind it, therefore can slow down recording a lot). For game capturing, we gots’ta keep setting things for speed and not letting the codec analyze too much. Change the Weighted P-frames to “None” (via a pull down bar) and the B-frames to “0” if they aren’t already. This is effectively telling the codec “you ain’t got time fo’ B-framez” so the rest of the settings that say “B-frames” should be locked/greyed out after that.
      [In tests, enabling B-frames would actually crash the x264vfw app]
      Under the Encoding section, the last column of this tab, the first section has to do with Deblocking
      Deblocking is a way to try and ‘hide’ areas where the codec has cut out detail or ‘let go of data’ (lossy) in attempts to conform to the other settings in the codec and/or compress the frames highly. I’m sure almost everyone has seen Compression Artifacts like macroblocks or Gibbs Effects (mosquito noise) in high/over-compressed video and video streams. It’s not very pretty and turning on the Deblocking filter is one way of masking these artifacts, so that the video overall looks nicer to the human eye. 
      The problem with Deblocking is that the codec will smooth things out, when trying to hide artifacts (especially ones that occur with lower bitrates/quality). It can be forced to keep detail with negative values (useful for movies/games with film grain), but overall it still takes more compression time to use, as the codec stops and analyzes the frames, looking for what to Deblock. So, for game recording for the most part, for optimum speed, Deblocking should be disabled, that is, “No Checkmark” in the box for In-loop deblocking filter (which will disable the two Deblocking settings below it).

      [In my own trials/experiments, I found that a low amount of deblocking (as in “1”) for these two recording settings is acceptable and helps to hide some otherwise icky-looking compression effects that occur at lower bitrates (bitrate control is covered more in the next section), but for optimum speed (it is not needed at higher bitrates anyway) and especially for older/less powerful systems, turning deblocking off will always speed things up.]
      CABAC is extra analysis that can really make a difference in compressing video. Some mobile players cannot even use it though, as it requires more processing power. The optimal setting for this, as it is extra analysis/processing being done – for game recording – would be “Off” (unchecked).

       [I have successfully done many recordings with CABAC on, as it seems to have only a slight effect on recording ‘lag’ on my system; but for optimum speed/less lag when recording (and at a slight loss for keeping some quality), it should be disabled.. for speed. ]

      The only other thing to adjust in this tab, when game recording, is the Trellis setting. Trellis is a way of analyzing and attempting to keep certain detail when compressing, especially at lower bitrates, but as many times already mentioned, we want speed for game recording, so set the Trellis analysis to “Off” (via a pulldown bar). 

      Main Tab

      All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

      The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

      To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means twice the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed [I just realized this whole article can be it’s own drinking game]. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
      Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
      CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on [I hate watching a low-quality video stream online and it goes absolutely-stupid blurry at high-motion scenes just because there are many things happening on the screen], but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spend analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
      Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording. The result is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it (and doesn’t). This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
      CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps it down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
      Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
      To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
      CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

      Some Data / Bitrates seen with CRF

      Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

      Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
      Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
      Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

      CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
      CRF 42  ~1600 kbps
      CRF 32  ~6000 kbps
      CRF 29  ~8500 kbps
      CRF 26  ~14000 kbps
      CRF 23  ~22000 kbps (codec default setting for CRF)
      CRF 22  ~23000 kbps
      CRF 21  ~32000 kbps
      CRF 18  ~45000 kbps
      CRF 15  ~64000 kbps
      CRF 13  ~79000 kbps
      CRF 10  ~101,000 kbps
      CRF 5    ~119,000 kbps
      CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

      As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

      It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

      What CRF setting to use

      So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

      The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
      Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
      Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

      The higher the bitrate (lower CRF number) the higher the quality and file size will be
      The lower the bitrate (higher CRF number) the lower the quality and file size will be

      You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

      All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

      Slash-whew-sweating-emoticon

      That was a lot to take in at once – but you made it through – and now you are set to record using H.264/AVC, whether you prefer Dxtory, Bandicam or use the completely free-to-use Afterburner from MSI. You are also now knowledgeable in both the Official and an Unofficial version of the x264 Video For Windows graphical way of setting up the codec, to change the settings.

      Other than the Rate Control setting above (CRF) which you can adjust and set how you want it, the rest of the settings I have personally tested and found which ones allow for the faster recording performance and which ones negatively affect the speed of recording, utilizing the x264vfw interface (which these programs use to record in H.264/AVC). Turning off/down the ones I have stated throughout the article should give you the fastest/closest to ‘lag-free’ recording you can get with this codec, while still taking advantage of it’s compression capability. [My own Personal Notes/Opinions/Settings are below]

      Please note that if your system is older or not as capable (perhaps you have a notebook/laptop which has less capability than a full desktop system with it’s own dedicated videocard and soundcard), you may have to do things like lower the recording resolution (or the resolution you are playing at in the game), increase the CRF number (so that it uses slightly less system resources to process the recording and will then use less bitrate and less disk space).

      There are many things that can be done to help with speed, make for smoother recording, less lag, etc.
      Here is a link to an article I wrote earlier on this blog, with general Tips to help with game recording:
      http://gametipsandmore.blogspot.ca/2012/05/tips-for-game-recording-currently-text.html
      No matter what game you play or what program you are using to record, these Tips will help you overall, with trying to record your games.

      Lastly, please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you will. 

      As always, do some of your own testing, see what works the best for you on your system and get things looking exactly how you want them to look – and have fun with it!


      Personal Short Version/Opinion
      and 
      Settings I use:

      H.264/AVC (MPEG-4 Part 10), is not normally a recommended codec to record with, for most people. It does not have the capability of super-high-almost-what-you-see-is-what-you-get quality that other codecs like FRAPS1, YV12, Lagarith or RGB Raw would give you. 
      Heck, the highest bitrate possible (using the CRF setting, the fastest of the Rate Control settings in my tests) is only about 100,000kbps. That’s still about 2-4x the bitrate of the average BluRay movie mind you, and it seems fine to me, to look at the recorded videos of it.

      Even if I had Terabytes of hard drive space to record to, I would still like to record in as small a filesize as I can, attempting at the same time to keep ‘good enough’ quality. Gone for me, are the days of filling my drives with FRAPS recordings (which have very high quality though) when today, with the more powerful CPUs and GPUs, I can record in a high MJPEG setting (for compatibility with editing apps) or a high MPEG-1 setting (which saves a lot on diskspace as well and has decent compatibility with video editors) – and now I can save even more space and record with MPEG-4 AVC, if desired. 
      For instance, on my older system, a dual-core cpu with an NVIDIA GTS250, recording with x264/AVC brings my framerate down by about ten frames per second and sometimes more. On my newer system, a six-core cpu with an AMD HD 6870, recording with x264/AVC, with the same settings, brings my framerate down by only a couple of frames per second with my settings. Wonderful stuff.

      I did many, many tests to find out what specific settings made differences (especially with the Unofficial version of the interface) and for the most part, it turned out as intuitive as it seemed at the outset: any setting that increased analysis and processing of the frames slowed things down. 
      I had to test it all of course, and I found many settings that didn’t make a ‘huge’ impact on performance, and with more powerful hardware these are able to be used and enjoyed, helping to compress the frames even further, keeping decent detail and resulting in a very small recorded file size. As you can adjust/optimize settings far more in the Unofficial interface (at least a bit easier/graphically), I tend to use that one more than the Official version; but in essence, both are the same thing. Here’s some of my findings [my settings are in these square brackets]:

      For the Official (“Simple”, red x264 logo) interface:

      I found that, on a more modern desktop system, the Preset can be turned ‘down’ a bit (the amount of analysis going up a bit), to Superfast or even sometimes Veryfast, since many of the hard-cpu-hitting options like Trellis and larger Motion Estimations don’t kick in at these settings. Anything lower/slower than that makes it lag behind too much as it processes frames.
      [I usually use Superfast]

      While Zero Latency is pretty much required for live game recording, Fast Decode is not entirely needed, especially if you have a faster rig to power the game and record at the same time on. My computer isn’t even top of the line but it can handle NOT using Fast Decode (which disables CABAC, and a couple other things). CABAC can have quite a bit of an effect on quality, and since it doesn’t seem to have a huge performance hit, I use it. Fast Decode also disables Deblocking and that leads into my next setting…
      [I always use Zero Latency]
      [Even though it helps with speed, most of the time I don’t use Fast Decode]

      The only other thing I change in the interface is deciding on the main Rate Control type and Rate Factor. In my own tests, CRF seemed to have the least amount of effect on framerate out of them all, and I fluctuate on what CRF I use, depending on the game I’m recording and what the recording is for. If I’m recording a high-quality test, of course it will be a low CRF, but it need not be a 1 to look good. I am quite satisfied with a CRF of 15-18 for decent-quality captures. The bitrate of a 1080p capture at that CRF ran about 45,000kbps, which is a high-quality BluRay movie’s bitrate. For just average gameplay for fun, I usually run a CRF of 21 up to 23. The quality is ‘good enough’ then, especially with a low Deblocking setting helping out (the Preset of Superfast leaves Deblocking “On” at the default 0:0 setting). I don’t recommend going below CRF23, with deblocking or not, as it just becomes too ‘garble-y’, to use a more technical term… Web broswer/low-motion games or hard-edged/animated games that look like Minecraft also need a higher bitrate (lower CRF), so that the hard edges aren’t messed up and the smooth/flat areas aren’t too compressed and get ‘blocky’.
      [I use a CRF in the range of 18 for higher-quality capturing, going up to 23 if disk space is low, and don’t suggest higher than 23, so that quality doesn’t suffer too much] 

      Nothing else need be adjusted in the Official x264/red logo interface, but I sometimes add “–keyint 50” or “–keyint 20” into the area (no quotation marks) ‘for advanced users’ at the bottom. This is a command that will force a keyframe/I-frame after that many frames have gone by. This helps to keep the seeking time low when editing and allows for closer cuts when not recompressing the clip when editing. If you having a problem with editing MPEG-4/AVC files, try using a –keyint setting of “1”, so that every frame is an editable/seekable keyframe. A higher GOP is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info). You may want to increase the bitrate to keep quality then though, as the codec can’t really compress/do much of it’s ‘magic’ then, without room to work between frames. As stated above, the optimal codec for editing is MJPEG, but many do not like the quality (try turning it up to 100%).
      Leaving it blank and not using any “–keyint” command will allow the codec to use many more frames (250 is the default I believe) for compression and the resulting recorded file size will be very small.

      For the Unofficial (“Complicated”, black x264 logo) interface:

      The first tab is just the Rate Control setting. CRF seemed to have the least effect on framerate.
      I also sometimes add the –keyint setting to the command box at the bottom, just like I talked about a couple paragraphs up.
      [I use a CRF in the range of 18 or less for higher-quality capturing, going up to 21 or if disk space is low, up to 23 at the most and don’t suggest higher than 23, so that quality doesn’t suffer too much]

      For the second tab, there is a lot to change, but I mainly talked about why up in the article, so I’ll just state what I like to use here, after this paragraph on Deblocking:

      Deblocking can be forced to ‘leave things in’/keep details, by using a negative value, especially when dealing with effects such as film grain and minute details and noise; but for the most part deblocking will ‘smooth things out’, especially trying to hide where a lot of detail has been lost, where compression artifacts like Macroblocks and Gibbs Effects (mosquito noise) around edges would show up. I don’t recommend putting deblocking up too high though, as it can really make things downright blurry. With deblocking completely off, all of the detail is kept, but many things can look like they have a ‘wood grain’ pattern on them. With a high bitrate/low CRF, there is no need for deblocking at all anyway, as there would be a lot less compression/artifacting. When recording a high-quality test or something like that, I leave it off. When just recording random gameplay or myself doing something, I turn it on at a low setting, to help with keeping things looking slightly more ‘clean’.
      [I use Deblocking at 1:0 (CUDA default) up to 3:0, when I use it, but any more and things start to look ‘too smoothed out’ to me]

      For this second tab then:
      [No Partitions (all unchecked, Fast P-skip checked, 1 Max reference frame, ME algorithm on Diamond, ME range of 4, Subpixel ME refinement of 0 or 1 (any higher causes more lag), GOP size of 20 or 50 (this is the –keyint setting from above, higher is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info), No Weighted P-frames, Max consecutive B-frames to 0 (none), In-loop deblocking filter unchecked (off) or checked (on) with a 1:1 deblock, CABAC on (it’s slower for less-capable systems), DCT decimation checked (on), Trellis set to Off]

      In the third and last tab of the Unofficial (black x264 logo) interface, I sometimes set a VBV max bitrate of about 40000 (kbps) just to keep the filesize down, especially when I’m going to edit and recompress for uploading somewhere (which usually gets rendered out for upload at that bitrate or lower anyway), it looks ‘good enough’ for me (this also requires a buffer of some sort, to allow it to check the bitrate as it goes up and down, so I put in 4000 or 10000 if I set a VBV max bitrate)
      [No maxbitrate usually, unless you want to save some harddrive space (eg. 50000k)]

      That’s all I change for both of those interfaces, from their defaults, as of the time of this post. 
      Keep in mind that as games are updated and Re-Optimized, drivers are Updated, and new hardware is released/purchased, I may change these settings (and I advise you to try some tests too, if you wish, when things change). Also, I am not a stickler for the utmost quality and don’t mind things getting compressed a bit, so you might want tighter/higher settings. 
      Mainly, I hope that this info helps some of you to either record with less lag (many people report that with more optimized MPEG-4/AVC settings they have less apparent lag) or just learned some terms and concepts that may help when editing and compressing your own videos/shows/etc and overall just help you record better/smoother. I actually enjoyed testing all of these things out and learning about it and I hope it helps anyone that is recording their gameplay adventures.


      See you in the games!

      DESIGN ROOM HOTEL LE ROYAL MONCEAU

      DESIGN ROOM HOTEL LE ROYAL MONCEAU

      DESIGN ROOM HOTEL LE ROYAL MONCEAU

      Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

      37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

      WORKOUT ANYTIME on CNN Money

      WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

      What’s next for Blockbuster’s empty stores
      By: Patrick deHahn

      Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

      Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

      (Read More)

      What Kind of Protein is Best?

      There is a lot of confusion about “superior” and “inferior” proteins—so called “complete” and “incomplete” foods. At the beginning of the century, researchers doing animal experiments discovered that rats could live and grow on a single food such as eggs. Eggs, like meat, fish, and cheese, were therefore dubbed “complete” proteins. Vegetable foods such as rice, legumes, seeds, nuts, corn, and wheat were called “incomplete” since on their own they were unable to maintain life and growth. What all this meant is that the so-called “complete” proteins contain all the eight acids which humans cannot make for themselves in adequate amounts. But what they didn’t take into account is that vegetable food—say, corn— together with another—say, red beans—also contains the eight essential amino acids and, provided you eat one vegetable together with another, you are getting the full complement of the eight essential amino acids in good balance. Better still, you are getting them without the fat that accompanies protein from animal foods. The idea that we need animal foods in order to be healthy is simply untrue. Populations numbering in the millions in different parts of the world have lived and developed enviable health and strength for thousands of years on a purely vegetable diet.

      Diet Start

      The best—and often the cheapest—sources of protein are the unrefined, unprocessed vegetable foods—complex carbohydrates complete with their natural fiber content, vitamins, and minerals—whole grains such as rice, wheat, oats, barley, legumes including lentils and beans; mixed seeds or mixed nuts; fruits, and vegetables from salad greens to carrots and potatoes. Eaten together in salads and casseroles, bread and soups, they provide low calorie menus without the danger of high fat from the intake of animal foods. The Lifestyle Diet provides 15 percent of your daily calories in the form of protein. It allows you to eat four ounces of meat, fish, or poultry (preferably fish) three times a week. On the days when you choose not to eat these foods you can have instead four ounces of mixed nuts or two eggs. It completely eliminates all cheese except those such as cottage cheese and curd cheeses made from low-fat milk.

      If you prefer, you can take all your protein from vegetarian foods. The question of a vitamin B12 deficiency on a vegetarian diet is always brought up as evidence of the need to eat meat, although long ago biochemist Schweigert of the American Meat Institute researched the question and discovered that the need for B12 rises and falls with the amount of protein eaten. B12 is available in dairy products and eggs included in the Lifestyle Diet. In this kind of protein-economical diet it is correspondingly low. Schweigert also discovered that the whole wheat grain is a usable source of B12 provided it is not processed into white flour. If it had not been, then the millions of people in different countries who have lived almost exclusively on a vegan diet (vegetarian with no milk, dairy products, or eggs) would have suffered B12 deficiencies.

      And More: Deals and Sales – End Of The Month Specials (February)

      The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

      Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

      Sniper Elite Nazi Zombie Army Sale Page
      Sniper Elite Nazi Zombie Army 2 Sale Page

      also on sale
      Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
      Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
      Alternativa is on sale for only $1.29 (90% off)
      The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
      Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
      Moto GP 13 is $12.00 (70% off)

      Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

      (click image to see Full Size)

      also on sale
      Bioshock is $4.99 (75% off)
      Bioshock 2 is $4.99 (75% off)
      Bioshock Infinite is $9.99 (67% off)
      Borderlands, Game Of The Year Edition is $7.49 (75% off)
      Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
      Duke Nukem Forever is $4.99 (75% off)
      Civilization V is $7.49 (75% off)

      GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

      (click image to see Full Size)

      also on sale
      Call of Juarez: Gunslinger is $9.72 (46% off)
      with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
      Sniper Elite V2 is on sale for $7.50 (75% off) or get the
      Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
      The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
      and last but certainly not least
      The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
      Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

      Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

      Workout Anytime in Global Atlanta

      Workout Anytime in Global Atlanta

      WORKOUT ANYTIME was recently featured in Global Atlanta. The article highlights Atlanta based fitness center chain, Workout Anytime adding its first location in Canada this fall. It mentions the new location in Calgary, Alberta scheduled for an October opening. Randy Trotter was quoted about the success Workout Anytime is planning to bring Canada. It also mentions Dustin Taylor and Jeff Gellatelly are the mast franchisees for the new location and grants them rights to open Workout Anyime centers in the provinces of Alberta and Saskatchewan.

      You can view the full article here. 

      Food Repair Guide: Baking Part 2

      Swiss roll

      If you are making a Swiss roll, then line the tin with greaseproof paper, but do ensure that you grease the paper well before pouring in the mixture. Try also to ensure that the oven shelf is level or all the mixture will run to one side. If it does, all is not lost, although it will be rather difficult to roll. When you turn the Swiss roll out, do so onto a tea cloth or piece of greaseproof paper that has been coated well with icing sugar. If not well sugared, the Swiss roll will stick to the cloth or paper and you will have a terrible time rolling it. If you have not greased the paper properly, you will also have a terrible time peeling it off, but patience will usually win the day. Do not worry if the roll is not entirely perfect. As long as you can keep about one third of it intact, that will do for theoutside and no one will see the inside. Dredge it thoroughly with sugar or icing sugar. Or, if it has really fallen apart, pre-slice it before serving so that no one can see.

      Failed sponge cake

      If, despite your best endeavours, your sponge cake, be it light or rich, is dry, crumbly, flat, lumpy or generally unappealing, do not throw it out. If you are desperate for a complete cake or dessert, cut the sponge into very thin layers, sprinkle each with a little liqueur if for a dessert, and layer very generously with filling so that the cake gets smothered. Then top or ice equally generously and no one will ever know. If you do not need the cake too urgently, keep it to make trifles, tipsy cakes or anything that needs a sponge base. Buried deep enough and soaked comprehensively enough, even the most revolting cake will become quite palatable. Alternatively, crumble it and use it as a topping. When toasted, the crumbs can be used as decoration for almost anything in need of disguise.

      Diet Start

      This does not apply only to plain sponges. Orange or lemon sponges would be a delicious base for any cream dessert, chocolate, coffee or even gingerbread can be used as a base for ‘a trifle with a difference’. Indeed, coffee and chocolate cake could be sliced into fingers, thoroughly dried out in the oven and sandwiched together with some butter icing as biscuits. Any of the above could be used as the base for a baked pudding, but remember that the cake will be sweeter than bread or rice so reduce the amount of sugar.

      Failed fruit cakes

      Failed fruit cakes are just as adaptable.

      Rich fruit cakes often get old and dry out. Do not abandon them to the birds. Cut deep slits in the top of the cake and feed with a mixture of brandy and sherry, or, if you do not want to be too alcoholic, a fruit wine or good fruit cordial. The amount you give the cake will depend on how dry it is, but you can always cut it in half and test the middle.

      The same principle can be applied to lighter fruit cakes although one needs to be more temperate. A large quantity of fruit will soak up the liquid and make the whole mixture moist but sponge will merely become soggy, so the greater the proportion of sponge to fruit the less liquid it should be given. It is usually better to ice the cake after it has been — to conceal the tell tale signs.

      If a rich fruit cake really is dry beyond redemption, break it up in a bowl, add some suet and a goodly measure of liquor, leave it to soak for 24 hours, then squash it well into a bowl and steam it as a Christmas pudding. It will be a little crumbly and somewhat lighter than the standard, but many people prefer it that way!

      Icings

      The disaster-prone cook should steer clear of all but glace, butter and royalicing — fondants and their kind are for those with time and expertise to spare.

      Glace icing

      Glace icing is quick and simple but messy. It is not easy to get the proportion of icing sugar to liquid right to achieve `spreadability’ without `runability’.

      Always put whatever you are going to ice on a rack so that the extra can run off without getting stuck in a thick frill round the bottom of the cake. Arm yourself with a pot of boiling water and several metal spatulas or flat knives to smooth out the lumps. Inevitably, the wretched stuff will never quite cover the top of the cake in the first run, and when you add the next bit, the first will have dried and the whole thing will go lumpy. Only practice is going to perfect your technique, but smoothing with a spatula dipped in boiling water does help.

      Always be ready to decorate or disguise the top with something other than icing — even if only gold and silver balls. Grated chocolate is a good alternative.

      Marbling

      Marbling the top, if it is reasonable, will distract the eye from any minor blemishes and is easy and impressive in itself. Run a little melted chocolate, or different coloured icing, in parallel lines across the top of the cake. Then, before it is dried, take a knife point and pull it across the cake top in straight lines at right angles to the first lines, thus pulling the lines into a feathered shape. Try it a couple of times on greaseproof paper before you launch into the cake.

      If all fails and you make a complete mess of the icing, wait till it is dry, then scrape the whole lot off and start again.

      Butter icing

      Butter icing is the world’s easiest, but it is very rich. Many people prefer to use shortening as the fat base, which keeps it much lighter. The only hazard with butter icing is to get enough flavour into it. Like brandy butter (which is, of course, only a butter icing) nothing is nastier than a butter icing that tastes like sweetened butter. Therefore, taste after you have followed the recipe. If you have used a particularly strongly flavoured butter, you will need more chocolate, lemon or whatever you are using. Never try to spread it straight out of the fridge.

      Royal icing

      Royal icing is also simple, using egg white rather than water or syrup to moisten the icing sugar. Add a little lemon juice to counteract the sweetness and do not forget a drop or two of glycerine to prevent it hardening totally. If you do have a cake with unglycerined icing, you would be better advised to saw your way through it with a bread knife rather than to try and cut it, when it will shatter and ricochet all over the drawing room and Great Aunt Ethel. Royal icing can always be broken off and replaced with a new batch. Use a small amount of icing to experiment with the colour.

      LIVING ROOM DESIGN IDEAS GET COMFORT

      LIVING ROOM DESIGN IDEAS

      Living room is the most popular rentals for guests and where families come together to end their days of rest after a long week at work or enjoying a TV program together. In most cases, this room is on the floor of a house and is very active. It is therefore essential that this area is decorated in a pleasant environment to ensure the comfort of visitors. When planning a room design, the main and most important factor to decide is the purpose of the room. One thing to remember when designing your living space is that you should feel comfortable in the room and the style, since they will likely spend most of their time in the room. Finally, here are some design ideas that show really got in touch with the style you want.

      LIVING ROOM DESIGN IDEAS

      LIVING ROOM DESIGN IDEAS

      LIVING ROOM DESIGN IDEAS

      LIVING ROOM DESIGN IDEAS

      My Trip to Manila, Philippines

      The assignment in the Philippines is to review a Strategic Plan which has been developed with the assistance of another consultant. On first glance of the plan it was not constructed in a logical way. The SWOT analysis was not used to look at strategic options. The whole plan is just a list of SWOT elements and clubbing of current activities in to 12 areas of work and finally selecting 6 areas which they call strategies and allocating opportunities and threats that are relevant to these selected 6 areas. They have not used the strengths and weaknesses.

      The previous consultant does not seem to have a grasp of the logic in strategic planning; the need to start with the external factors that influence the organization and then move inside the organization.

      The staff of the organization also seems to be very new to planning let alone strategic planning and have an aversion towards prioritizing and selection. As usual they seem to want to do everything. So all in all the previous plan does not have a logical flow as well as the choices the organization has made in order to mobilize resources and achieve the mission.

      My task of reviewing the strategic plan was made a lot more difficult as there were representatives from a funding organization who along with the staff thought they knew everything and in reality they “did not know what they did not know”. I some times wonder why they hired an expert if they think they know everything.

      They are more interested in retrofitting “logic” in to the current plan! Go figure! In effect they want to create a strategic plan breaking all the rules. I had a tough time to pull them into the right path. It seems that the organization/staff are not willing to change their current operating mode of adhocracy to a more strategic, structured logical way. So I explained that until the willingness to change is there the strategic plan will continue to be just a piece of paper.

      Now I have to do the documentation. Hope to finish it as soon as possible. Looking forward to returning to Colombo; Manila is too noisy for me and for some strange reason I do not seem to like Manila. Well I have finally found a city that I do not like.

      WORKOUT ANYTIME in Albuquerque Business First

      WORKOUT ANYTIME in Albuquerque Business First

      WORKOUT ANYTIME VP of Development Randy Trotter was recently featured in the Albuquerque Business First. The article begins with information about WORKOUT ANYTIME and why Albuquerque is ripe for the concept to enter the market and grow. Randy is quoted about the franchise opportunity and they provide information about financing needed to open a location. The article goes on to touch on the real estate footprint. The article is ended by providing Randy’s cell phone number for anyone interested in a franchise.
      You can view the full article here.
       

      Number Talks Chapter 1 – Thumbs Up for the Silent Thumb

      I’m linking up with my friend Misty over at Think, Wonder, & Teach for her summer book study of Number Talks: Helping Children Build Mental Math and Computation Strategies, Grades K-5

      Given that I’m wrapping up a K-5 Math Endorsement this month, this is a timely book for me. I love to teach math far more than I ever anticipated that I would when I entered this profession, and I really enjoy getting students to share and discuss their mathematical thinking. I’ve noticed, however, that many students lack strong mental math and computation strategies, relying instead on memorization to get them by. By the time they get to 4th grade, that’s not really a viable strategy anymore. They’re starting to work with much larger numbers, and they subsequently have more parts and steps to keep straight in their heads. If they don’t have great mental math strategies going, then it’s likely to become a mess pretty quickly. They can always solve problems on paper, but unless they have the good number sense that goes with doing mental math, they’ll never be able to gauge the reasonableness of their answers. In those regards, this book seems like a great idea.

      Chapter 1 really just introduces the concept of a number talk, and Misty does a great job summarizing it, so I won’t go into that here. One of my favorite teaching ideas from the book so far, however, was the idea of the “Silent Thumb.” When students are given a mental math problem, they need some “think time.” But every class has 2-3 students who are super math-letes who have the answer before the rest of the class has even processed what problem they’re being asked to solve, and those kids with their proud “I know! I’ve got it!” hand-waving typically end up dominating the conversation. The “silent thumb” solves that problem. All students hold their hand in a fist over their chest as they solve the problem. When they’ve got an answer, they move their hand from a fist to a “thumbs up.” They then think of another strategy to solve it while the other students are thinking, and for each additional strategy they come up with, they extend a finger. Awesome, right? I love how this gives all students some think time without creating pressure for some kids to hurry up because the fist is held close to the body — not waved in the air for everyone else to see. It also validates those super math-letes for their mathematical thinking by allowing them to communicate to the teacher that they have multiple strategies for solving the problem. And if they don’t have multiple strategies, then they have something to think about while the others are working.

      I’m definitely interested in learning more about Number Talks, and I’m excited to delve into this book a bit more. I’ll be posting more about this book in the weeks to come as I link up with Misty’s book study.

      If you don’t currently have a copy of Number Talks, you can still read the first chapter online. The book is a little bit pricier than most professional development books, but it comes with a DVD full of examples and it has a lot of resources packed in the text. If you’re looking to increase students’ mental math abilities, then this could be a great resource to use.

      Be sure to check out Misty’s Number Talks chapter 1 linky party where you can add some ideas of your own or read what other teacher bloggers are saying about the book. I promise you’ll find some great ideas there!

      And click here to see my review of Chapter 2!

      Have you ever done Number Talks in your classroom? I’d love to hear about your experiences in the comments section!

      Thanks for reading,

      It’s Not Just You ™ – Heroes Of The Storm ‘Screen Shake’ = ‘Motion Sickness’ (Dizzy, Nausea, Headache) [Notification]

      Just a quick post to let others know that – if you are experiencing this phenomenon – getting dizzy or even nauseous while playing Heroes Of The Storm lately: It’s Not Just You™… I even whipped up an Example of the effect, for those that aren’t quite noticing it:

      Example of ‘the screen shake effect’ I made, in GIF format
      (Click to see slightly larger Full Size)

      I first came across this in the Official Heroes Of The Storm Forums at Battle.Net. It was originally posted by “Phoenix” a couple of weeks ago, here. Although I have seen it personally in-game (noticed it), I have not suffered the nauseating effects that many may/do suffer with this Special Effect the game offers – even though I have experienced ‘game motion sickness’ from other games. [I did notice when testing and creating the above Example, that it made me slightly queasy however..]. Mainly, I have ‘been lucky’ with not experiencing it because I do not normally play the Heroes that have/produce this effect (the ‘screen shake’ effect). Here is a list of all the Heroes and Spells that can produce this effect, thanks to a helpful post by “Hatsoz” on the Official Forums:


      Spells with Screen Shake
      Zagara – Nydus Network (R)
      Genji – Swift Strike (E)
      Sgt. Hammer – Concussive Blast (W), Blunt Force Gun (R), Napalm Strike (R)
      Gazlowe – Deth Lazor (W)
      Lucio – Soundwave (Q), Sound Barrier (R)
      Valeera – Blade Flurry (W)
      Zul’jin – Twin Cleave (W), Guillotine (R)
      Ragnaros – Sulfuras Smash (R)
      Alarak – Lightning Surge (E)
      Cho – Upheaval (R)
      Karazhim – Radiant Dash (Q) (Only with Volley of Blows Talent Lv. 16), Seven-Sided Strike (R)
      Anub’arak – Burrow Charge (E) (Upon resurface)
      Li Li – Water Dragon (R)
      Diablo – Shadow Charge (Q), Fire Stomp (W), Overpower (E)
      E.T.C. – Face Melt (W), Stage Dive (R) (Landing only)
      Falstad – Hinterland Blast (R)
      Kerrigan – Impaling Blades (W)
      Muradin – Thunder Clap (W), Dwarf Toss (E), Haymaker (R)
      Sonya – Ancient Spear (Q) (On Hit), Leap (R)
      Stitches – Slam (W)
      Tyrael – El’druin’s Might (Q) (On sword landing), Angelic Flash (Q) (Teleport to sword), Judgment (R)
      Uther – Hammer of Justic (E), Divine Storm (R)





      Heroes with No Screen Shake
      Valla
      Tyrande
      Lunara
      Kael’thas
      Zeratul
      Cassia
      Probius
      Varian
      Samuro
      Zarya
      Auriel
      Gul’dan
      Medivh
      Chromie
      Tracer
      Dehaka
      Xul
      Li-Ming
      Greymane
      Gall
      Artanis
      Lt. Morales
      Rexxar
      Leoric
      The Butcher
      Johanna
      Sylvanas
      The Lost Vikings
      Thrall
      Jaina
      Azmodan
      Chen
      Rehgar
      Murky
      Brightwing
      Tychus
      Abathur
      Arthas
      Illidan
      Malfurion
      Nazeebo
      Nova
      Raynor
      Tassadar

      I experimented with every single Graphic Setting available in the game (eventually running it on the Lowest Possible Settings) and could not find a Setting that disabled this effect…. I first tried Physics, then other effects-affecting settings, such as Shader level, and more, until everything was at the lowest possible Settings and still the effect appears in-game.

      I even looked through the game directories (folders) for some sort of editable configuration file, but the only ones present were ‘protected’ by Blizzard, by being compressed or encrypted in their own proprietary encapsulation of some sort (which renders the files not easily readable or editable by normal means – this is understandable, as they do not want their game easily ‘hacked’ or negatively affected by end users).

      So, for now – unfortunately – there is no solution for this, for sufferers of this effect. The only recourse, until Blizzard puts in an option to Disable Screen Shake, is to avoid the Heroes that produce this visual effect.



      Just letting Sufferers know: It’s Not Just You™!
      [I will try to remember to return to this Post and Update it once Blizzard adds this option – or a workaround is found]

      Kaatsu aka Blood Flow Restriction Training

      Kaatsu training was developed in Japan five decades ago.  Ka means “additional” and atsu means “pressure.” An English layman’s term for the practice is “blood flow restriction training,” and involves performing strength training exercises while restricting blood flow to the extremity being worked.

      A significant benefit of the method is that you can use just 30 to 50 percent of the weight you’d normally use while still reaping maximum benefits of resistance training. You use less weight but do more — up to 20 or 30 repetitions versus 8 or 12 in most traditional strength training programs.
      Cuffs or bands are used that are just tight enough to allow arterial blood flow but not venous flow. This causes lactic acid and other waste products to build up, giving you the same benefit as heavy lifting without the dangers associated with heavy weights. For this reason, it’s a great strategy for the elderly and those who are recuperating from an injury.

      Scientists believe that restricting venous blood return can dramatically boost growth hormone secretion, reducing myostatin and inducing cell swelling.    Even better there is less overall tissue damage compared to traditional high intensity resistance training.

      History of Blood Flow Restriction Training

      The history of this type of training was detailed in an Outdoors Online Article (https://www.outsideonline.com/2023016/you-should-probably-try-japanese-blood-flow-routine):

      “Kaatsu came about in 1966 when 18-year-old [Dr.] Yoshiaki Sato, now a doctor, noticed the intense ache in his calves after having assumed the traditional Japanese sitting position during a typically long Buddhist ceremony. It was an ache much like the one he experienced after lifting weights — an ache he realized had to do [with] the occultation of blood circulation.
      Eureka! Using himself as a test subject, Sato spent the next several years perfecting a system of blood-flow moderation using bicycle tubes, ropes and straps. He later replaced the tubes with thin computer-controlled pneumatic bands. The idea was to apply pressure around the arms and legs while lifting a light load, safely impeding the flow of blood to exercising muscles.
      Slowing this flow engorges the limbs with blood, expanding capillaries, engaging muscle fibers and raising lactic acid concentration. But — and here’s part of what makes Kaatsu unique — it fools the brain into thinking it’s being put through a vigorous workout.”

      Kaatsu training can stimulate muscle growth and strength in about half the time, using about one-third of the weight, compared to regular resistance training.

      How does Kaatsu Work?

      The concept idea behind blood flow restriction training is to restrict blood flow in an exercising muscle/s using a band around the upper portion of the arm or leg being worked. This creates a metabolic disturbance that has local and systemic effects:

      1. A reduction in the partial pressure of oxygen and increase in the acidity of the muscle tissue stimulates protein synthesis through an adaptive response to the stressor.

      2. The central nervous system also senses the challenge and compensates by increasing sympathetic tone, heart rate, ventilation and sweating.   There is also an accentuated hormonal response as mentioned previously.

      Kaatsu also stimulates mTOR signaling and lowers myostatin (myostation stops muscle growth!)
      Unexpectedly muscle growth occurs both sides of the cuff even though blood flow is only restricted on the side farthest away from the heart.    The systemic increase in Growth Hormone also drives overall muscle growth.

      How much Pressure?

      It is important not to restrict blood flow too much, as this could lead to injury and fainting.
      The good news is that research shows that if you use common sense the risk of using too much pressure is easy to minimize.  Your limb should not be tingling, turning red, blue or purple, and you should not lose feeling and should be able to feel your pulse in the limb.
      For a great quick start guide to Kaatsu click here:  https://www.kaatsu-global.com/quick-start-guide-001/
      Kaatsu Training Protocol

      A typical training session uses three sets 0f 20 – 30 repetitions per set. use half or less of the weight you’d normally use. Rest between sets is short with typical rest time being 30 seconds.

      Could Kaatsu Cause Injury such as Deep Vein Thrombosis?

      Kaatsu is NOT the same as putting a tourniquet on and if you follow proper precautions is quite safe.    The key is that Kaatsu does NOT alter arterial blood flow as described previously.    It is important to use cuff’s designed specifically for this process.
      Contraindications for Kaatsu

      • Women who have had a mastectomy with or without radiation and/or an axillary node dissection should not use blood flow restriction training.
      • People in hemodialysis who have arterial venous fistulas. Avoid doing blood flow restriction on the affected limb
      • Pregnant women should not use Kaatsu training.

      Battlefield Hardline: Beginning July 15th, A Double XP Boost is Active ! [Notification]

      Just a quick notification to notify those interested in Hardline to note that a Double XP Boost is Currently On! Note that the notification was noted on Battlelog, as of July 15th – unfortunately, I cannot tell at this time if it is a Premium-Only Boost or a Double XP Boost for ‘Everyone’, as I recently subscribed to Origin Access (to test it for one month, to see whether you ‘lose’ patches/etc that you have earned while it is ‘on’, which I will share as soon as I find out). Still, check out Battlelog and see if it is ‘on’ for you! http://battlelog.battlefield.com/bfh/ GOGOGO

      See You In The Game!


      [Update: As of July 20th, the Double XP Boost is now over… See you next time!]

      a friendly stopped by to say hello, at 5000 feet

      The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

      Back to School – Math Edition

      It might be time to think about renaming my blog, because I’m really excited about teaching math this year! It all started when I read the book Number Talks over the summer.

      I’ve always understood the importance of mental math and computation strategies, but I’d never really understood how to teach it. It felt like something kids either had or they didn’t. This year, however, I decided that we’d start doing number talks from day #1, and I’m already blown away by how my students are developing as mathematical thinkers. They’re able to solve complicated addition problems in their heads — no paper allowed — and they’re articulating their strategies well. I’ve been introducing a new strategy every 2-3 days, and it’s been awesome. We’ll be moving on to subtraction strategies in a few days, and I have high expectations for that to.

      To help students with the mental math strategies, I made a set of posters that describe each strategy with an example of how it works. There are 20 posters in all — one for each strategy described in the book.

      The complete set is available in my TpT store, and they’ll be on sale for 28% off this weekend as part of the Teachers Pay Teachers back to school sale if you use the code BTS13.

      As I’ve been working on order of operations and number sense with my fourth graders, I also introduced the four fours problem. The premise of the problem is this:
      Using some arithmetic combination of four 4’s, can you write an equation for each of the numbers from 1-100? Here are the rules:
      • You may use any combination of addition, subtraction, multiplication, and/or division
      • You may combine numbers, e.g., use 2 of the fours to make the number 44
      • You may insert decimal points
      • You may use a four as an exponent
      • You may use square roots
      • You may use factorials, e.g., 4! is equivalent to 4 x 3 x 2 x 1 = 24
      • You may use overbars to make a decimal repeat
      • You may NOT use any digit other than a four
      • You MUST use all four 4’s in each solution

      Before I go on, let me give two caveats. 1) I didn’t expect all of my students to be able to handle all of these rules. Square roots, exponents, and factorials are WAY above my fourth graders heads generally, but I did have a handful that could handle it. And there are plenty of solutions to be found that don’t require those operations. 2) This problem freaked out the parents more than it scared the kids, I think. I had a few panicked parents that I had to talk down while we were working on this, but in the end, it was well worth it. My students were so excited about math and problem solving as we worked through this problem. It was homework each night to try to find a few more solutions, and then we’d add to a chart during math class. Look at all that my students accomplished after just two days!

      We’ve filled in a bunch more solutions since then, but of course I left my camera at school this weekend…
      Finally, in honor of the big back to school sale on TpT, I’ve bundled four of my favorite math resources into a back to school math pack for this weekend only. 
      Sold separately, this is $17 worth of products that I’m selling this weekend for $10, but after Monday, the bundle will no longer be available in my store. So if you’ve had any of these on your wish list…

      Hope everyone had a great week! I’m still learning how to juggle grad school with teaching, but I’m hopeful that I’ll still be posting at least once a week.

      Off to start catching up on blog reading and filling my cart for the TpT sale! Have a great weekend!

      Managing the Work/Rest Ratio in HIIT Training

      High Intensity Interval Training aka HIIT training is all the rage and there are many different HIIT training protocols available, but to produce the best results it is important to understand how to manipulate the Work/Rest Ratio.    The Work/Rest Ratio is the ratio of time spent working in the high intensity interval to the time spent in the recovery interval and there is no one ideal Work/Rest Ratio. In fact there are three distinct methods you can use to design interval training programs based on how you manipulate the Work/Rest Ratio.
      Fixed Work, Fixed Recovery
      This is the most common method and often used for group training because it keeps everyone working together.   In this method the amount of time spent in the work phase is fixed as is the amount of time in the recovery phase.   For example the ever popular “Tabata” Protocol is a fixed work, fixed recovery protocol using 20 seconds of work and 10 seconds of recovery done 8 times.    Another example is the Sprint 8 protocol which uses 30 seconds of work and 90 seconds of recovery.  In addition, all MX4 programming uses this method either for a 60/30 work/rest ratio or a 4 to 1 Minute Work to Rest Ratio during Density Workouts.
      Needless to say there are endless variations of fixed work, fixed recovery interval protocols and each one feels different and allows for a different level of relative intensity.    The advantage of these type of protocols is that they are very simple to design and very easy to track using a simple timer, and if using heart rate monitoring you can adjust the actual work intensity and recovery intensity based on individual heart rate response.   Also this is a very easy way for a trainer to manage a group as mentioned previously.
      Fixed Work, Variable Recovery
      In this method the amount of time spent working is fixed, but recovery time varies based on heart rate response.  This method is a more individualized way to do HIIT training where each work interval begins after the heart rate slows to a predetermined point correlated with a specific level of individual recovery.  The advantage of this method is it can be customized to each person based on their goal, age and current fitness level.   An example would be doing a 1 minute work interval with a fit 20 year old and setting the recovery threshold at say 120 beats per minute (a relatively low exercise heart rate for a fit 20 year old).  So he would work as hard as he can for 1 minute then go into recovery and stay in recovery until his heart rate slows to 120 beats per minute.
      Variable Work, Variable Recovery
      This method varies work time AND recovery time based on preset work heart rates and recovery heart rates.   For example using the same example of a fit 20 year old you might set a goal work heart rate threshold at 180 beats per minute – meaning that you keep him working hard until his heart rate hits this work threshold and then immediately begin recovery.    Then you would keep him at a reduced work rate until he hit a predetermined recovery heart rate threshold such as 120 beats per minute.    This is a highly sophisticated and highly individualized way of exercising with precise management of work and rest customized to the individual.
      Have some fun and experiment with each of these to prevent plateaus in your workout progress!

      NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

      NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

      Good ideas that we can see these concrete houses the Netherlands have been totally inspired and inspiring call to us to try. Most of the ideas that we can see the space was not available outside of this house. concrete material, which come from the use of brick and stone was looking for a huge ornate and extraordinary. We can try to come to our ideas to make this house looking for a pleasant as well as ourselves and our families.

      The concept of an interior provides ample room to combine the ideas. Integration space that stands between the living room, dining room and kitchen area is desirable for those who like social live and love to watch their children. These applications are rustic room in search of other great ideas that make us who see this house completely. The decorations of great gold bathroom also feel comfortable. Honestly, the more attractive space in this house was the place of these decorations ideas outdoor dining. Designed by Arjen Reas

      NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
      NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
      NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
      NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

      HOME DESIGN WITH STRONG VISUAL EFFECTS

      Architects honey study apartment has a makeover that is quite original. The project is called “Santpere47” and has many interesting features. gold lines and circles to create a wall decoration that invites a lot of fun to watch.

      HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

      HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

      The ceiling is particularly exciting that the pattern is unusual and reminds one of the chambers of the royalties. Storage space is provided unconventional: not a library under the stairs and walls in some places where objects can be placed. The lighting in this apartment is also interesting to compare a second: the hanging lamps are subtle and elegant, and were impressed by the fire escape. The decorative elements are in perfect harmony with the general atmosphere of the house.

      HOME DESIGN WITH STRONG VISUAL EFFECTS

      HOME DESIGN WITH STRONG VISUAL EFFECTS

      HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

      HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

      HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

      HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

      HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

      HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

      My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

      January 2011

      Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

      The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

      I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

      Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

      December 2010

      It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

      It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

      As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

      You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

      The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

      November 2010

      The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

      I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

      The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

      For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

      Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

      In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

      One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

      As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

      Spotted in a hoarders driverway

      the front yard was covered in a variety of junk.

      Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

      Speedrun – Hitman: Absolution – Contracts (The First Hit)

      After playing through the first Contract (“The First Hit”) properly, I noticed that the only requirements were to kill the target. It didn’t seem to matter if you got spotted or anything else, so I thought – that would be perfect for a Speedrun!

      Level: Hitman (Absolution) – Contracts (The First Hit)
      Time: 21 seconds
      Score: 95,186
      Runs: About 4-5

      After a couple runs of seeing what the fastest path might be (leaping over the log takes more time than running around imo), I changed to a smaller resolution and turned the graphics down to low settings to help with speed. I don’t know if this is the fastest possible route, I just found it worked well instinctively after a few runs.

      Bandicam seems to have some trouble with H:A, the fps keeps popping through, and seems to lag it out a bit. I even tried disabling SLI. I thought it might be my NVIDIA cards, and in the end, I ended up running it on an AMD/ATi HD 6870 even smoother than dual GTX 560Ti’s (this game prefers AMD videocards).

      Good luck with it and See You In The Games!

      TestRun, Video Edition: Recording Gameplay – Rollercoaster Tycoon 2 (Video Samples with Brief Tutorial Video)

      This is a more informal TestRun, where I was merely testing out the perceived quality of some recording codecs while attempting to get gameplay recording of Rollercoaster Tycoon 2 going. As most of you know, recording this game is not just a point-and-shoot affair. Heck, most game recording applications won’t even detect the way it is buffering and utilizing video memory, resulting in a black screen, flashing or very laggy output. After trying years ago and abandoning it temporarily, I was recently searching websites with information on trying it again. With no luck finding a starting point of information, I decided to figure it out on my own – and of course share my findings should anything turn out fruitful…

      First, simply trying to record RCT2 with FRAPS and then Bandicam, turned up nothing as a result. Either it would not detect the screen (it is not using 2D/3D rendering/buffering on the videocard in a standard manner) or it would capture blackness (when trying Bandicam’s ‘Record The Screen’, for instance). Since these are two well-made recording products, I assumed other products would result in the same …result. I also seem to remember trying applications like Camtasia, back in the day..

      So next, I tried good’ol ‘Virtualbox’. A staple Virtual Machine emulator (think of a little computer-running-inside-a-computer), I installed an old version of WindowsXP that I had into the GuestVM. Installing my DRM-free purchase of RCT2 from Good Old Games, I tried recording the screen. No luck, since it wasn’t using Direct3D in a way that I could record (after I finally got Direct3D working in it). I tried playing it in a Windowed VM and recording that. It wouldn’t even run for some reason. It kept trying to ‘take over’ the VM and resizing it. I tried setting my Host Computer desktop resolution to 1280×720 and getting the game to detect that and run it at that resolution, ‘Full Screen’ and ‘Seamless’. Nope. For one thing, the game kept detecting and making available only the most basic of 4:3 aspect resolutions (CRT monitor type sizes), no matter what driver/settings I used for the virtual machine (I of course wanted the more modern widescreen 16:9 ratio, as YouTube uses).

      Third, I tried VMware’s ‘VMware Player’. A free virtual machine app, where the business version (VMware Workstation) is the go-to prog for business virtualization. Installing my XP and then RCT2 into the VM, I got it going in 720p rez and prepared Bandicam to record a “Rectangle On A Screen”. It worked wonderfully. So, with the odd stutter (very few and far between), I can now record RCT2 gameplay and wanted to share my findings of the ability with everyone.

      I was also messing around with different recording codecs, to see what they looked like at different settings with this game at 720p. I quickly threw together this little video showing some settings and results (Sample Video). A summary of what I have set up to record Rollercoaster Tycoon 2 gameplay is just below a short analysis of the video/recordings. Again. this isn’t a ‘full/technical’ TestRun, it is just me sharing some tests I did and showing that one can indeed record RCT2. Further down, there is a video that goes over the steps in summary, then in slightly more detail, showing the steps taken on the screen, a short ‘tutorial’ I suppose. For those who haven’t figured it out or got it working yet, perhaps this information will help you out, too. Enjoy!

      RCT2 testing (codecs/settings) with Bandicam (Samples)

      Recorded with: Bandicam, various quality settings, various codecs @ 1280×720 (720p HD)

      Recorded game: Rollercoaster Tycoon 2 (RCT2)

      Some recording data (per codec) for this test:

      MJPEG @ q80 = 45,000kbps data rate (~330MB per minute of gameplay recording)

      MPEG-1 @ q80 = 11,000kbps data rate (~80MB per minute of gameplay recording)

      MJPEG @ q60 = 34,000kbps data rate (~250MB per minute of gameplay recording)

      MPEG-1 @ q60 = 3,000kbps data rate (~22MB per minute of gameplay recording)

      *XviD and x264 are omitted as results for this test as editing/recompression resulted in corrupted video output (they will be included in a future TestRun with many codecs)

      Brief analysis of sample video:

      • All of the MPEG-1 settings are quite watchable, unless of course the temporal gibbs effects bothers you (the little ‘ghosty/glimmer’ effects that follow around the peeps). Perhaps if I didn’t mention it, you might not have noticed? As with all recording/editing, if it ‘looks fine to you’, then you can run with it if you want. Some people “need” the best quality possible, some can watch any quality and enjoy it. If the MPEG-1 setting at 80% Quality seemed fine to you, go ahead and use that (it is about 1/4 the size of the MJPEG recordings and I have found that editing MPEG-1 is bit slower but quite possible to do in editing applications such as Sony’s Vegas line of products).
      • The MJPEG at a Quality of 50 percent is watchable but messy looking, as expected since a JPG (MJPEG is a series of JPG frames) at only 50% quality would have tons of compression artifacts. 60% is just as bad, with ‘rough blocks’ everywhere (macroblock artifacting). MJPEG at Quality80 isn’t bad and very watchable, but it is much larger in bitrate usage/file size than say, MPEG-1 at the same quality setting (it is about four times larger in file size). It is the easiest codec to edit, however.
      • XviD, an MPEG-4 codec, can potientially looks a lot ‘cleaner’ as it can handle smaller macroblocks/divisions of the screen (inherent in the improvements in MPEG-4 over MPEG-1) – but the output seems to have strong corruption (it leaves ‘trails’ on the screen) when attempting to edit/recompress it into a final product (as seen in the video).
      • x264, a more recent ‘Advanced Video Codec’ version of MPEG-4, it records in wonderful quality and low file sizes – but all of that is hidden behind, again, corruption (‘trails’ left behind on the screen*) and slow editing.
        (The editing can be helped somewhat by specifying a smaller GroupOfPictures (frames inbetween keyframes/information frames, to help seeking through the video.)
        Keep in mind that for the MPEG-4 codecs, the corruption surfaces only when editing/recompressing the source video. The ‘original’ gameplay recording in MPEG-4 is quite clean and watchable, completely fine if you are just going to ‘record-and-upload’ to a video sharing site or personal website.
        *More on this issue and x264 recording in a future article
      • A full Codec Comparison TestRun is coming, where I test out a bunch of different codecs and see how they fare for general game recording, MPEG-1, MPEG-4, AVC/h264 (MPEG-4 Part-10), MJPEG, XviD, RGB24 and more…

        Some related articles:
        Game recording comparison with various codecs and settings (Minecraft)
        http://gametipsandmore.blogspot.ca/2012/10/testrun-video-edition-fraps-vs-dxtory.html
        The ghosting/blurring effect when rendering in Sony Vegas products
        http://gametipsandmore.blogspot.ca/2012/10/and-more-how-to-stop-ghosting-or.html

      There are a couple other ways to do it I think, but here is how I recorded Rollercoaster Tycoon 2 gameplay with Bandicam:

      • Install Windows into a VM Guest (for example, a VMware virtual machine within the VMware Player application)
      • Install RCT2 into that Virtual Machine, running the VM in a window (for example, 1280×720)
      • Set up Bandicam to record a ‘Rectangle On A Screen’ and set the Rectangle to be the same size as the Virtual Machine running in a window (in this case, 1280×720) and line them up. 

      That’s it!

      Tutorial Video on how to record Rollercoaster Tycoon 2 with Bandicam

      I had seen many people on many forums asking for years how to record RCT2 gamplay. I have seen a few videos online now and so some have it working, but if you haven’t been able to get it going or would like to try to make your own Rollercoaster Tycoon 2 videos, here’s how. Good luck with it and have fun!
      See you in the games!

      Becoming a GI Joe

      All carbohydrates have a value on what is known as the `glycaemic index’ (GI), which indicates how quickly that carbohydrate is metabolized by the body and converted into glucose. The lower a food’s GI, the longer it takes to be converted. Foods with the highest GIs are the ones that will have the most profound and immediate effect on your blood-sugar levels. All the carbohydrates on a weight- loss and insulin-balancing regime should come from the lower ranges.

      There are two indexes: the glucose standard, which rates glucose as having a GI of 100 and the white bread standard, which is based on white bread being equal to 100. Other carbohydrates are assigned comparative ratios based on these figures. It doesn’t really matter which index you adhere to, for they both give a pretty good – and sometimes surprising – insight into the speed with which certain carbohydrates are assimilated into the bloodstream.

      Diet Start

      Below are a few GI values of common foods, based on the glucose standard. Of course you are not expected to remember each specific food’s value, so to make things easier, opposite are two simple tables showing you how to classify fruit and vegetables into those with a low GI value (under 20), those with a medium value (20-60) and those with a high value (over 60).

      Density values

      Each carbohydrate can also be evaluated by its density value. This is the amount of usable carbohydrate in relation to fibre and water content – the more fibre and water a vegetable or fruit contains, the less usable carbohydrates it will have. The most dense carbohydrate foods are pulses, wholegrains and starchy vegetables, particularly when they are cooked and their fibre is broken down, these will raise your insulin levels, so always be aware of this. The table opposite contains a list of low-density carbohydrates that should form the basis of your carb intake on a low-carb diet.

      Not only do many fruits feature highly on the GI scale, but a few should also carry a carbohydrate density warning sign. Bananas, dried fruit and concentrated fruit juices are all a bad idea if you are trying to balance your blood sugar levels. It is best to avoid these totally until your blood sugar and weight have normalized, and then carefully re-introduce them into your diet.

      Focus on fibrous vegetables that can be eaten raw or steamed – the type that lose a lot of water whilst cooking. This will mean increasing your intake of leafy green vegetables, such as Swiss chard, green cabbage, kale, bok choy, rocket, spinach and endive.

      Teenager’s Room Rockstar Design For Real RockStar

      Design of this room is reserved for your child who likes to play music and have a dream to be a rockstar. where in this room like rockstar there are some tools to play music, like a music studio in the bedroom. with a very attractive color design coupled with music playing equipment such as guitar, drums and other. expected to design the rooms in such a way to make your child feel more comfortable at home and hone his ability in terms of playing music

      Teenager’s Room Rockstar or Musician Themed

      Teenager’s Room Rockstar or Musician Themed

      Teenager’s Room Rockstar Design For Real RockStar

      Teenager’s Room Rockstar Design For Real RockStar

      Teenager’s Room Rockstar or Musician Design

      Teenager’s Room Rockstar or Musician Design

      Are You Ready for NaNoWriMo?

      I plan to encourage my students to participate in NaNoWriMo again this year. For those of you who aren’t familiar, November is National Novel Writing Month, or NaNoWriMo for short. It’s the month where tell your inner-editor to hush so you can just let the ideas flow on to the page. It’s about getting something done without worrying how perfect it is, because you can always go back and revise in December.

      Last year, as October drew to a close, I introduced NaNoWriMo to my class. I explained the premise, and gave them the option of taking on the challenge. We talked about word count goals and commitment to writing outside of the classroom. Then the fun started. Student after student signed up, each cheering each other on as they dedicated themselves to writing a book. In the end, I think all but two students decided to participate. We had weekly lunch meetings where students could eat and share their writing with friends, and although not all students met their goals, they definitely started to find their voices as authors.

      The Young Writers Program for NaNoWriMo has some great teaching materials to get your students psyched for NaNoWriMo and to teach them about narrative writing in general. You can check out their website at http://ywp.nanowrimo.org/. In addition, there’s still time to order a NaNoWriMo classroom kit which comes with a student goal setting poster, NaNoWriMo stickers to track progress toward a goal, and buttons for those students who participate or finish. The classroom kit is free (and awesome), but they request a $10 donation for the materials — a small price to pay to get your students excited about writing.

      In honor of NaNoWriMo, I’ll be hosting a month-long link-up that will start on November 1 and run the duration of NaNoWriMo. Whether your class officially participates in NaNoWriMo or not, I hope you’ll join me in sharing the great writing work that’s happening in your class. Grab the button, spread the word, and meet me back here on November 1st for a writing extravaganza!

      In the meantime, check out the Educators’ section of the Young Writers Project. I’m sure you’ll find plenty to get you (and your students) excited for a month full of creative writing!

      Who’s in?

      High-quality protein continue…

      Soya’s starring role

      Soya is another star player on the protein front, and although it doesn’t have as high a BV as whey protein, meat, fish or eggs, it has a multitude of health benefits which more than justify its inclusion in a low-carb diet; and it is a great vegetarian option.

      Soya contains all-important isoflavones, which can reduce insulin levels, decrease arteriosclerosis (thickening of the arterial walls) and lower levels of LDL (Low-Density Lipoproteins, or poor cholesterol). It has also been shown to reduce the risk of osteoporosis (softening of the bones), increase bone mass and enhance the body’s ability to retain calcium.

      Diet Start

      Soya is also of particular benefit to women, as the isoflavones it contains mimic the action of the female sex hormone oestrogen. It is believed that a diet high in soya can reduce the density of breast tissue, therefore lowering the risk of developing breast cancer.

      Make it organic

      The quality of the meat and fish we consume has dropped dramatically during the last century. Gone are the days when we were eating meat that came from animals allowed to graze freely on nutritious grass, and fish caught inunpolluted rivers and seas. Today, most farm animals are fed on grains that are high in carbohydrates and omega-6 fatty acids, then pumped full of antibiotics and hormones. And fish are being farmed in restrictive conditions, rendering them more fatty than their wild counterparts.

      The only real answer is to buy the best that you can afford – the organic option being the healthiest and most nutritious. Organic is better because the quality of the food is better. It isn’t loaded with drugs and hormones, isallowed to graze naturally, and quite often comes from wild sources, so that the level of omega-3’s is higher, levels of saturated fats lower.

      Protein Q&A

      Q. Where does whey come from?

      A, Whey comes from milk. During the process of turning milk into cheese, the whey protein is separated from the curds.

      Q. Why use whey?

      A. It contains the perfect combination of amino acids, in just the right concentrations for optimal performance in the body. Both hormonal and cellular responses seem to be greatly enhanced by whey supplementation. If you are trying to increase muscle mass, whey protein is invaluable in building and retaining muscle tissue.

      Q. How do I know how much protein I need?

      A. Easy-just follow these simple calculations. If you are sedentary you need 0.8g protein per kilogram of bodyweight (0.36g per pound of bodyweight). If you are active, you need 1.4g protein per kilogram of bodyweight (0.64g per pound of bodyweight). So a woman weighing 63kg (1401b) who exercises needs 88.2g of protein per day. A woman weighing 63kg (140Ib) who isn’t active would be fine on 50.4g of protein per day.

      Q. Can I have all my protein in one meal?

      A. No, it is best to spread it out over the day, so divide it between your three meals and two snacks. You can do this by having eggs at breakfast, a portion of nuts for your morning snack, some fish at lunchtime, a whey protein shake as an afternoon snack, and finally by including a piece of lean meat in your evening meal.

      WORKOUT ANYTIME Featured in Black Enterprise

      WORKOUT ANYTIME Featured in Black Enterprise

      Zelly Wesson of WORKOUT ANYTIME was recently featured in Black Enterprise. The article discusses Zelly’s opening of his second WORKOUT ANYTIME location. Wesson has been playing professional basketball overseas for the past 15 years, and during his off seasons Wesson has been back managing his WORKOUT ANYTIME locations. Wesson discusses his role in his locations and how he has been successful. 
      You can view the full article here. 

      HOME DECORATING WITH ASIAN STYLE

      Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

      Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


      Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


      Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

      One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

      Raw Gameplay (Unedited) – Battlefield Play4Free (32 Players, Saiga-12 Won from The Daily Draw)

      Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a draw of eight and it will generate an item for you.

      The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

      In this video, I present ‘Raw Gameplay’ (unedited gameplay) of BFP4F after winning a Saiga-12 Shotgun for one day’s usage on my Medic via The Daily Draw. I had joined a 32-player server (running a Rush map) that was nice and full (16 soldiers per side). After getting the kinks out and getting used to the controls again after not playing for a while, I think things picked up as the game went on.. I was soon having fun arming MCOMs and healing and reviving. Near the end, I realized that my Aircraft controls weren’t set/got reset, as my mouse wasn’t ‘inverted’ and I couldn’t fly the helicopter at all, haha.

      Recorded game: Battlefield Play4Free, Online FPS
      Recorded with: Bandicam (Registered Version) @ 864p
      Recording codec: MPEG-1, 70% Quality, 30fps

      This video was also a test of a few things (though not an ‘Official Testing Video’): I was messing around with different settings (resolutions, quality settings) to see how low I could set things before the quality suffered too much. This is of course, something VERY relative and what looks ‘good enough’ to one person, looks ‘like crap on a cracker’ to another person. What I was testing here was, what seemed good enough to upload to YouTube (since it recompresses anyway) and still be enjoyable, while making the recorded file as small as I could via Quality settings (which limits the bitrate somewhat) and resolution size (the larger the resolution, the more bitrate/filesize that would be required).

      As I have stated in earlier articles talking about Quality, Bitrate and Filesize, I still find that going below 60% produces too many compression artifacts (macroblocks and ‘trails’, Gibbs effects and more) for many games, especially if there are large dark areas (which would get compressed more highly and have these compression effects occur in them). This doesn’t happen with all games however; some games are fast-moving and/or do not have many darker/flatter areas and using 50% quality doesn’t look too bad, even with the MJPEG codec. It’s a balancing and testing game, as some games (especially with text) look fine and others look very bad (the compressor will try to allocate more bits around edges like text and compress even more highly then, the flatter/darker areas in a scene). I have done recordings of news streams and other things however, that allow for a very low quality recording setting (down to 20%), but that is mainly because the source itself is of a low quality (many streams are highly compressed and there is not much ‘extra’ compression artifacts produced by recording it in a lower quality/bitrate, especially if you are going to downsize for the final output video).

      For most games, I found I could go down to 70% Quality comfortably – as long as the resolution stayed ‘higher’ [720p or higher]. With lower resolutions, the bitrate/quality reduction means too many ‘casualties’, as 30% of a 1080p recording isn’t that many pixels when you consider the screen size; but one-third of a 480p recording is a huge amount of the already small screen being ‘lost’ to compression. Thus, with some testing (again to what looks “ok to me“) I arrived at a middle ground of 864p, which maintains decent clarity of text and is large enough to discourage overcompression of darker/flatter areas. For keeping recorded files small and downsizing to 720p HD, it looked fine to me in tests – and on some games, doesn’t look that bad even if you wanted to upsize to 1080p HD (clear text was maintained, etc).

      So, enjoy this first installment in an ‘unofficial’ Video Series here at The Game Tips And More Blog: “Raw Gameplay” of Battlefield Play4Free. If you like the game, play it, tell others about it and buy some stuff from the Online Store and support it!

      See You In The Game!

      Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material.

      Astaxanthin – Anti-Oxidant Superstar

      While many antioxidants can be obtained by eating organic fruits and vegetables, astaxanthin is derived only from a specific microalgae called Haematococcus pluvialis.  The algae uses astaxanthin to protect itself from intense sunlight, ultraviolet radiation and low nutrition.

      There are two natural astaxanthin sources: the microalgae that produce it and the salmon and krill which consume the algae directly. The best resources for these foods are wild-caught Alaskan Salmon and Krill Oil Supplement, which offer many other nutritional benefits.

      Research indicates astaxanthin may benefit those suffering from inflammatory conditions including arthritis, rheumatoid disorders, metabolic disease, as well as cardiovascular, neurological and liver diseases.

      Astaxanthin can also help to increase your muscle capacity and stamina, decrease workout recovery time, and decrease muscle pain.  Other proven benefits include:

      Reduction of Inflammation
      Protects Vision
      Enhances Heart Health
      Decreases Oxidative Stress
      Protects Against Sunburn
      Boost Your Immune System
      Helps Prevent and Fight Cancer

      Astaxanthin and Eye Health

      Astaxanthin is an extremely powerful anti-oxidant:  65 times more powerful than vitamin C, 54 times more powerful than Beta-Carotene and 14 times more powerful than Vitamin E.
      Astaxanthin crosses the blood-brain barrier AND the blood-retinal barrier which is a huge deal for your brain AND your eyes!

      Astaxanthin is a member of the carotenoid family of anti-oxidants that include beta-carotene, lutein and zeaxanthin.   Of all the carotenoids, only zeaxanthin and lutein are found in the retinas of your eyes.  This is because your eye is a highly light and oxygen rich environment, and it needs a large amount of free radical scavengers to prevent damage. 
      Scientists have specifically studied astaxanthin for its effects on the eyes and discovered that it is completely safe, and much more potent than all the other carotenoids.   Specifically it has been shown that astaxanthin supplementation can be effective in preventing a whole list of eye diseases including:

      Age-Related Macular Degeneration
      Diabetic Neuropathy
      Cystoid Macular Edema
      Central Retinal Arterial and Venous Occlusion
      Glaucoma
      Inflammatory Eye Diseases including retinitis, iritis, keratitis, and scleritis

      Astaxanthin is one of the few anti-oxidants that you should consider supplementing because you cannot obtain the recommended dosage from your diet alone.      The good news is that there are excellent Astaxanthin Supplements available from companies like Jarrow, Doctors Best, and Swanson to name a few.   It should be taken with a meal with fat because it is fat soluble with dosage from 4mg – 12mg per day although there are no harmful effects from higher dosages.

      HOW TO DECORATE A KITCHEN MINIMALIST

      A café is a place where people meet, talk and relax. The ambience of a café is loved by many people and that is why many of them visit one daily after work so that they can talk and share things with their friends and relax after the long day. One can decorate their kitchen with a café theme so that they have a coffee shop at home, or they feel the same. Creating the same theme as that of a coffee shop is a brilliant idea to add a different touch to the kitchen and make it nice and cozy also.

      Minimalist Decorate a KitchenMinimalist Decorate a Kitchen

      Decorating the kitchen with a café theme is not at all difficult or expensive as many would think it to be. People have two options when they want to incorporate a café theme; they can either completely change everything in the kitchen or they can use what is there, and use it and still create the theme. The things that one can use along with the colors and the final touches, is what matters the most.

      A basic thing that one can add to the kitchen which will be useful also and will also help to create the café theme is to use a table with four chairs in the space. The chairs should be comfortable and for this one can add cushions to it. The table should not be crowded with too many things and under table you can opt for a modern carpet or rug.There are several types of these rugs you can get including wool area rugs, contemporary rugs and even discount area rugs that you can find online.The other thing that one can do easily is to paint the walls of a different color. The color should be bright and be chosen keeping in mind the natural light that comes in the kitchen.

      Near the table that one keeps in the kitchen, one can place a book shelf and place some nice coffee table books or books of art and poetry. Another thing that can be done to create the café theme is that one should only be able to see things related to a coffee shop in the kitchen. The table should only have sugar and coffee beans etc, the counters should only have the appliances that are used in a coffee shop like the blender or the coffee maker. It is not that the kitchen cannot have other useful appliances; all that one needs to take care of is that these should be kept in the cupboards and should not be seen as this can ruin the café theme that one wants to create.

      SMALL ROOM DESIGN IDEAS FOR TEENS

      SMALL ROOM DESIGN FOR TEENS

      SMALL ROOM DESIGN FOR TEENS

      There were many children inside, but somehow neglected to share ideas on the bed and adolescents. We will try to catch it from that position, where we’ll show you 10 ways to decorate the room of a teenager. Of course, these designs are aimed at age group 9-14 years and do not include all decorations eccentric but warm and relaxing colors. There are plenty of shelves for CDs, books and magazines, then we are also dealing with students of consciousness. I especially like the pictures on the wall of cartoons in black and white as they seem to bring personality into the room.

      SMALL ROOM DESIGN IDEAS FOR TEENS

      SMALL ROOM DESIGN IDEAS FOR TEENS

      SMALL ROOM DESIGN FOR KIDS

      SMALL ROOM DESIGN FOR KIDS

      SMALL ROOM DESIGN INSPIRATION FOR TEENS

      SMALL ROOM DESIGN INSPIRATION FOR TEENS

      SMALL ROOM INSPIRATION DESIGN FOR TEENS

      SMALL ROOM INSPIRATION DESIGN FOR TEENS

      How to Overcome a Negative Habit



      Habits are powerful.  Unfortunately, they often are created outside our consciousness and without our permission. However, we can consciously change habits. Habits shape our lives far more than we realize— they are so strong, in fact, that they can cause our brains to cling to them at the exclusion of all else, including common sense.
      At the same time, positive habits can change our lives for the better. So how are habits created and what can we do to influence them in ourselves and our clients?
      Three Parts of a Habit
      The Cue: a situational trigger that is based on a reward you are seeking.
      The Routine:  a physical or emotional action you take to obtain the reward.
      The Reward:  the satisfaction you get by following the habit.

      The Steps to Changing a Habit
      Identify the Routine:  You must identify how you go from a particular cue to the routine of the habit and the reward it gives you.
      Understand Cravings and Rewards

      The first part of a habit is the cue, but before the cue there is some type of craving.  Cravings drive habits.   Understanding cravings is key to figuring out habits.  In a habit, there is a specific reward that satisfies a particular craving.    In other words, figure out what you are getting from the habit because you ARE getting something from it!
      Rewards are powerful because they satisfy cravings. But we’re often not conscious of the cravings that drive our behaviors. For example, when developing the air freshening product Febreze marketers discovered that people craved a fresh scent at the end of a cleaning ritual.  They found a craving that people were not aware of.     This craving is so strong that without added scent most people do not get satisfaction from an air freshener that just removes odors from the air – they have to smell the scent!   It is exactly the same phenomenon with breath freshners which can be made to eliminate odor WITHOUT any taste/scent, but no one buys them!
      Most cravings are like this: obvious in hindsight, but difficult to discern when they are in control of your behavior. It is critical to discover the cravings that drive habits to be able to change or create habits!   To figure out which cravings are driving particular habits, it’s useful to experiment with different rewards. For example, say your reward is having a cookie after studying every night.  The next time you study deliberately substitute something else for the cookie such as going for a short walk or having a cup of tea instead. 
      The next time eat an apple and another time change call a friend for call, etc. What you choose to do instead of eating a cookie is not important.  The key is to test different hypotheses to determine the exact craving that is driving your routine.   Are you craving the cookie itself, or a break from work? If it’s the cookie, is it because you’re hungry? (In which case the apple should work just as well.) Or is it because you want the burst of energy the cookie provides? (And so coffee may work just as well.) Or is it where you eat the cookie and who you are with?  Do you go to a specific place to get and eat your cookie?  If so maybe the real craving may have to do with a desire to socialize.  
      As you test four or five different rewards, use this technique to identify patterns.  After each activity, note the first three things that come to mind after your reward behavior. This can be emotions, random thoughts, reflections on how you’re feeling, or just the first three words that pop into your head. Then, set an alarm on your watch or computer for fifteen minutes. When it goes off, ask yourself: Do you still feel the urge for that cookie? The reason why it’s important to write down three things— even if they are meaningless words— is twofold. First, it forces a momentary awareness of what you are thinking or feeling.
      By experimenting with different rewards, you can isolate what you are actually craving, which is essential in changing a habit.
      Determine the Specific Cue for the Habit

      This is the trigger that initiates the craving for the reward.   So it is very important to learn the cues for habits.   Common cues including being in a particular place, being with a particular person, a particular time of time of day, a specific emotional state, etc.    Asking yourself these five questions can be very helpful for identifying cues:
      Where are you when the urge for a reward hits you?
      What time is it?
      What is your emotional state?
      Who else is present?
      What did you do right before you had the urge?
      Have a Plan!
      Once you understand the habit you want to change you need to create a plan to change the habit!   The easiest way to do that is have a specific plan of action whenever you experience the cue or cues.    For example, if you smoke when you have coffee know this and plan to do something else deliberately whenever you have a cup of coffee.   The plan is key or you will slip right back into the old routine.
      Another example is having a few beers every night when you get home.  Through the first three steps you discover that having the beer helps you relax after a stressful day.    You also learned that going for a 20-minute walk or doing Tai Chi gives you that same reward of feeling relaxed.   So now you plan to either go for a walk or do Tai Chi ever day as soon as you get home (or even better before you get home!).

      good representation of the concepts

      Paperless Mission #10: Distributing Student Assignments

      This is the tenth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

       

      Mission #10: Distribute Student Assignments through Shared Folders

      Once my students had their iPads, I needed to figure out a way to get their work out to them. At first I tried using Edmodo, but that proved to be a bit glitchy for assignments where I wanted students to work with the materials in a different app like GoodReader. I needed to figure out an easy to manage workaround. Welcome back, Dropbox!
      To do this, I created a new folder on Dropbox called “Student Assignments.” I then right-clicked on the folder to pull up the option to “share link.”
      This pulls up a new window that shows the internal content of the folder in the background. Here, you could enter in a bunch of email addresses, but I prefer to click on “Get link.” This copies a link to your clipboard for you to paste somewhere else.
      Once I had the link to the folder, I put it in a highly visible spot on my class website. My students use my class website constantly, so getting to the link was easy for them once they knew where to find it. 
      Once the folder was shared, I started to create the internal contents of the folder. I created 6 folders inside — one for each day of the week and an archive folder. 
      I numbered the days of the week to control the order of the files. Dropbox will alphabetize the folders otherwise.
      As I gather resources or assignments that I want students to access, I save them as pdf files and I just put them in the folder to match the day that I expect them to do the assignment. At the end of the week, I move everything into the Archive folder, and I start over creating the assignments for next week. 
      This system has worked incredibly well for me! Here’s why:
      • Items in Dropbox sync immediately, so if we’re in the middle of working on something and I realize that I’ve forgotten to give students something that would be helpful, I can just drag it into the folder. I don’t have to sprint down to the copier. 
      • It’s the ultimate organizer for absent students. If a kid misses class on Tuesday, they (and their parents) know to go to the Tuesday folder to see what assignments are there. There’s no more worrying about lost papers or assignments.
      • The archive folder provides a great back-up for lost work. If a parent can’t find a reading or a study guide to help before a test, there’s an easy place to go to see all of the work.
      • It only requires a one-time set-up. Since I’m sharing the external folder and not the individual folders or assignments, I can change out what’s inside the folder without having to get a new link to share. 
      • It doesn’t require any log-ins or sign-ups from my students. They don’t have email yet, and they don’t have Dropbox accounts of their own, but that doesn’t matter. Accessing shared files on Dropbox doesn’t require a log-in of any sort. 

      I’ve been incredibly happy with this system. Everything that I would have copied in the past has been easily distributed through my shared folder in Dropbox. 

      What are some other ways you could use shared folders in Dropbox? I’d love to hear your ideas in the comments.

      BLACK WALL INTERIORS DESIGN IDEAS FOR A MODERN HOME

      Are you brave enough to try a deep impression on the black walls at home? A dramatic effect can be created on the walls of blacks is unique, and it takes courage and commitment to create an interior decorated with beautiful black walls. A black-painted walls, chalkboard walls, elegant black background, or even some black accents can change the look of the interior.

      High ceilings and lots of natural light conditions seem to enjoy blacks the walls in my room, but even the smallest spaces can look modern and stylish, if all other elements are chosen to enhance the contrast and the dark walls. Some of you are going to see the inside is a piece of furniture in bright colors and decorations that mitigate the effects of black walls, others will benefit from natural light, some are painted on wood or walls, wallpaper, and applications – but all ideas have two things in common: the courage and well-designed structures.

      BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

      BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

      How to Get Rid of Cellulite

      Although the vast majority of woman have some cellulite somewhere on their body – nobody likes it!   So what the heck is cellulite anyway?  Cellulite is pockets of fat that have squeezed between bands of tissue, called septae, that are located below your skin.

      Women of all races get it, while virtually no men do. That’s because the septae of men are different from women. Men have stronger bands that are cross-hatched allowing them to keep fat in place more effectively. Women have weaker, vertically oriented septae that allows fat to squeeze through easier.

      Both thin and heavy women have cellulite. However the higher your level of body fat the more noticeable the dimpling will tend to be.  Unfortunately dieting does necessarily help eliminate cellulite. Losing weight helps sometime, but in some cases weight loss makes cellulite worse.   This occurs when skin becomes saggy after significant weight loss.

      There is a definite genetic component to cellulite which does run in families.
      Hormones also are part of the equation with cellulite, but science has not figured out exactly how hormones contribute to cellulite.  What is known is that cellulite starts at puberty which is a time that many hormone levels change significantly in females.

      Getting Rid of Cellulite

      Getting rid of cellulite is easier said than done.  Even treatments like Liposuction are not necessarily effective.    In fact Liposuction often makes cellulite worse by leaving your skin even more puckered looking than it was before.

      Dermatologists are quick to point out that there is no magic cure for cellulite, but there are ways to make it look better!   Two of the keys are working out and dropping excess weight sensibly (1lbs per week! – faster weight loss can exacerbate the problem!)

      Resistance training is key.   As you increase your muscle size and decrease body fat your skin looks smoother.     If you lose fat while you simultaneously build muscle your cellulite will improve.
      It is also important to work on the health of your skin as you age to make it more elastic so that as you lose fat the skin pulls tight rather than sagging.    

      Certain topical treatments that increase collagen in the skin, like Retin-A or creams with retinol or vitamin C, cannot hurt and may help.   

      Maintaining adequate water intake is also key for skin health and elasticity – 6 – 8 glasses of water per day is key.

      If you have faithfully tried everything and your cellulite is driving you crazy and you are prepared to spend some serious dollars – Cellulaze – is an FDA approved therapy.  Cellulaze involves inserting a lazer under the skin and projects heats in three directions and literally liquefies fat as it cuts the septae around fat cells which can reduce the puckering while also encouraging collagen regrowth.

      Cellulaze claims a 70 – 80% improvement in cellulite that lasts a full year.  It is most effective for active women with mild to moderate cellulite who are not significantly overweight and who also have good muscle tone.

      Unfortunately, Cellulaze is not cheap – costing $5,000 – $7,000 depending on the size of the area being treated.

      Teachers’ voices matter, and I want to hear from you!

      Hi bloggy friends! I know it’s been forever since I’ve updated this blog, and trust me — lots of ideas are percolating in the hopper about my flipped(!) fourth grade classroom and other things I’ve tried this year. I promise those posts are coming! But in the meantime, I need your help!

      As some of you may know, I’m working on my PhD in addition to teaching fourth grade full-time. The work-life balance has not been an easy thing, and now, I’m really working hard to finish as much coursework as possible in the short term because baby #2 will be arriving in November! (So while you all are hanging out by the pool having tasty margaritas, I’m crunching numbers for a stats class and reading about how to write ethnographic fieldnotes. Good times, I tell you…)

      This summer, I’m starting to work on my dissertation, and I’m testing out my ideas in a pilot study. I’m planning to write my dissertation about the amazing elementary blogging community and the ways that teachers use blogs for professional development and personalized learning. I know that reading other teachers’ blogs has been hugely inspiring for me as a teacher, and I can’t imagine what I would do if I didn’t have access to so many great teaching minds across the globe. Shockingly, however, very little has been written about these great online communities and their benefits, and I want to explore that further. Scholars, politicians, and administrators need to know how much teachers learn from each other! Which is why I need your help.

      I’m looking for a few teachers who would be willing to be interviewed about how they use blogs to support their work in the classroom. I want to talk to both bloggers and readers, so even if you don’t have a blog of your own, I’d still like to talk to you. This first wave of interviews will take place next week (June 20-26) and they will all be done online via Skype or Google Hangouts. I anticipate that each interview will last 45-60 minutes.

      If you are willing to participate, could you please fill out this form so I can contact you directly? In exchange for your time, anyone who participates in an interview will receive up to $20 worth of free products from my TpT store.

      Loading…
      Once you fill out the form, I will be in touch to arrange a time that will work best for the interview. I need to conduct (and transcribe!) at least 3 interviews next week to fulfill the requirements of my current coursework, but don’t let that small number deter you — I will need many more interview participants once I move beyond my pilot study and begin work on my actual dissertation, so I’d love to have a list of possible interviewees already started. And my offer for the free products from my TpT store will still stand.

      I hope that you will consider participating! I look forward to talking to you and learning from you.

      The 2017 Extra Life 24-Hour Gaming Marathon, In Support of The Children’s Miracle Network Hospitals [Post Updated All Weekend]

      Wow, it’s that time again – time to try to play some games for a cause – in my case, I play as much as I can through the weekend for the Alberta Children’s Hospital Foundation (as I was born and raised in the province of Alberta, Canada).

      This year actually ‘sprung up’ on me, as I haven’t been feeling well these past few weeks… I have had a bit of a fever [38C/100F+]  the entire time and have been extra sore and slow (I say ‘extra’ as I myself have a condition, called Myalgic Encephalomyelitis – which is basically an infection of the brain and spine that causes Fibromyalgia and Chronic Fatigue symptoms (pain and tiredness, respectively) – a condition I have had for 12 years now [wow it’s been that long]). So, playing for this charity every year is special to me and something I have tried to do every since I heard of Extra Life back in 2015.

      Image Link to The Extra Life main website, where you can see all of the other wonderful people participating in this event, many of them streaming their marathon Live on Twitch and other streaming sites! (Link opens in a new window)

      Due to my own illness then, I cannot play 24 hours straight through, but I count my gaming hours Playing For The Kids™ over the entire weekend of the event (in this years’ case, Saturday November 4th and Sunday November 5th), hopefully tallying 24 hours in total.. (in the case that I am not ‘up to it’ for that long, I allow myself to count my wife’s gaming time, as she generously tries to play beside me and add hours, for a “Total Household Hours” amount). [I always hope that in the spirit of the event and the intention, that my dear readers and those at Extra Life find this acceptable]

      As has occurred in past years, I do not have the ability/energy to set up and maintain a constant Stream of some sort yet (through Twitch, YouTube and other streaming services); but what I do is I share some details and Screenshots (and Videos if I can) of what I am able to play, here at The Blog, in an ongoing and updated post – one that I will be adding to as the weekend progresses (including Sunday Night), right here!

      So, follow along with me as I Play For The Kids™ all weekend, updating this very post as I go – and if you wish to take part, you can Pledge/Donate directly to the Extra Life charity via the Logo/Image just below or through this link for 2017: https://www.extra-life.org/participant/247989 – and whether you pledge anything or not, feel free to just return to this posting for gameplay time Updates, Screenshots, some Video Clips from the weekend – and more!

      See You In The Game!

      Update, Saturday 12:30PM MST: Beginning The Marathon, with the initial post above and gathering snacks and drinks to start Playing For The Kids™!

      Update, Saturday 7:30 PM MST: As usual with this event, I always try to play some good’ol Minecraft Hardcore Mode (you only get one life!), to see how far I can get during the marathon.

      Usually, I don’t get too far and starting out this year was no exception. I spawned in a new Hardcore world – in a wintery biome which I found out later was “Cold Taiga” – which meant, although there were plenty of Trees for Wood to use, there were no seeds to find and plant right away for food, there were no large hills in sight (for easy access to Stone and Coal to cook any foods I might come across) except in the far distance – and as night fell, I died right away to a band of two skeletons and a zombie that came out from behind one of the many, many trees…. Wow what a harsh start!

      I began another Hardcore world, hoping to spawn in a relatively easier biome – and I did… I quickly collected Seeds from the Grass around me and began a Garden to grow Wheat RIGHT AWAY, heh. I had to cull some of the many Pigs I found around me in order to eat, planning on replenishing their numbers later on. I then carved out a little Mud Hut in the hillside nearby and settled in for the night…

      Updates on that World as I play more – but for now I have to stop and take another break. More to come!

      Total Gameplay Time: ~2.0 hrs

      Update, Sunday 10:30 AM MST: I played last night right up until I fell asleep, starting a “Just One Life™” character in Fallout 4 (where I stop playing and delete that character upon dying just once), and was popping into various games for short periods of time, like Marvel Heroes (which has Daily Login Rewards, with small ‘gifts’ every few days you enter the game – and a Free Hero available at the no doubt-difficult-to-get-to, Day 300) [Even if I do not have the energy to play for a while, I try to pop in to register a login, heh – to see how far I can go].

      I also popped into The Elder Scrolls: Legends, a Virtual Collectible Card Game based on The Elder Scrolls series [a good game for slow-paced-yet-still-kinda-flashy-and-enjoyable gameplay that you can play against the CPU/AI only, if you desire to]. I also ran a few Benchmarks and did a few quick driving tests in Grand Theft Auto V, trying out some settings I saw in YouTube videos online (to see if I get the same framerate with the same hardware) – but I felt a bit weird at the concept of playing GTA games for this Event [shouldn’t I be playing games kids would play, or at least Family-Friendly games? lol], so I didn’t stay in Los Santos very long.
      Today, I plan on playing as much as I can, continuing my Minecraft: Hardcore Mode world, and my Fallout 4 “Just One Life™” character, along with some Elder Scrolls Online gameplay, hoping to get up to 24 hours in Total. I’ll also post more Screenshots next Update. Here I go!
      Total Gameplay Time: ~ 5.0 hrs


      Update, Monday 9:30 AM MST: Well I played as much as I could… 
      In Minecraft, I continued my Hardcore Mode world (actually Marathon 2017 World 2.0, as I died without even leaving the first Biome in the first one (above)), making a nice Garden along the shore of a River nearby…
      When night fell upon the world, since I was out on a ‘walkabout’, looking around the Biome, I quickly dug into the nearest hill, making myself a small mudhut house to Craft and Cook in… I should have maybe stayed in it all night, but I thought I would get started on collecting more Food, by killing a few Spiders and using their silk to make String, crafting a Fishing Pole.. And what happened? Two Skeletons came out from behind a tree and as I ran back toward my little ‘second mud hut’, they cornered me and filled me full of arrows, as I weakly flailed my Rock Sword back and forth… I hope my ‘Deeds Will Be Remembered’ [hehe Diablo2]
      To make myself feel better, I popped in an out of a few games for the next few hours… I tried out Need for Speed: Most Wanted, which seemed like an open-world racing game, with good graphics.
      Playing that game reminded me of a ‘test’ I wanted to do (I love running Benchmarks and Tests, heh) with Grand Theft Auto Five (GTAV), where I saw a video of someone running it on High Settings, to test out the differences between how it performed on two different CPUs (Processors, referring to the ‘main engines’ of a computer). So I started up GTAV and ran the Benchmark (to see if I got similar results) and drove around the city a bit.
      While the game looked good, I felt a little weird playing such a ‘mature’ game during a Marathon for children’s charities [lol shouldn’t I be playing ‘family friendly games’? or does it matter?], so I just took a few Screenshots (of course), and then left it for now, for something else.

      The Beta for Paladins, a MOBA-slash-FPS game by the makers of Tribes:Ascend and Smite, was going on, so I popped into that game, going through the Training and playing for a while afterward.


      Total Gameplay Time: ~ 10.0 hrs

      Alas, just like before, I couldn’t quite make the 24 Hours on my own… My own illness [where I am sore a lot and get tired easily] keeps me from playing for very long at one time. However, as I stated earlier, what I like to do, is include the game playing time that My Better Half does alongside me, as part of a “Household Total”… If I include her generous contribution, the new total becomes:

      Total Household Time: ~23.0 hrs


      Haha – even with her inclusion, I did not ‘quite’ make the 24 Hours in total… But, as stated above, I hope that in the spirit of the Marathon and its’ intention – and mine – I hope that what did accrue would be acceptable… In fact; I do not think that ‘total game time’ is the main goal of this Marathon… This time is perhaps to literally ‘take time’, to think about those that are much more unfortunate than us, and in the case of this Charity, much younger than most of us… During this Day or Weekend, whichever it is, I think, we remember those out there, those that are in need. In this spirit/state-of-mind; I thank you Dear Reader, for following along in this small adventure. Whether you donated at all or not, I hope that you played a little bit of some game, took a little bit of time, to think about those that are in much more pain and need than most of us are. And I thank you for following me on this small journey. Take care, my unmet friend – and perhaps See You In The Game.

      Blog Hunting

      Today I was hoping to link up with Laura Candler’s Corkboard Connections Blog Hunt, but it seems that linky closed already [sadface].  Still, I want to share a little about what I’m using as my Google Reader alternative and why.


      In my mind, this is a battle between BlogLovin’ and Feedly.

      BlogLovin’

      I’ll confess that I didn’t move over to this platform initially. As soon as I caught wind a few months ago that Google Reader was dying, I quickly packed up and moved over to Feedly. With all of the recent push in the teacher-blogger community toward BlogLovin’, however, I decided to give it another try.
      What I like
      As a blogger, there are a few features that I really like about BlogLovin’. 
      1. Notifications and Blog Finding
      I like that I can get notifications when new people start following me. I also like that when I click on those notifications, I can see what other blogs people are reading. I’ve stumbled upon some great new-to-me blogs that way over the past few days. 
      2. Viewing actual blogs
      Rather than seeing a stripped down version of someone’s blog, I can see the actual website in a BlogLovin frame. This allows for easy commenting when I want to leave comments. It also lets me see how cute everyone’s blog is these days.
      What I dislike
      1. Too many clicks
      It seems like it takes forever to navigate sometimes, and I’m constantly clicking to mark things read, jump between blogs, and if I actually leave a comment on a blog, I lose my place in BlogLovin and have to start over with the remaining unread blogs. I subscribe to hundreds of blogs, so I have to be efficient when I’m looking at content. 
      2. It’s still buggy
      I tried to go back and organize the blogs that I read into categories the other night, and I found that BlogLovin wasn’t saving my organizational changes for blogs unless I categorized them as soon as I started following them. That was annoying. I also noticed that some blogs that I’m certain I was already following were showing up as unfollowed. Others were showing up multiple times in my reading list. I suspect that a lot of these bugs will improve — I saw iPad updates for the app yesterday, so I know they’re working on it, but I wish a lot of these features were already working better.

      Feedly

      Since I’ve been using this for a few months already, I’ll openly confess that I’m a bit biased. It may also be the case that I’ve got this platform more figured out than BlogLovin, and some of the “advantages” of Feedly may exist in BlogLovin, too. But here’s what I’ve found…
      What I like
      1. Better app integration
      There are several different apps that I like to use when I’m reading blogs (and in this case, I’m talking about web-based apps, not iPad apps).
      Pinterest – Feedly has Pinterest integration built in, so I can hover over an image and pin it straight from Feedly. The pin will link back to the original blog.
      Buffer – Buffer is an app that I use to schedule Tweets so that they’re spaced out throughout the day rather than sent all at once as I read blogs. If I read a blog post that I really like, I’ll send it to Buffer to share with others.
      IFTTT – If This Then That is an app that sets up certain actions based on commands that I give. For example, if I star an article that I like in Feedly, it will automatically send it to my Evernote notebook with tags that I set. There’s a whole list of IFTTT recipes for Feedly here. 
      Evernote – I can send items straight to my Evernote notebook from Feedly as one of the sharing options.

      2. Easy navigation
      There are lots of easy keyboard shortcuts to use to go through articles when I’m reading on my computer, and it’s very easy to organize articles in categories. Even when I’m behind in my blog reading, I can get through it pretty quickly without feeling like I’m missing important content.

      3. Marking articles
      I know I can “heart” articles on BlogLovin, but I can mark articles on Feedly for later with specific tags that make them easier for me to find. For me, that’s a better equivalent to starring articles on Google Reader, and I did that a lot.

      What I dislike
      1. Somethings get lost in translation
      Sometimes the pictures don’t get pulled into Feedly correctly (which might not be Feedly’s fault), and I probably miss out on some cool content because of it.

      2. Commenting is more complicated
      I still have to click to go to the external link of the original blog post to comment or read comments. This is especially complicated when I’m using the iPhone or iPad apps. When I’m on a mobile device, I usually mark the article I want to comment on for later and check it out when I’m back to my computer.

      And the winner is…Feedly, mostly

      At least for now, I’m sticking with Feedly. I still like visiting BlogLovin’ to find new blogs to follow, but my new strategy is to follow on BlogLovin’, and then I add it to a list called “On My Feedly.” Then I add the blog to one of my reading lists on Feedly. Then when I go into BlogLovin’, I can immediately mark the “On My Feedly” list as read because I’ll know I’ve seen it all on Feedly. There are a bunch of new blogs that I started following as I was trying out BlogLovin’ that aren’t on my Feedly list yet, so that will be a process to move those over. It’s not a perfect system, but I expected some growing pains in the transition. 
      I’m going to continue to use BlogLovin to discover new blogs because that’s a huge benefit in my mind.
      Where did you land in the Google Reader alternative battle? I’d love to hear what you chose and why in the comments section! 

      My trip to Kuala Lumpur, Malaysia and Singapore, July 2010

      This was my first trip on a budget airline (Air Asia); it definitely changed my opinion of budget airlines. This trip is more a business development and prospecting trip rather than an assignment. On the surface KL does look developed. However I have my doubts regarding the psyche of the Malaysians. I took in the usual site such as the Petronas Tower etc. The weather, the fauna and flora resembles Colombo; I did not enjoy the high humidity and the afternoon thundershowers.

      Singapore was as usual (I have stopped counting the number of times I have been there) very orderly and hit the usual shopping and fun places. In my opinion the Singaporeans have not only developed in terms of the look and feel of the place but also in terms of the psyche of the people. I truly believe that they do think like westerners and the Japanese.